LG Hs200 Projector User Manual

Function22
1.  
Press the  MENU button. Then, move to  SCREEN with the ∧, ∨ , ＜ , ＞   
buttons and press the  ◉OK  button.
2.   
Press the  ∧, ∨  buttons to move to  RGB Config. and press the  ◉OK   
button.
3.  Move to a desired item with the  ∧, ∨  buttons and then press the  ＞ button.
4.   
Press the  ∧, ∨ , ＜ , ＞  button to adjust the screen condition as you want 
and then press the  ◉OK  button.
•   
Resolution  can be chosen between 768 resolution 
(1024x768/1280x768/1360x768, 60Hz) and 1050...

Function
23
AUDIO Menu Options
FM Wireless Audio is a function to send out audio signals from the projector using FM frequency (88.5 ~95.5 MHz).
The frequency of Projector and FM receiver should be same in order to output the sound from FM receiver normally.
The signal can be received by using FM receiver within 3m of distance.
What is FM Wireless Audio? (HS200/HS200G only)
< The recommended use range of FM receiver >
Install projector and FM receiver without any abstacles as shown on the figure below.
A...

Function24
• This product is for domestic use.
•   
If used in a medical institution, it may cause an error for medical equipments.Please do not use in a medical 
establishment.
•    Please maintain the distance between the projector and FM receiver within 3m.
•   
The sound from FM receiver may not come out in the desired quality if the distance is more than 3m.
•   
Please adjust the location of FM receiver and its antenna and install them to where it shows a good condition 
of receiving reception.
•...

Function
25
To listen through the FM receiver speaker (HS200/HS200G Only)
Adjusting Volume
   Press the VOLUME +, - button on the remote control.
• If FM Wireless Audio is  on, it does not function. Adjust with FM receiver.
•  You can use this function through the  MENU button.
AUDIO
FM Wireless Audio : Off
  • Frequency   88.5 MHz
Volume       50
Balance       0
Treble       0
LR
1.   Press the  MENU button. Then, move to  AUDIO with the  ∧, ∨ , ＜ , ＞ 
buttons and press the  ◉OK  button.
2.   
Press the...

Function26
Adjusting Speaker Balance
Adjusting Treble
AUDIO
FM Wireless Audio  : Off
  • Frequency   88.5 MHz
Volume       50
Balance       0
Treble       0
LR
AUDIO
FM Wireless Audio  : Off
  • Frequency   88.5 MHz
Volume       50
Balance       0
Treble       0
LR
1.  
Press the  MENU button. Then, move to  AUDIO with the  ∧, ∨ , ＜ , ＞ 
buttons and press the  ◉OK  button.
2.   
Press the  ∧, ∨  buttons to move to  Treble and press the  ◉OK  button.
3.   
Press the  ＜, ＞  buttons to adjusting audio...

Function
27 * The sleep timer turns the projector off at the preset time.
1. Press the  Q.MENU button on the remote control.
2.    Press the  ∧, ∨  buttons to move to  Sleep Timer.
3.  Press the  ＜, ＞  buttons to select a desired preset time.
•  You can use this function through the  MENU button.
•  To exit the menu display, press the  RETURN button.
Sleep time Function
Auto Off Function
TIME Menu Options
1.  
Press the  MENU button. Then, move to  TIME with the  ∧, ∨ , ＜ , ＞ 
buttons and press the  ◉OK...

Function28
1. Press the  BLANK button on the remote control.
• The screen turns off to a background color.
•  You can choose the background color.
    (Refer to ‘Selecting Blank image’)
2. Press any button to cancel the blank function.
•   
To temporarily turn off the lamp, press  BLANK on the remote control. Do not block the projection lens with any objects 
when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire. 
Using Blank Function
*...

Function
29
1.   Press the  MENU button. Then, move to  OPTION with the  ∧, ∨ , ＜ , ＞  
buttons and press the  ◉OK  button.
2.   
Press the  ∧, ∨  buttons to move to  Auto Power and press the  ◉OK 
button.
3.   
Press the  ∧, ∨  buttons to move to  On and press the  ◉OK  button.
• On: Connecting DC cable to the projector turns on the projector.
•  Off:   
Connecting DC cable to the projector makes the projector in standby 
state.
•  Press the  MENU or RETURN button to exit the menu screen.
To make the...

Function30
Demo Mode Function
Initial Setting Function
INFORMATION Menu Options
1.  
Press the  MENU button. Then, move to  INFORMATION with 
the  ∧, ∨ , ＜ , ＞  buttons and press the  ◉OK  button.
2.  You can see the current information of the projector.
•  Press the  MENU or RETURN button to exit the menu screen.
To See The Projector Information
1.  
Press the  MENU button. Then, move to  OPTION with the  ∧, ∨ , ＜ , ＞ 
buttons and press the  ◉OK  button.
2.   
Press the  ∧, ∨  buttons to move to  Demo...

Q-Menu
Close
16:9
Off
Aspect Ratio
Picture Mode
Sleep Timer
Eject USB
USB
31 *   When you connect a USB device, this screen is displayed, automatically.
  In USB device, you can not add a new folder or delete the existing folder.
 
►   
Only a USB storage device is recognizable. Digital camera and mobile phone are not supported.
 
►  
If the USB storage device is connected through a USB hub, the device is not recognizable.
 
►   
A USB storage device using an automatic recognition programmed may not be...