LG Hlt45w Owners Manual

							21Inst\bll\btion
Inst\bll\btion	3
USB Connection
Connect the USB port of USB Memory \for M\b3 
player, etc.) to the USB port on the front of the 
unit.
USB Connect\bon
Removing the USB Device from the unit
1.  Choose a different function mode or 
press \bTOP \f
x) twice in a row.
2.   Remove the USB device from the unit.
Compatible USB Devices
• M\b3 \blayer : Flash type M\b3 player.
• USB Flash Drive :   Devices that support 
USB2.0 or USB1.1. \V
• The USB function of this unit \Vdoes not 
support some USB devices.
USB device requirement
• Devices which require additional program 
installation conne\Vcted to a computer, are 
not supported.
• Do not extract the USB device while in 
operation.
• For a large capacity USB, it may take longer 
than a few minutes to be searched.
• To prevent data loss, back up all data\V.
• If you use a USB extension cable or US\VB 
hub, the USB device is not recognized.
• Using NTFS file syst\Vem is not supported. 
\fOnly FAT\f16/32) file system is supported.)
• This unit is not su\Vpported when the total 
number of files is \V1 000 or more.
• External HDD, Card readers, Locked devices,   
or hard type USB devices are not supported.
• USB port of the unit cann\Vot be connected 
to \bC. The unit can not be\V used as a storage 
device.
HLT35W-F2_DZAFLLK_ENG_4969.indd   212011-04-14   �� 12:09:12 
						

							22Inst\bll\btion
Inst\bll\btion	3
OPTICAL In connection
Connect an optical outpu\Vt of Unit \for Digital 
Device etc) to the O\bTICAL IN co\Vnnector.
OPTICAL IN Connect\bon
To t\fe digital 
optical output jack 
of your component
Home theater speaker ez setup
Listen to sound from TV, DVD and Digital 
Device with 2.1 or 2ch mode. Even in power off 
mode, if you press OPTICAL, then power is on 
and automatically changed \Vto AUX O\bT mode.
1. Connect the unit’s O\bTICAL IN jack t\Vo jack 
on optical out of \Vyour TV \for Digital Device 
etc.).
2. Select the AUX O\bT by using the OPTICAL.
To select the AUX O\bT directly
3. Listen to sound with 2.1 o\Vr 2ch speaker.
4. To escape from AUX O\bT by using the 
OPTICAL.
Function is retuned to previous one.
Antenna Connection
Connect the supplied FM antenna for listening 
to the radio.
Connect the FM Wire antenna to the FM 
antenna connector.
Antenna Connect\bon
NOTE
Be sure to fully extend the FM wire antenna. 
After connecting the FM wire antenna, keep it as 
horizontal as possible.
HLT35W-F2_DZAFLLK_ENG_4969.indd   222011-04-14   �� 12:09:13 
						

							23Inst\bll\btion
Inst\bll\btion	3
Adjust the setup 
settings
By using the Setup menu, you can make 
various adjustments t\Vo items such as picture 
and sound.
You can also set a \Vlanguage for the subtitles 
and the Setup menu, among other things\V. For 
details on each Setup menu item, see pages 23 
to 27.
OSD Initial languag\se settings
During the first use of\V this unit, the in\Vitial 
language setup menu \Vappears on your TV 
screen. You must complete initial language 
selection before using the unit. E\Vnglish will be 
selected as the initial \Vlanguage.
1. \bress 1 (POWER) to turn the unit on. The 
language setup menu \Vwill appear on the\V 
screen.
2. Use U u I i to select a language then 
press  ENTER. 
The confirm menu will appear\V.
3. Use I i to select the [Enter] then press  
ENTER to finish the language\V setup.
To display and exit \sthe Setup 
menu
1. \bress  HOME.
Displays the [Home Menu].
2. Select a [Setup] by using I i.
3. \bress  ENTER.
Displays the [Setup]
4. \bress  HOME or O RETURN to exit in 
the [Setup] Menu.
About \felp menu for \betup
MenuButtons Operation
v V
MoveU uMoving to another 
menu.
b
MoveIMoving to previous 
level.
B 
Movei
Moving to next level 
or selecting menu.
O 
Close
O 
RETURN
To exit the [Setup] 
menu or [ 2.1 
Speaker Setup].
 
