LG LCD Television 55LW9800 Owners Manual

ASSEMBLING AND PREPARING31
Tidying cables
PZ750, PZ950, PZ950U series
1Install the power cord holder and power cord.
-It will help prevent the power cable from being
removed by accident.
2Gather and bind the cables with the cable
holder.
Install the LAN cable as shown to reduce the
electromagnetic wave.
CAUTION
•Do not move the TV by holding the cable
holder and power cord holder, as the
cable holders may break, and injuries and
damage to the TV may occur.LV3700, LV5400, LV5500, LV9500, LW5600,
LW5700,...

32REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
andends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
•Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the...

REMOTE CONTROL33
VOL
Adjusts the volume level.
MARK
Selects a menu or option.
FAV(See p.43)
Accesses your favorite channel list.
CHAR/NUM
Switches between Letter and Number input modes.
RATIO(See p.45)
Resizes an image
MUTE
Mutes all sounds
DELETE
Deletes letters and numbers.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
VOL
Adjusts the volume level.
MARK
Selects a menu or option.
FAV(See p.43)
Accesses your favorite channel list.
CHAR/NUM
Switches between Letter and...

34REMOTE CONTROL
Premium
Accesses the Premium menus.
Home(See p.41)
Accesses the Home menu.
Q. MENU(See p.47)
Accesses the quick menu.
3D OPTION(for 3D TV)
Used for viewing 3D video.
Navigation buttons(up/down/left/right)
Scrolls through menus or options.
ENTER
Selects menus or options and confirms your input.
BACK
Returns to the previous level.
INFO
Views the information of the current program and screen.
EXIT
Clears all on-screen displays and returns to TV viewing.
ENGLISHM U T E
B A C K E X I TE N T E...

REMOTE CONTROL35
Color buttons
These access special functions in some menus.
Control buttons
Controls the Premium contents, Smart Share menus, or the SIMPLINK
compatible devices (USB, SIMPLINK).
FREEZE(
)
Freezes the current frame (Not supported when using USB Mode and
Simplink).
SIMPLINK(See p.117)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
RATIO(See p.45)
Resizes an image.
ENGLISHC HV O L P
A
G
E
F A V
M U T EM A R K
D E L E T EC H A R / N U M
B A C K E X I TE N T E R Q . M E...

36REMOTE CONTROL
Magic Motion Remote Control Functions
LV3700, LV5400, LW5700, LK530, LK550 series: Supports the Magic Motion remote control, which is sold
separately. Refer to the Magic Motion Remote Control manual for operating instructions.
Please read this manual carefully and use the TV correctly.
When the message“Magic motion remote control battery is low. Change the
battery.”is displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching...

REMOTE CONTROL37
Registering Magic Motion Remote
Control
The Magic Motion Remote Control operates by
pairing with your TV.
Register the Magic Motion Remote Control to use
it.
How to register the Magic Motion Remote Control
To register the remote control, press theENTER
button on the remote control while aiming it at your
TV.
How to Re-register the Magic Motion Remote
Control after Registration Failure
Reset the remote control by pressing and holding
both theENTERandMUTEbuttons for 5 seconds.
(Once the...

38WATCHING TV
WATCHING TV
Connecting to an antenna or
cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and a RF cable is
optional.
Connecting an antenna or basic
cable
Connect the TV to a wall antenna socket with an RF
cable (75Ω).
NOTE
•Use a signal splitter to use more than 2 TVs.
•Visit http://lgknowledgebase.com for more
information about the antenna and cable
connection. Search for antenna.
Connecting a...

WATCHING TV39
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1Connect the power cord to a power outlet.
2In Standby mode, press the power button on the
remote control to turn the TV on.
The Initial setting screen appears if you turn the
TV on for the first time.
NOTE
•You can also accessInitial Settingby
accessingOPTIONin the Home menu -
SETUP.
3Follow the on-screen instructions to...

40WATCHING TV
Watching TV
1In Standby mode, press the power button on the
remote control to turn the TV on.
2PressINPUTand selectTV.
3Control the TV using the following buttons while
you are watching TV.
ButtonDescription
CH(
^,v)Scrolls through saved channels.
LISTSelects a channel on the saved or
recent watched channel list.
0–9
Selects a channel by entering
numbers.
VOL (+, -)Adjusts the volume level.
MUTEMutes all sounds.
AV MODE
1Selects an AV mode (See p.46).
Q.MENUAccesses the quick menus (See...