LG Flatron M2250d Owners Manual

							ENGLISH
31WATCHING TV
Software Update
Software	Update	means	software	can	be	
downloaded	through	the	digital	terrestrial	
broadcasting	system.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
SETUP	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Software Update	and	press	OK.
4	 Select	On	or	Off.
If	you	select	On,	a	user	confirm	message	box	
will	be	displayed	to	notify	that	new	software	is	
found.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
When setting “Software Update”
yyOccasionally,	a	transmission	of	updated	
digital	software	information	will	result	in	the	
following	menu	on	the	Monitor	set	screen.
yySimple	Update:	for	current	update	stream.
yySchedule	Update:	for	scheduled	update	
stream			When	the	Software	Update	menu	
is	"Off",	the		message	to	change	it	to	"On"	
appears.
yyWhen	the	power	is	turned	off,	downloading	
starts.	When	the	power	is	turned	on	while	
updating,	the	progress	status	is	displayed.
yySelect	the	Yes	using	the < >	button	and	you	
will	see	the	following	picture.
yyAfter	the	Software	Update	is	complete,	the	
System	restarts.
YesClose
Software update is available.Would you like to download now?(approximately 30 Min ~ 2 hours)Your  TV  software  is  updated  when  you  turn  off  the  TV using the remote control or local key.Do not unplug!
YesClose
A new software update is available at 00/00/0 00:00.Do you want to update the software when available?
HideStop
Software downloading progress.Ver. 03.01.00       Ver. 03.02.00
65 %
New Software is successfully installed.
yyDuring	Progress	of	a	Software	Update,	
please	note	the	following
	»The	Monitor	Set	must	not	be	switched	off.
	»The	antenna	must	not	be	disconnected.
	»After	Software	Update,	you	can	confirm	the	
updated	software	version	in	Diagnostics	
menu.
	»It	may	take	hours	to	download	the	software,	
so	make	sure	that	the	power	stays	on	during	
the	download.
NOTE
  
						

							ENGLISH
32WATCHING TV
Diagnostics
This	function	enables	you	to	view	information	on	
the	Manufacturer,	Model/Type,	Serial	Number	and
Software	Version.
yyThis	displays	the	information	and	signal	
strength	of	the	tuned	*MUX.
yyThis	displays	the	signal	information	and	
service	name	of	the	selected	*MUX.
yy*MUX:	A 	higher	directory	of	channels	in	
digital	broadcasting	(a	single	MUX	contains	
multiple	channels.)
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons 	to	scroll	to	
SETUP	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Diagnostics	and	press	OK.
4	 Display	Manufacturer,	Model	/	 Type,	Serial	
Number	and	Software	Version.
5	 When	you	are	finished,	press	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
CI [Common interface] 
Information 
This	function	enables	you	to	watch	some	encrypted	
services	(pay	services).	If	you	remove	the	CI	
Module,	you	cannot	watch	pay	services.
When	the	module	is	inserted	into	the	CI	slot,	you	
can	access	the	module	menu.	To	purchase	a	
module	and	smart	card,	contact	your	dealer.	Do	not	
repeatedly	insert	or	remove	a	CI	module
from	the 	Monitor 	set. 	This 	may 	cause 	a 	malfunction.	
When	the	Monitor	set	is	turned	on	after	inserting	a	
CI	Module,	you	may	not	have	any	sound	output.
This	may	be	incompatible	with	the	CI	module	and	
smart	card.
CI	(Common	Interface)	functions	may	not	be	
possible	depending	upon	the	country	broadcasting	
circumstances.
When	using	a	CAM(Conditional	 Access	Module),	
please	make	sure	it	meets	fully	the	requirements	of	
either	DVB	CI	or	CI	plus.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	SETUP	
and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	CI 
Information.	and	press	OK.
4	 Select	the	desired	item:	Module	information,	
smart	card	information,	language,	or	software	
download	etc	and	press	OK.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
yyThis	OSD 	is 	only 	for 	illustration 	and 	the 	menu	
options	and	screen	format	will	vary	according	
to	the	Digital	pay	services	provider.	
yyIt	is	possible	for	you	to	change	CI	(Common	
Interface)	menu	screen	and	service	by	
consulting	your	dealer.
NOTE
  
						

