LG LCD Television 55LW9800 Owners Manual

							ASSEMBLING AND PREPARING31
Tidying cables
PZ750, PZ950, PZ950U series
1Install the power cord holder and power cord.
-It will help prevent the power cable from being
removed by accident.
2Gather and bind the cables with the cable
holder.
Install the LAN cable as shown to reduce the
electromagnetic wave.
CAUTION
•Do not move the TV by holding the cable
holder and power cord holder, as the
cable holders may break, and injuries and
damage to the TV may occur.LV3700, LV5400, LV5500, LV9500, LW5600,
LW5700, LW6500, LW9800 series
1Gather and bind the cables with the cable holder
on the TV back cover.
or
LK530, LK550 series
1Gather and bind the cables with the cable
management clip.
2Fix the cable management clip firmly to the TV.
ENGLISH     A
C   IN  
						

							32REMOTE CONTROL
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
andends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
•Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
POWER
Turns the TV on or off.
LIGHT(Depending on model)
Illuminates the remote control buttons.
ENERGY SAVING(See p.88)
Adjusts the brightness of the screen to reduce energy consumption.
AV MODE(See p.46)
Selects an AV mode.
INPUT(See p.46)
Changes the input source. Turns the TV on.
TV
Returns to the last TV channel.
Alphanumeric buttons
Enters letters and numbers.
LIST(See p.43)
Accesses the saved channel list.
- (Dash)
Inserts a dash between numbers such as 2-1 and 2-2.
FLASHBK
Alternates between the two last channels selected (pressing repeatedly).
ENGLISH    E N E R G Y
C HV O L1 2   A B C
3   D E F
4   G H I
5   J K L
6   M N O
7 P Q R S
8   T U V
0 9   W X Y Z
P
A
G
ES A V I N G
T VA V   M O D E I N P U T L I G H T
F A V
3 D
M U T EM A R K
D E L E T EC H A R / N U ML I S T F L A S H B K
3 D   O P T I O N
H o m e
P r e m i u m Q . M E N US M A R T   T VE N E R G Y
C HV O L1 2   A B C
3   D E F
4   G H I
5   J K L
6   M N O
7 P Q R S
8   T U V
0 9   W X Y Z
P
A
G
ES A V I N G
T VA V   M O D E I N P U T L I G H T
F A V
3 D
M U T EM A R K
D E L E T EC H A R / N U ML I S T F L A S H B K
3 D   O P T I O N
H o m e
P r e m i u m Q . M E N US M A R T   T V   
						

							REMOTE CONTROL33
VOL
Adjusts the volume level.
MARK
Selects a menu or option.
FAV(See p.43)
Accesses your favorite channel list.
CHAR/NUM
Switches between Letter and Number input modes.
RATIO(See p.45)
Resizes an image
MUTE
Mutes all sounds
DELETE
Deletes letters and numbers.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.
VOL
Adjusts the volume level.
MARK
Selects a menu or option.
FAV(See p.43)
Accesses your favorite channel list.
CHAR/NUM
Switches between Letter and Number input modes.
3D(for 3D TV) (See p.84)
Uses for viewing 3D video.
MUTE
Mutes all sounds.
DELETE
Deletes letters and numbers.
CH
Scrolls through the saved channels.
PAGE
Moves to the previous or next screen.ENGLISHC HV O L1 2   A B C
3   D E F
4   G H I
5   J K L
6   M N O
7 P Q R S
8   T U V
0 9   W X Y Z
P
A
G
ES A V I N G
F A V
M U T EM A R K
D E L E T EC H A R / N U ML I S T F L A S H B K
R A T I O
S M A R T   T V C HV O L1 2   A B C
3   D E F
4   G H I
5   J K L
6   M N O
7 P Q R S
8   T U V
0 9   W X Y Z
P
A
G
ES A V I N G
F A V
3 D
M U T EM A R K
D E L E T EC H A R / N U ML I S T F L A S H B K
3 D   O P T I O NS M A R T   T V  
						

