LG Projector PH300 User Manual

							31USING	THE	PROJECTOR
Using	the	projector
1 When in standby mode, press the POWER button to turn the projector on.
2 Press the INPUT button and select the input signal you want.
3 Control the projector using the following buttons while watching the screen.
ButtonDescription
CH	,Changes the TV channel.
LISTDisplays the channel list.
0	-	9Enters a channel number.
VOL	+,	-Adjusts the volume level.
MUTE	Mutes the sound from the projector.
Q.MENUEnters the quick menu. (See page 38)
FLASHBKDisplays the channel you were watching previously.
4 To turn the projector off, press the POWER button.  
						

							32USING	THE	PROJECTOR
Setting	Channel
Image shown may differ from your projector.
Saving	Currently	Broadcasting	Channel
Using	the	Auto	Tuning	function
Saves a channel which is currently broadcasting. Be sure to activate Auto	Tuning when you move to a new home or change the position of your projector. When you activate this function, make sure that the antenna i\
s connected and there are channels broadcasting signals.
1 Press the SETTINGS button.
2 Press the  ,  ,  , or  button to select CHANNEL and press the OK button.
3 Press the  ,  button to select Auto	Tuning and press the OK button.
4 Select Start to start auto tuning. The projector scans and saves available channels automatically.
5 When you are finished, press the SETTINGS button.
Saving	or	Deleting	Channels	Manually
1 Press the SETTINGS button.
2 Press the  ,  ,  , or  button to select CHANNEL and press the OK button.
3 Press the  ,  button to select Manual	Tuning and press the OK button.
4 Scroll through the channel types, and then add or delete channels.
5 When you are finished, press the SETTINGS button.

•	If Lock	System is turned on, a pop-up window will appear asking for 
password. 
•	 You can store up to 1000 channels. The number of channels 
that you can store differs depending on the broadcasting signal 
environment.
•	 Auto	Tuning memorizes the channels that are currently being 
broadcast.
•	 The channels are stored in the order of DTV, TV, Cable DTV and Cable TV.\
NOTE  
						

							33USING	THE	PROJECTOR
Editing	Your	Channel	List
1 Press the SETTINGS button.
2 Press the  ,  ,  , or  button to select CHANNEL and press the OK button.
3 Press the  ,  button to select Channel	Edit	and press the OK button.
4 Edit a channel by using the buttons below.

0026004B0044005100510048004F000300280047004C0057 000300030024005100570048005100510044
00330044004A0048000300140012
001600100014 001800100014001A00100014
002700370039
00370039002600440045004F00480003002700370039 002600440045004F0048000300370039
1BD500030024004700470012 1BD500030025004F00520046004E0012000300290044005900520055004C0057
1BD20003003000520059004800031BD900030032002E
00290024
ButtonDescription
RedAdds or deletes a channel.
GreenBlock or unblock a channel.
FAVAdds a favorite channel.
5 When you are finished, press the SETTINGS button.   
						

							34USING	THE	PROJECTOR
Favorite	Channel	Setup
1 Press the SETTINGS button.
2 Press the  ,  ,  , or  button to select CHANNEL and press the OK button.
3 Press the  ,  button to select Channel	Edit	and press the OK button.
4 Move to your desired channel.
5 Press the FAV button to access the Set	as	Favorite.
6 Press the  ,  buttons to to scrolls through channel group.
7 Press the OK button.

003600480057000300440056000300290044005900520055004C0057004800360048004F004800460057
00300058004F0057
002A005500520058005300030024002A005500520058005300030025
002A005500520058005300030026
002A005500520058005300030027
0032002E 00260044005100460048004F  
						

							35USING	THE	PROJECTOR
Additional	Options
Adjusting	Aspect	Ratio
1 Press the Q.MENU button.
2 Press the  ,  buttons to select Aspect	Ratio and press the OK button.
MenuDescription
16:9Resizes images to the 16:9 ratio.
Just	Scan
Displays video images in the original size without removing parts of the edge of the image.
•	If you select Just	Scan, you may see image noises at the edge or edges of the screen.
Set	By	ProgramDisplays images in the same aspect ratio as the original image.
4:3Resizes images to the previous standard 4:3.
Zoom
Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off.
•	Press the  or  button to zoom in or out of the image.
•	Press the  or  button to move the image.
Cinema 	Zoom	1
Formats an image to the cinemascope ratio, 2.35:1. It ranges from 1 to 16.
•	Press the  or  button to zoom in or out of the image.
•	Press the  or  button to move the image.
•	If you enlarge or reduce an image, the image may be distorted.

