LG Flatron W1930s Users Guide

							A10
On Screen Display(OSD) Selection and Adjustment 
NOTEThe order of icons may differ depending on the model (A 10~A 14 ).
The following table indicates all the On  Screen Display control, adjustment,
and setting menus.
Main menu             Sub-menu                   A                         Reference
PRESET
OSD 
POSITION
To adjust the brightness, contrast and 
gamma of the screen 
To costomize the color of the screen
To adjust the position of the screen
To costomize the screen status for a 
users operating environment
To improve the clarity and stability of the screen
SETUP 
TRACKING 
COLOR 
PICTURE 
4: 3 IN WIDE
BRIGHTNESS 
CONTRAST
GAMMA
sRGB
6500K
9300K
RED
GREEN
BLUE
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
LANGUAGE
HORIZONTAL
VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET To adjust the image size
: Adjustable
A : Analog Input
 
						

							
A11
Sub-menus
On Screen Display(OSD) Selection and Adjustment 
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name Icons
Main Menu
Button Tip
MENU        : Exit : Adjust (Decrease/Increase)
SET        : Enter : Select another sub-menu
: Restart to select sub-menu
 
						

							
A12
On Screen Display(OSD) Selection and Adjustment 
Main  men u Su b  men uD escrip tion
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR
PICTURE
COLOR
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
 
						

							
A13
On Screen Display(OSD) Selection and Adjustment 
Main  men u Su b  men uD escrip tion
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
To adjust the clearness of the
screen.
TRACKINGTRACKING
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
 
						

							
A14
Restore all factory default settings except
"LANGUAGE." 
Press the       ,        buttons to reset immediately.
On Screen Display(OSD) Selection and Adjustment 
M ain  men u Su b  men uD escrip tion
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only when
the input signal is an analog signal. 
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATORUse this function to set the power
indicator on the front side of the monitor
to  ON or OFF .
If you set  OFF, it will go off. 
If you set  ONat any time, the power
indicator will automatically be turned on.
SETUP
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menu
 
						

							
A15
Troubleshooting
No image a ppears
Check the following before calling for service.
No i mage a ppears
D o yo u see a "OS D L O CKED " m essa ge on t he s creen?
● Is the power cord of the
display connected?
● Is the power indicator
light on?
● Is the power indicator
flickering?
● Do you see an "OUT OF
RANGE" message on
the screen?
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings, so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the  MENUbutton for several
seconds: the message 
“OSD UNLOCKED” will appear.
●Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							
A20A16
Troubleshooting
Display i mage is in co rr ect
● Display Position is
incorrect.
● On the screen
background, vertical
bars or stripes are
visible.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the  H position and V position icon
in the on screen display.
• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the  CLOCKicon in
the on screen display.
• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the  PHASEicon in the on 
screen display.
• Check  Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check  Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommen\
d
resolution .
If the recommended resolution (optimal resolution) is not selected, le\
tters may
be blurred and the screen may be dimmed, truncated or biased. Make sure \
to
select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), \
 and resolution mentioned above may not be supported by the video card   \
 
performance. In this case, please ask to the computer or the video card \
 
manufacturer
. 
 
						

							A17
Troubleshooting
Do yo u see  an  " U nre co gni zed m onito r,  Plug&P lay (VE SA
DDC) m onitor fo und" m essa ge?
●Have you installed the
display driver?• Be sure to install the display driver from the display 
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.
D isplay  im age is  in co rr ect
● The screen color is
mono or abnormal.
● The screen blinks. • Check if the signal cable is properly connected 
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at 
Control Panel - Settings .
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
 
						

							A18
Specifications
NOTEInformation in this document is subject to change without notice.
Display 
Sync Input 
Video Input 
Resolution
Plug&Play
Power 
Consumption
Dimensions & Weight
Tilt Range Power Input 
AC-DC Adapter
Environmental 
Conditions 
Power cord 18.5 inches (46.8 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating 
Visible diagonal size: 46.8 cm
0.300*0.300 mm pixel pitch
Horizontal Freq. 30 - 61 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector 
Input Form RGB Analog (0.7 Vp-p/ 75 ohm) 
Max VESA 1360 x 768 @ 60 Hz 
Recommend VESA 1360 x 768 @60 Hz 
DDC 2AB 
On Mode : 22W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
Width 45.11 cm / 17.76 inches 
Height 29.66 cm / 11.68 inches Depth 5.13 cm /   2.02 inches
Net 2.3 kg (5.11 lbs) 
Tilt 10 ˚~ 30 ˚
12V        2.0A  
Type ADS-24S-12 1224G*,manufactured by HONOR Electronic
or type MU24-B120200-xx,manufactured by LEADER Electronics
or type LCAP07F,manufactured by Lien Chang 
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Wall-outlet type
or type ADS-24NP-12-1 12024G,manufactured by HONOR Electronic 
W1930S
 
						

							
A19
Specifications
NOTEInformation in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power Consumption
Dimensions & Weight
Tilt Range Power Input
AC-DC Adapter
Environmental
Conditions
Power cord 21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating 
Visible diagonal size: 54.6 cm
0.300*0.300 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On Green) 
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1920 x 1080 @ 60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2AB
On Mode : 25W(Typ.)
Sleep Mode ≤1 W
Off Mode ≤1 W
Width 52.12 cm / 20.52 inches
Height 33.90 cm / 13.35 inches Depth 5.23 cm /   2.06 inches
Net 2.8 kg (6.22 lbs)
Tilt 10 ˚~ 30 ˚
12V        2.0A 
Type ADS-24S-12 1224G*,manufactured by HONOR Electronic
or type MU24-B120200-xx,manufactured by LEADER Electronics
or type LCAP07F,manufactured by Lien Chang
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
Wall-outlet type
or type ADS-24NP-12-1 12024G,manufactured by HONOR Electronic 
W2230S