\belect ENTERTo confirm menu.
HLT35W-F2_DZAFLLK_ENG_4969.indd   232011-04-14   �� 12:09:13 
						

							24Inst\bll\btion
Inst\bll\btion	3
Language
Menu Language
Select a language for the Setup menu and 
then on screen display.
Disc Audio / Disc Subtitle / Disc 
Menu
Select the language you prefer for the audio 
track \fdisc audio), subtit\Vles, and the disc men\Vu.
[Original]
Refers to the original language in whi\Vch the 
disc was recorded.
[Ot\fer]
To select another language, press numeric 
buttons and then  ENTER to enter the 
corresponding 4-digit number according 
to the language code \Vlist on the page 39\V. If 
you enter the wrong language code, press 
CLEAR.
[Off (for Disc \bubtitle)]
Turn off Subtitle.
Display
TV Aspect
Select which screen aspect to use based on 
the shape of your TV screen. 
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide\V TV is connected.
Display Mode
The Display Mode setting works only when the 
TV Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on th\Ve 
upper and lower portions of the screen.
[Panscan]
Automatically displays the wide picture 
on the entire screen and cuts off th\Ve 
portions that do not fit. \fIf the disc/file is not 
compatible with \ban Scan, the picture is 
displayed at Letterbox ratio.)
Resolution
Sets the output resolution of the H\VDMI video 
signal. Refer to page 19 or detail\Vs about the 
resolution setting.
[Auto]
If the HDMI OUT jac\Vk is connected to 
TVs providing display information \fEDID), 
automatically selects the resolution best 
suited to the connected TV.
[1080p]
Outputs 1080 lines\V of progressive video.
[1080i]
Outputs 1080 lines\V of interlaced video.
[720p]
Outputs 720 lines \Vof progressive video.
[576p (or 480p)]
Outputs 576 \for 480) lines of pr\Vogressive 
video.
[576i (or 480i)]
Outputs 576 \for 480) lines of in\Vterlaced 
video.
HLT35W-F2_DZAFLLK_ENG_4969.indd   242011-04-14   �� 12:09:13 
						

							25Inst\bll\btion
Inst\bll\btion	3
Audio
\f.1 Speaker Setup
Make the following settings for the built-in 2.1 
channel surround decoder.
1. Select [2.1 Speaker Setup] on the [Audio] 
menu.
2. \bress  ENTER.
The [2.1 S\bEAKER] ap\Vpears.
3. Use I i to select the desired speaker.
4. Adjust options usin\Vg U u I i buttons.
5. Returns to the previous menu by pressing 
O RETURN.
[\bpeaker selection]
Select a speaker that you want to adjust.
NOTE
Certain speaker settings are prohibited by the 
Dolby Digital licensing agreement.
[\bize]
Since the speaker settings are fixed, you 
cannot change the s\Vettings.
[Volume]
\bress I i to adjust the outpu\Vt level of the 
selected speaker.
Front L/R : 0 ~ -5 
SubWoofer : 5 ~ -5
[Distance]
If you connect speakers to your unit, setting 
the Distance lets \Vthe speakers to know how 
far the sound has \Vto travel to reach your set 
listening point. This allows the sound from 
each speaker to reach the listener at the 
same time. \bress I i to adjust the Dista\Vnce 
of the selected speaker.
[Test]
Select [Speaker Test Start] by using the U u 
and press  ENTER. \bress  ENTER again 
to stop. Adjust the volume to match the 
volume of test signals memorized in the 
system.
DRC (Dynamic Range Control) 
Make the sound clear \Vwhen the volume is 
turned down \fDolby Digital only). Set to [On] 
for this effect.
Vocal 
Select [On] to mix karaoke channels into 
normal stereo.
This function is effective for multi-channel 
karaoke DVDs only.
HLT35W-F2_DZAFLLK_ENG_4969.indd   252011-04-14   �� 12:09:13 
						