							34REMOTE CONTROL
Premium
Accesses the Premium menus.
Home(See p.41)
Accesses the Home menu.
Q. MENU(See p.47)
Accesses the quick menu.
3D OPTION(for 3D TV)
Used for viewing 3D video.
Navigation buttons(up/down/left/right)
Scrolls through menus or options.
ENTER
Selects menus or options and confirms your input.
BACK
Returns to the previous level.
INFO
Views the information of the current program and screen.
EXIT
Clears all on-screen displays and returns to TV viewing.
ENGLISHM U T E
B A C K E X I TE N T E R 3 D   O P T I O N
H o m eP r e m i u m Q . M E N US M A R T   T V
I N F O  
						

							REMOTE CONTROL35
Color buttons
These access special functions in some menus.
Control buttons
Controls the Premium contents, Smart Share menus, or the SIMPLINK
compatible devices (USB, SIMPLINK).
FREEZE(
)
Freezes the current frame (Not supported when using USB Mode and
Simplink).
SIMPLINK(See p.117)
Accesses the AV devices connected to the TV;
Opens the SIMPLINK menu.
RATIO(See p.45)
Resizes an image.
ENGLISHC HV O L P
A
G
E
F A V
M U T EM A R K
D E L E T EC H A R / N U M
B A C K E X I TE N T E R Q . M E N U
I N F OR A T I O
H o m eP r e m i u mS M A R T   T VR A T I O F R E E Z E P l a s m a  
						

							36REMOTE CONTROL
Magic Motion Remote Control Functions
LV3700, LV5400, LW5700, LK530, LK550 series: Supports the Magic Motion remote control, which is sold
separately. Refer to the Magic Motion Remote Control manual for operating instructions.
Please read this manual carefully and use the TV correctly.
When the message“Magic motion remote control battery is low. Change the
battery.”is displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
andends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control at the remote control sensor on the TV. To remove
the batteries, perform the installation actions in reverse.
CAUTION
•Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control at the remote control sensor on the TV.
①Pointer (RF transmitter)
Blinks the light when operating.
②Home
Accesses the Home menu.
③Navigation buttons(up/down/left/right)
Scrolls through menus or options.
④VOL
Adjusts the volume level.
CH
Scrolls through the saved channels.
⑤MUTE
Mutes all sounds.
⑥
(POWER)
Turns the TV on or off.
⑦ENTER
Selects menus or options and confirms your input.
Press this button to display the pointer when it disappears from the
screen.
If you press the navigation button while moving the pointer on the
screen, the pointer disappears, and the Magic Motion remote control
works as a regular remote control.
To display the pointer again, shake the Magic Motion remote control
from side to side within 2 minutes after it disappeared. (If 2 minutes
have passed, press the Enter button to display the pointer.)
ENGLISH        
						

							REMOTE CONTROL37
Registering Magic Motion Remote
Control
The Magic Motion Remote Control operates by
pairing with your TV.
Register the Magic Motion Remote Control to use
it.
How to register the Magic Motion Remote Control
To register the remote control, press theENTER
button on the remote control while aiming it at your
TV.
How to Re-register the Magic Motion Remote
Control after Registration Failure
Reset the remote control by pressing and holding
both theENTERandMUTEbuttons for 5 seconds.
(Once the reset is complete, the light on the
Pointer blinks.) Then repeat the above procedure to
register the remote control.
How to use Magic Motion Remote
Control
1PressENTERbutton if there is no pointer on
your TV screen. The pointer will then appear on
the screen.
If the pointer has not been used for a certain
period of time, it will disappear.
2You can move the pointer by aiming the Pointer
Receiver of the remote control at your TV then
move it left, right, up or down.
If the pointer does not work properly after
clicking theENTERbutton, leave the remote
control for 10 seconds then use it again.
Precautions to Take when Using
the Magic Motion Remote Control
•Use the remote control within the maximum
communication distance (10 m, 32.8ft). Using
the remote control beyond this distance, or with
an object obstructing it, may cause a
communication failure.
•A communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as this will use the same
bandwidth (2.4 GHz) as the Magic Motion
Remote Control.
•The Magic Motion Remote Control may be
damaged or may malfunction if it is dropped or
receives a heavy impact.
•When playing a game using the Magic Motion
Remote Control, hold it securely by wrapping its
strap around your wrist and adjusting the length
with the adjustable ring.
•Take care not to bump into nearby furniture or
other people when using the Magic Motion
Remote Control.
•Manufacturer and installer cannot provide
service related to human safety as the applicable
wireless device has possibility of electric wave
interference.
•It is recommended that an Access Point (AP) be
located more than 1 m (3.28 ft) away from the
TV. If the AP is installed closer than 1 m (3.28 ft),
the magic motion remote control may not
perform as expected due to frequency
interference.
ENGLISH  
						

