LG Flatron W1930s Users Guide

							
Make sure to read the Important Precautions before using the product.  
Keep the Users Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
W1930S
W2230S
User’s Guide
 
						

							
A1
This unit has been engineered and manufactured to ensure your personal s\
afety,
however improper use may result in potential electrical  shock or fire h\
azards. In
order to allow the proper operation of all safeguards incorporated in th\
is display,
observe the following basic rules for its installation, use, and servici\
ng.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being
provided by the supplier. If the power cable is faulty in any way, pleas\
e contact the
manufacturer or the nearest authorized repair service provider for a rep\
lacement.
The power supply cord is used as the main disconnection device. Ensure t\
hat the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specificat\
ions of
this manual or listed on the display. If you are not sure what type of p\
ower supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed p\
ower
cords and broken plugs. They may result in a shock or fire hazard. Call \
your service
technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disco\
nnected from
the AC power source even if the unit is turned off.
Do not Open the Display:There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw an\
y toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.\
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short \
period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabine\
t
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time\
, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and\
 signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							
A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release
of heat generated during operation. If these openings are blocked, built\
-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is p\
rovided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this ma\
y scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may\
 cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. \
If possible, use the recommended resolution to obtain the best image qua\
lity for
your LCD display. If used under any mode except the recommended resoluti\
on,
some scaled or processed images may appear on the screen. However, this \
is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to \
the
screen and cause image burn-in. Make sure to use a screen saver on the p\
roduct. 
Burn-in and related problems are not covered by the warranty on this pro\
duct. 
Do not shock or scratch the front and sides of the screen with metallic \
objects. 
Otherwise, it may cause damage to the screen. 
Make sure the panel faces forward and hold it with both hands to move. I\
f you 
drop the product, the damaged product can cause electric shock or fire. \
Contact 
an authorized the service center for repair. 
Avoid high temperatures and humidity. 
 
						

							
Important Precautions
A3
On Cleanin g
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a\
 soft cloth to prevent scratching. Do not clean with a wet cloth or spray wate\
r or
other liquids directly onto the product. An electric shock may occur. (\
Do not use
chemicals such as benzene, paint thinners or alcohol) 
Spray water onto a soft cloth 2 to 4 times, and use it to clean the fron\
t frame; wipe in one direction only. Too much moisture may cause staining.
On  Rep ack ing
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to anot\
her
location, repack it in its original material.
On  Disposal  (Only , Hg  lamp u sed LCD M onitor)
The fluorescent lamp used in this product contains a small amount of mer\
cury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regula\
tions of
your local authority.
 
						

							
A4
Accessories
15-pin D-Sub Signal Cable
(To set it up, this signal cable may
be attached to  this product before shipping out.)
AC-DC adapter
Users Guide/Cards
Power Cord
NOTEThis accessories may look different from those shown here.User must use shielded signal interface cables (D-sub 15 pin cable) wi\
th ferrite cores to
maintain standard compliance for the product.
(Depending on the country)
Power Cord(Depending on the country)
or
!!! Th
ank fo r sele ctin g LGE pr oduc ts !!! 
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
 
						

							
30
10
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range:  10 ˚~30 ˚ 
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the b a c k w a r d  t i l t   angle of the monitor should exceed 10 degrees.
A6A5
Connecting the Display
 
						

							
A6
Connecting the Display
Or
Using the Computer
1.Make sure to turn off the computer and  product. Connect the cable as be\
low sketch map
form to .
12
2.Press        button on the front switch panel to turn the power on. When monitor power is turned on, the 
Self Image Setting Function is  executed automatically.
NOTE‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the u\
ser
connects the monitor for the first time, this function automatically adj\
usts the display to optimal settings for individual
input signals. 
‘AUTO/SET’ Function?  When you encounter problems such as  blurry screen, blurred letters, screen flicker or tilted
screen while using the device or after changing screen resolution, press\
 the AUTO/SET function button to improve
resolution. 
Power Cord
Varies according to model.
Mac adapter
352&(66,1*6(/)
,0$*($-86 70(17
For Apple Macintosh use, a  separate plug adapter is
needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin  2 row connector.
Signal Cable
Wall-outlet type
Wall-outlet type
A
B
Connect D-sub Cable (PC) Connect D-sub Cable (Mac)
NOTEThis is a simplified representation of the rear view.
This rear view represents a general model; your display may differ
from the view as shown.
 
 
						

							
A7
Control Panel Functions
Front Panel Controls
Function
Control
MENU ButtonUse this button to enter or exit from the On Screen Display.
 
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU button for several
seconds. The message OSD LOCKED  appears.
You can unlock the OSD settings at any time by
pushing the MENU button for several seconds. The
message OSD UNLOCKED  appears.
4:3 in WIDE/
 
						

							A8
Control Panel Functions
FunctionControl
This Indicator lights up as white when the display 
is operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker. 
Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to select an icon in the On Screen 
Display.AUTO/SET 
Button
AUTO IMAGE ADJUSTMENT 
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode). 
The best display mode is: 
W1930S: 1360 x 768 
W2230S: 1920 x 1080
ButtonsUse these buttons to select or adjust functions in the On Screen Display.
(4:3 IN WIDE)
For more information, refer to page A12.Button
ButtonTo select the image size of the screen.
• WIDE: Switch to full screen mode according to input image signal.
• 4 : 3: Change the image signal ratio into 4:3.
WIDE4:3
(    )
 
						

							On Screen Display (OSD) Control Adjustment
Scr een A dju st m ent
Making adjustments to the image size, position and operating parameters \
of 
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the  MENU Button,  then the main menu of the OSD appears.
To access a control, use the       or       Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the     /        Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to  select other sub-menu items.
Push the  MENU Button once to return to the main menu to select another
function. Push the  MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making ima\
ge adjustments.
A9