							26Inst\bll\btion
Inst\bll\btion	3
HD AV Sync
Sometimes Digital TV encounters a delay 
between  picture and sound. If this happens 
you can compensate by setting a delay on the 
sound so that it effectively ‘waits’ for the picture 
to arrive: this is called \VHD AV Sync. Use U u 
\fon the remote control) to scroll up and down 
through the delay amount, which you can set 
at anything between 0 and 300m sec\V.
Semi Karaoke 
When a chapter/ title/ track is fully finished, this 
function shows the score in the screen with a 
fanfare sound.
[On]
When you finished singing a score will 
appear on the screen.
[Off ]
Fanfare and score do not appear on\V the 
screen.
NOTE
•  DVD, DVD Karaoke discs with more than 2 
tracks are available discs for this function.
•   When you watch movies, “off ” the Semi 
Karaoke at the SETU\b menu or enjoy it without 
connecting the MIC if the\V fanfare or score 
appears during changing a chapter.
•   This function operate on the DVD/CD mode.
•   The Semi Karaoke function is available only 
when a microphone is connected. 
Connecting speakers
You can set up wireless connection manually, 
when your connection is not comple\Vted. Refer 
to page 15.
Lock (Parental Control)
Initial Setting the Area Code:
When you use this unit f\Vor the first time, you 
have to set the Area Code.
1. Select the [Lock] menu and then\V press i.
2. \bress i.
To access the [Lock] options, you must 
input the password you have created. Input 
a password and press  ENTER. Enter it 
again and press  ENTER to verify. If you 
make a mistake before pressing  ENTER, 
press CLEAR.
3. Select the first character using U u buttons.
4. \bress  ENTER and select the second 
character using U u buttons.
5. \bress  ENTER to confirm your Area code 
selection.
Rating
Blocks playback of rated DVDs based on their \V
contents. Not all discs ar\Ve rated.
1. Select [Rating] on the [Lock] menu then 
press i.
2. Input a password and press  ENTER.
3. Select a rating from 1 to 8 using the U u 
buttons.
[Rating 1-8]
Rating one \f1) has th\Ve most restrictions and 
rating eight \f8) is t\Vhe least restrictive.
[Unlock]
If you select unlock, parental control is not 
active and the disc pla\Vys in full.
4. \bress  ENTER to confirm your rating 
selection.
HLT35W-F2_DZAFLLK_ENG_4969.indd   262011-04-14   �� 12:09:13 
						

							27Inst\bll\btion
Inst\bll\btion	3
Password
You can enter or change password.
1. Select [\bassword] on the [Lock] menu and 
then press i.
2. \bress  ENTER.
3. Input a password and press  ENTER.
  To change the password, press  ENTER 
when the [Change] option is h\Vighlighted. 
Input a password and press  ENTER. Enter 
it again and press  ENTER to verify.
4. \bress  HOME to exit the menu.
NOTE
If you forget your password, you can clear it us\Ving 
the following steps:
1.  Select the [Setup] menu on the \V[Home] menu.
2.  Input the 6-digit number “210499” and press 
 ENTER. The password is cleared.
Area Code
Enter the code of the\V area whose standards 
were used to rate the DVD video disc, based 
on the list on page\V 40.
1. Select [Area Code] on the [Lock] menu then 
press i.
2. Input a password and press  ENTER.
3. Select the first character using U u buttons.
4. \bress  ENTER and select the second 
character using U u buttons.
5. \bress  ENTER to confirm your Area code 
selection.
Others
DivX VOD
ABOUT DIVX VIDEO: DivX® is a d\Vigital video 
format created by DivX, Inc. This is an official 
DivX Certified device that plays DivX video. 
Visit www.divx.com for more information and 
software tools to convert your files into DivX 
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX 
Certified® device must be registered in order to 
play DivX Video-on-Demand \f VOD) content.  
To generate the registration code, locate the 
DivX VOD section in the device setup menu. 
Go to vod.divx.com with thi\Vs code to complete 
the registration process and learn more about 
DivX VOD.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the 
deactivation code.
NOTE
All the downloaded videos fr\Vom DivX VOD with 
this player’s registration code can\V only be played 
back on this unit.\V
HLT35W-F2_DZAFLLK_ENG_4969.indd   272011-04-14   �� 12:09:14 
						

							28Oper\btion
Oper\btion	4
Using the Home Menu
1. \bress  HOME.
Displays the [Home Menu].
2. Select an option by using I i. 
3. \bress  ENTER then selected option menu.
[Music] – Displays [MUSIC] menu.
[Movie] – Start video media’s playback or 
display the [MOVIE] menu.
[\bhoto] – Displays [\bHOTO] menu.
[Setup] – Displays the [Setup] menu.
NOTE
You can not select the [Music], [Movie] or [\bhoto] 
option when the US\VB device is not connec\Vted or a 
disc is not inserted.
Basic Operations
1. Insert the disc by using the Z OPEN/
CLO\bE or Connect the USB device to the 
USB port.
2. \bress  HOME.
Displays the [Home] Menu.
3. Select an option by using I i.
If you select the [Movie], [\bhoto] or [Music] 
option when you connect up to two 
devices, it appears as be\Vlows. Select a 
media then press  ENTER. 
4. \bress  ENTER then selected option menu.
NOTE
•   For the most Audio CD and DVD-ROM discs, 
playback starts automatically.
•   The unit plays only music file \Vcontained in the 
USB storage device or disc automatically.
4
Operation
HLT35W-F2_DZAFLLK_ENG_4969.indd   282011-04-14   �� 12:09:14 
						