							38WATCHING TV
WATCHING TV
Connecting to an antenna or
cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and a RF cable is
optional.
Connecting an antenna or basic
cable
Connect the TV to a wall antenna socket with an RF
cable (75Ω).
NOTE
•Use a signal splitter to use more than 2 TVs.
•Visit http://lgknowledgebase.com for more
information about the antenna and cable
connection. Search for antenna.
Connecting a cable box
Connect the TV to a cable box and the cable box to
a wall antenna socket with 2 RF cables (75Ω).
CAUTION
•Make sure not to bend the copper wire of
the RF cable.
•Complete all connections between devices,
and then connect the power cord to the
power outlet to prevent damage to your TV.
ENGLISH      
						

							WATCHING TV39
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1Connect the power cord to a power outlet.
2In Standby mode, press the power button on the
remote control to turn the TV on.
The Initial setting screen appears if you turn the
TV on for the first time.
NOTE
•You can also accessInitial Settingby
accessingOPTIONin the Home menu -
SETUP.
3Follow the on-screen instructions to customize
your TV settings according to your preferences.
LanguageSelects a language to
display.
▼
Mode SettingSelectsHome Usefor the
home environment.
▼
Power IndicatorSets the standby light.
(For LED LCD TV)
▼
Time ZoneSelects the time zone and
daylight saving.
▼
Network SettingSets your network to
enable network-related
feature on the TV. (For
LV9500, LW9800 series) ▼
Auto TuningScans and saves available
channels automatically.
NOTE
•To display images in the best quality for
your home environment, selectHome
Use.
•Store Demois suitable for the retail
environment.
•If you selectStore Demo, the any
customized settings will switch back to
the default settings ofStore Demoin 5
minutes.
•Power Indicator feature is disabled in
Store Demo mode.
4When the basic settings are complete, press
ENTER.
NOTE
•If you do not complete the Initial setting,
it will appear whenever the TV turns on.
•Disconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
5To turn the TV off, press the power button on
the remote control.ENGLISH    
						

							40WATCHING TV
Watching TV
1In Standby mode, press the power button on the
remote control to turn the TV on.
2PressINPUTand selectTV.
3Control the TV using the following buttons while
you are watching TV.
ButtonDescription
CH(
^,v)Scrolls through saved channels.
LISTSelects a channel on the saved or
recent watched channel list.
0–9
Selects a channel by entering
numbers.
VOL (+, -)Adjusts the volume level.
MUTEMutes all sounds.
AV MODE
1Selects an AV mode (See p.46).
Q.MENUAccesses the quick menus (See
p.47).
FLASHBKAlternates between the last two
channels selected.
RATIOResizes an image (See p.45).
FREEZE
(
)Freezes the current frame while you
are watching TV
1EachAV modehas the optimized image and
sound settings. If you selectOff, the image
and sound settings will be restored to the
previously customized settings.
4To turn the TV off, press the power button on
the remote control.
The TV switches to Standby mode.
ENGLISHP l a s m a