LG Projector PH300 User Manual

Owner's Manual
DLP PROJECTOR
PH300
Please read the safety information carefully before using this product.
www.lg.com  

2LICENSES
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more information and software tools to...

3LICENSES
This device meets the EMC requirements for home appliances (Class B) and is intended for home usage. This device can be used in all regions.

•	Image shown may differ from your projector. 
•	 Your projector’s OSD (On Screen Display) may differ slightly from 
that shown in this manual.
NOTE  

4SAFETY	PRECAUTIONS
SAFETY	PRECAUTIONS
Please take note of safety instructions to prevent any potential acciden\
t or misuse of the product.
•	Safety precautions are given in two forms, i.e. WARNING and CAUTION. WARNING and CAUTION are understood to mean as follows: WARNING:  Failure to follow the instructions may cause serious injury and even death  CAUTION:  Failure to follow the instructions may cause minor injury to people or damage to the product
•	Read the owner's manual carefully and keep it...

5SAFETY	PRECAUTIONS
•	Do not place flammable materials such as aerosols near the projector. -This may result in fire.
•	Do not allow children to cling to or climb up to the projector. -This may cause the projector to fall, causing injury or death.
•	Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a closet) or on a carpet or cushion. -This may result in fire due to the increase in internal temperature.
•	Do not place the product close to sources of steam, oil or oil...

6SAFETY	PRECAUTIONS
•	Be careful not to tip the projector over when connecting external devices to the projector. -This may cause personal injury or damage to the projector.
Power
	WARNING
•	The appliance coupler is used as the disconnect device.  -Please make sure the device is installed near the wall outlet to which it is connected and that the outlet is easily accessible.
•	The grounding wire should be con nected. -Ensure that you connect the ground ing cable to avoid electric shock.If it is not...

7SAFETY	PRECAUTIONS
•	Place the projector where people will not trip over or tread on the power cord to protect the power cord and plug from any damage. -This may result in fire or electric shock.
•	Do not turn the projector on or off by plugging in the power plug or unplugging it from the wall outlet.  (Do not use the power plug as a switch.) -This may result in electric shock or damage to the product.
•	Do not insert a conductor into the other side of the wall outlet while the power plug is inserted...

8SAFETY	PRECAUTIONS
•	Never open any cover on the projector.  -There is a high risk of electric shock.
•	Do not look directly into the lens when the projector is in use.  -The bright light may damage your eyes.
•	When the lamp is on or has just been turned off, avoid touching the air vent or lamp, because these will be very hot.
•	If there is a gas leak in the room with the projector, do not touch the projector or power outlet. Open the windows for ventilation. -Sparks may cause fire or burns.
•	Never...

9SAFETY	PRECAUTIONS
•	Do not drop anything onto the projector or allow anything to impact the projector. -This may cause personal injury or the projector to malfunction.
•	It is recommended that you maintain a distance of more than 5 - 7 times the diagonal length of the screen. -If you watch the screen at a close distance for a long time, your eye sight may become worse.
•	Do not block the light beam emitted from the projector using a book or other object. -Lengthy exposure to the projector beam may...

10SAFETY	PRECAUTIONS
•	When cleaning plastic parts, such as the projector case, disconnect the product from the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. Never use glass cleaner, automobile or industrial shiner, abrasives or wax, benzene, alcohol, etc. when cleaning plastic parts, such as the projector case as they can damage the product. -This may also create a fire hazard, result in electric shock or product damage (deformation, corrosion or breakage).
•...