							29Oper\btion
Oper\btion	4
ToDo t\fis
Stop \bress x (\bTOP)
\blayback\bress	B (PLAY), MONO/
\bTEREO.
\bause\bress X (PAU\bE/\bTEP).
Frame-
by-Frame 
playback
\bress X (PAU\bE/\bTEP) 
repeatedly to play title 
Frame-by-Frame. \fDVD, DivX 
only)
Skipping to 
the next/ 
previous 
chapter/ track/ 
file
During playback, press	
./> \bKIP to go to 
the next chapter/ track/ 
file or to return to the 
beginning of the current 
chapter/ track/ file.
\bress . \bKIP twice 
briefly to step back to the 
previous chapter/ track/ file.
Locating a 
point quickly 
by playing 
a file in fast 
forward or fast 
reverse
During playback, press 
m/M \bCAN repeatedly 
to select the required scan 
speed.
To return to normal speed, 
press B (PLAY), MONO/
\bTEREO.
\blaying 
repeatedly or 
randomly
\bress s REPEAT 
repeatedly, and the current 
title, chapter or track will b\Ve 
played back repeatedly or 
randomly. 
- DVD : Chapter/ Title/ Off
- DivX : Title/ All/ Off
-  Audio CD/ M\b3/ WMA : 
Track/ All/ Random/ Off
Slowing down 
the playing 
speed
In the pause mode, press 
SLOW \fbb or BB) to 
select the required speed. 
\fDVD, DivX only) The DivX 
file cannot be slow down 
reverse playback.
Other Operations
Displaying Disc Information 
on-screen
You can display various information about the 
disc loaded on-screen.
1. \bress  INFO/DI\bPLAY to show various 
playback information. 
The displayed items differ depending on 
the disc type or playing status.
2. You can select an item by pressing U u and 
change or select the setting by pressing  
I i.
Title –   Current title number/ \Vtotal number of 
titles.
Chapter –   Current chapter number/ total 
number of chapters.
Time – Elapsed playing time.
Audio –  Selected audio language or\V channel.
Subtitle – Selected subtitle.
Angle –  Selected angle/ total number of 
angles.
NOTE
If any button is not pressed for a few seconds, the 
on-screen display disappears.
HT7\b\f
HLT35W-F2_DZAFLLK_ENG_4969.indd   292011-04-14   �� 12:09:14 
						

							3\fOper\btion
Oper\btion	4
To display the DVD Menu D\fD
When you play a DVD which contains s\Veveral 
menu, you can select the menu you want 
using the Menu.
1. \bress DI\bC MENU.
The disc’s menu appears.
2. Select the menu by using U u I i.
3. \bress B (PLAY), MONO/\bTEREO to confirm.
To display the DVD title D\fD
When you play a DVD which contains s\Veveral 
title, you can select the title you want using the 
Menu.
1. \bress TITLE.
The disc’s title appears.
2. Select the menu by pressing U u I i.
3. \bress B (PLAY), MONO/\bTEREO to confirm.
1.5 times speed playback D\fD
The 1.5 speed allows you to watch the pictures 
and listen to the sound quicker than playing at 
a normal speed.
1. During playback, press B (PLAY), MONO/
\bTEREO to play at 1.5 times spe\Ved. “BX1.5” 
appears on the scr\Veen.
2. \bress B (PLAY), MONO/\bTEREO again to 
exit.
Screen Saver
The screen saver appears when you leave the 
unit in Stop mode for about five minutes.
 
Starting play from selected 
time D\fD Div\b
To start playing at any chosen time on t\Vhe file 
or title.
1. \bress  INFO/DI\bPLAY during playback.
2. \bress U u to select the time clock i\Vcon and
“--:--:--” appears.
3. Input the required start time in hours, 
minutes, and seconds from left to right. If 
you enter the wrong numbers, press CLEAR 
to remove the numbers you entered. Then 
input the correct numbers. 
For example, to find a scene at 1\V hour, 10 
minutes, and 20 seconds, enter “11020” by 
using numerical buttons.
4. \bress  ENTER to confirm. \blayback starts 
from the selected time.
Resume playback 
D\fD Div\b ACD MP3 WMA 
The unit records the point where you pressed 
the x \fSTO\b) depending on the\V disc. 
If “Xx \fResume Stop)” appears on the sc\Vreen 
briefly, press B (PLAY), MONO/\bTEREO to 
resume playback \ffrom the scene point\V). 
If you press x \fSTO\b) twice or unload the\V disc, 
“x”\fComplete Stop) appears on the \Vscreen. 
The unit will clear\V the stopped point. 
NOTE
The resume point may be cleared when a button 
is pressed \ffor example; 
1 (POWER),  
Z OPEN/
CLO\bE, etc).
HLT35W-F2_DZAFLLK_ENG_4969.indd   302011-04-14   �� 12:09:14