LG LCD Television 55LW9800 Owners Manual

ASSEMBLING AND PREPARING21
LK530 series
Rear Connection panel (see p.103)
ButtonDescription
/ ITurns the power on or off.
INPUT Changes the input source.
HOME Accesses the Home menu, or saves your input and exits the menus.
ENTERꔉ
Selects the highlighted menu option or confirms an input.
–VOL + Adjusts the volume level.
vCH^Scrolls through the saved channels.
1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
ENGLISHR e m o t e   c o n t r o l   a n d  
i...

22ASSEMBLING AND PREPARING
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
CAUTION
•Avoid touching the screen at all times, as
this may result in damage to the screen.
•It is recommended to move the TV in the box or
packing material that the TV originally came in.
•Before moving or lifting the TV, disconnect the
power cord and all cables.
•When holding the TV, the...

ASSEMBLING AND PREPARING23
3Secure the TV and the stand with the 4 screws.
ModelScrew for
assemblyNumber of
screws
50PZ750,
50PZ950,
50PZ950UM4 x 264
60PZ750,
60PZ950,
60PZ950UM4 x 284
CAUTION
•Tighten the screws firmly to prevent the
TV from tilting forward. Do not over
tighten.To detach the stand,
1Lay the TV with the screen side down on a flat
surface.
2Remove the 4 screws and pull the stand away
from the TV.
3Push the supplied protection cover into the
opening at the bottom of the TV until it locks...

24ASSEMBLING AND PREPARING
LV3700, LV5400, LV5500, LW5600, LW5700,
LW6500 series
1Lay the TV with the screen side down on a flat
surface.
CAUTION
•Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
2Assemble the parts of the stand body with the
stand base of the TV.
ModelScrew for
assemblyNumber of
screws
LV3700, LV5400,
LV5500, LW5600,
LW5700 series,
47/55LW6500M4 x 124
65LW6500M4 x 164
3Assemble the TV as shown....

ASSEMBLING AND PREPARING25
LV9500, LW9800 series
1Lay the TV with the screen side down on a flat
surface.
CAUTION
•Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
2Assemble the parts of the stand body with the
stand base of the TV.
Screw for assembly
Number of screws
M4 x 164
3Assemble the parts of the stand rear cover with
the TV.
4Secure the TV and the stand with the 4 screws.
Screw for assembly
Number of screws
M4...

26ASSEMBLING AND PREPARING
LK530, LK550 series
1Lay the TV with the screen side down on a flat
surface.
CAUTION
•Lay a foam mat or soft protective cloth
on the surface to protect the screen from
damage. Make sure no objects press
against the screen.
2Assemble the parts of the stand body with the
stand base of the TV.
Screw for assembly
Number of screws
M4 x 204
3Assemble the TV as shown.
4Secure the TV and the stand with the 4 screws.
Screw for assembly
Number of screws
M4 x 204
CAUTION
•Tighten the...

ASSEMBLING AND PREPARING27
3Push the supplied protection cover into the
opening at the bottom of the TV until it locks in
place.
This will protect the opening from accumulating
dust and dirt.
When installing the wall mounting bracket, use
the Protection cover.
ENGLISHP r o t e c t i o n   c o v e r  

28ASSEMBLING AND PREPARING
Mounting on a table
1Lift and tilt the TV into its upright position on a
table.
-Leave a 10 cm (4 inch) (minimum) space from
the wall for proper ventilation.
2Connect the power cord to a wall outlet.
CAUTION
•Do not place the TV near or on sources of
heat, as this may result in fire or other
damage.
NOTE
•Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
Securing the TV to a table
(For 32LW5700, 42LK530, 42LK550)
Fix the TV to a table to...

ASSEMBLING AND PREPARING29
Securing the TV to a wall (optional)
1Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
•Make sure...

30ASSEMBLING AND PREPARING
Mounting on a wall
Attach an optional wall mount bracket at the rear of
the TV carefully and install the wall mount bracket
on a solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel. LG recommends that
wall mounting be performed by a qualified
professional installer.
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard dimensions
for the wall mount kits are described in the...