•	Available picture size may differ depending on the input signal.
•	You can also use the SETTINGS button.
NOTE  
						

							36USING	THE	PROJECTOR
Using	the	Keystone	Function
To prevent the screen image from becoming trapezoidal, Keystone adjusts the top and bottom width of the image if the projector is not se\
t up at a right angle to the screen.
Because the Keystone function may cause inferior screen image quality, use this function only when it is not possible to set up the projector a\
t an optimal angle.

0003000306120003002E0048005C00560057000300130701002F0003003506FD
0026004F005200560048
1 Press the SETTINGS button.
2 Use the  ,  ,  , or  buttons to select OPTION	2 and press the OK button.
3 Use the  or  buttons to select Keystone and press the OK button.
4 Use the  or  buttons to adjust Keystone.
5 Keystone can be adjusted from -40 to 40.
6 Press the OK button when finished.
Changing	input	device
To	select	an	external	input
You can select inputs connected to the projector.
•	Press the INPUT button on the remote control to display the input selection screen. -Connected inputs are displayed first.
•	Select an input signal using the remote control's INPUT button to connect the projector to the desired input.You can use the  or  button to switch between all the input modes.

002C00510053005800570003002F004C00560057
00370039003800360025 002B00270030002C
1BD20003003000520059004800031BD900030032002E
0028005B004C0057
002C0051005300580057    
						

							37USING	THE	PROJECTOR
Selecting	an	Input	Label
Displays which devices are connected to which input ports.

002C00510053005800570003002F004400450048004F
002B00270030002C
0026004F005200560048
1 Press the INPUT button on the remote control to display the input selection screen.
2 Use the Red	button.
3 Use the  or  button to select one of the input labels.
Blank	Function
Using	the	Blank	Function
This function may be effective when you need to draw attention during a meeting or training.
1 Press the BLANK button, and the screen is covered by the background color. You can change the background color by referring to "Selecting the background color of the blank image".
2 Press any button to clear the blank function. To cover the screen temporarily, press the BLANK button on the remote control. Do not 
block the lens with any object while the projector is running. It may become overheated and deformed or even cause a fire.  
						

							38USING	THE	PROJECTOR
Selecting	the	background	color	of	the	blank	image
1 Press the SETTINGS button.
2 Press the  ,  ,  , or  buttons to select OPTION	2 and press the OK button.
3 Press the  ,  buttons to select Blank	Image and press the OK button.
4 Press the  or  button to move to the setting or option you want and press the OK button.
Using	the	Quick	Menu
You can easily customize your frequently used menus.
1 Press the Q.MENU button.
2 Press the  or  button to select a menu and press OK button.
MenuDescription
Aspect	RatioResizes the picture.
PJT	ModeTurns the projected image upside down or flips it horizontally.
Picture	ModeChanges the picture mode.
SAPSets MONO or STEREO, or a language for a bilingual broadcast.
Sleep	TimerSets the projector to be turned off at the specified time.
Clear	Voice	IIMakes the voice from the projector crisp and clear.
Del/AddCan delete or add channels.
USB	Device
Allows you to remove a connected USB device in a safe manner.
(The menu is displayed only when the USB device is connected.)
3 Press the  ,  button to scroll through the following menus.  
						

							39MY	MEDIA
MY	MEDIA
Before	Using
Connecting	a	USB	Device
Connect a USB device (external HDD, USB memory) to the USB port of projector to enjoy the content files stored in the USB device with your projector. You cannot write or delete data in the USB device. Connect a USB flash drive as shown below.
 
USB flash Drive
Removing	a	USB	Device
1 Press the Q.MENU button.
2 Use the  or  button to move to USB	Device and press the OK button.
3 Select a USB to remove. Wait for confirmation that the USB device has stopped before removing the USB.

•	If detached early, an error may occur on the projector or the USB 
storage device.
•	 Once a USB device has been selected for removal, it can no longer 
be read. Remove the USB storage device and then re-connect it.
NOTE  
						

							40MY	MEDIA
Tips	for	using	a	USB	device
•	If the USB storage device has a built-in auto recognition program or uses its own driver, it may not work.
•	Some USB storage devices may not work or may work incorrectly.
•	If you use a USB extension cable, the USB device may not be recognized or may not work properly.
•	Use only USB storage devices formatted with the Windows FAT32 or NTFS file system.
•	For external USB HDDs, it is recommended that you use devices with a rated voltage of less than 5 V and a rated current of less than 500 mA.
•	It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supplied is not enough, the USB storage device may not be detected properly.)
•	It is recommended that you use USB flash drives of 32 GB or less and USB HDDs of 1 TB or less.
•	If a USB HDD with power-saving function does not work properly, turn the power off and on. For more information, refer to the user manual of the USB HDD.
•	Data in USB storage device can be damaged so be sure to back up important files to other devices. Data maintenance is the user's responsibility and the manufacturer is not responsible for data loss.