							ENGLISH
33WATCHING TV
Selecting the programme list 
You	can	check	which	programmes	are	stored	in	
the	memory	by	displaying	the	programme	list.
Displaying programme LIST
1	 Press	LIST	to	access	the	Programme	List.
2	 When	you	are	finished,	press	MENU or EXIT.
NOTE
yyYou	may	find	some	blue	programmes.	
These	have	been	set	up	to	be	skipped	by	
auto	programming	or	in	the	programme	
edit	mode.
yySome	programmes	with	the	channel	
number	shown	in	the	programme	
LIST	indicate	there	is	no	station	name	
assigned.
Selecting a programme in the programme list
1	 Press	the	Navigation	buttons 	to	programme.
2	 Switch	to	the	chosen	programme	number	and	
press	OK.
NOTE
yyPress	TV/RAD in Digital TV. (The	mode	
will	be	switched	between	TV,	DTV	and	
Radio	from	the	program	you	are	currently	
watching.)
Paging through a programme list
1	 Press	the	Navigation	buttons 	to	turn	the	pages.
2	 Return	to	normal	TV	viewing	and	Press	LIST.
Favourite programme setup
Selecting favourite programme
Favourite	programme	is	a	convenient	feature	that	
lets	you	quikly	scan	up	to	programmes	of	your	
choice	without	having	to	wait	for	the	 TV	to	scan		
through	all	the	in-between	programmes.
1	 Select	your	desired	programme.
2	 Press	Q.MENU	to	access	the	Favourite	menu.
3	 Press	the	Navigation	buttons to	scroll	to	
Favourite. 
4	 When	you	are	finished,	press	OK or Q.MENU.
NOTE
yyThis	will	automatically	include	the	
selected	programme	into	your	favourite	
programme	list.
Displaying the favourite programme list
1	 Press	FAV	to	access	the	Favourite	Programme	
List.
2	 When	you	are	finished,	press	EXIT.
  
						

							ENGLISH
34WATCHING TV
Using additional options
Adjusting aspect ratio
Resize	the	image	to	view	the	image	at	its	optimal	
size	by	pressing	RATIO(Except	3D	Model) or 
Q.MENU while	you	are	watching	Monitor	set.
yyIf	a	fixed	image	displays	on	the	screen	for	a	
long	period	of	time,	it	will	be	imprinted	and	
become	a	permanent	disfigurement	on	the	
screen.	This 	is 	“image 	burn” 	or 	“burn-in” 	and	
not	covered	by	the	warranty.
yyIf	the	aspect	ratio	is	set	to	4:3	for	a	long	
period	of	time,	image	burn	may	occur	on	
the	letterboxed	area	of	the	screen.
CAUTION
You	can	also	change	the	image	size	by	
accessing	the	quick	menus	or	the	main	menus.
NOTE
-		16:9:	 The	following	selection	will	allow	you	
to	adjust	the	picture	horizontally,	in	linear	
proportion,	to	fill	the	entire	screen(useful	for	
viewing	4:3	formatted	DVDs).	
Just Scan
-		Just Scan:	Following	Selection	will	lead	to	you	
view	the	picture	of	best	quality	without	loss	of	
original	picture	in	high	resolution	image.	
				Note:	If	there	is	noise	in	original	Picture,	 You	
can	see	the	noise	at	the	edge.
-		Original:	When	your	Monitor	set	receives	a	wide	
screen	signal	it	will	automatically	change	to	the	
picture	format	broadcast.
-		Full Wide:	When	Monitor	set	receives	the	wide	
screen	signal,it	will	lead	you	to	adjust	the	picture	
horizontally	or	vertically,	in	a	linear	proportion,to	
fill	the	entire	screen	fully.
Original
Full Wide
  
						

							ENGLISH
35WATCHING TV
-		4:3:	The	following	selection	will	allow	you	to	view	
a	picture	with	an	original	4:3	aspect	ratio,	gray	
bars	will	appear	on	both	the	left	and	right	of	the	
screen.
-		14:9:	You	can	view	a	picture	format	of	14:9	or	
a	general	Monitor	set	programme	in	the	14:9	
mode.	 The	14:9	screen	is	viewed	in	the	same	
way	as	in	4:3,	but	is	magnified	to	the	left	and	
right.
-		Zoom:	The	following	selection	will	allow	you	to	
view	the	picture	without	any	alteration,	while	
filling	the	entire	screen.	However,	the	top	and	
bottom	of	the	picture	will	be	cropped.
yyYou	can	only	select	4:3, 16:9 (Wide), 14:9, 
Zoom/Cinema Zoom	in	Component	mode.
yyYou	can	only	select	4:3, Original, 16:9 
(Wide), 14:9, Zoom/Cinema Zoom	in	HDMI	
mode.
yyYou	can	only	select	4:3, 16:9 (Wide) in 
RGB-PC, HDMI-PC	mode	only.
yyIn	DTV/HDMI/Component	(over	720p)	mode,	
Just Scan	is	available.
yyIn 	Analogue/AV 	mode, 	Full Wide	is 	available.
NOTE
- 		Cinema Zoom:	Choose 	Cinema 	Zoom 	when 	you	
want	to	enlarge	the	picture	in	correct	proportion.
				Note:	When	enlarging	or	reducing	the	picture,	
the	image	may	become	distorted.
yy< or >	button:	 Adjust	enlarge	proportion	of	
Cinema	Zoom.	 The	adjustment	range	is	1	to	
16.
yy or 	button:	Move	the	screen.
  
						

							ENGLISH
36WATCHING TV
NOTE
yyIf	you	want	to	use	HDMI-PC	mode,	you	
must	set	the	input	label	to	PC	mode.
NOTE
Using the input list
Selecting an input source
1	 Press	INPUT	to	access	the	input	source	list.
-	The	connected	device	displays	on	each	input	
source.
2	 Press	the	Navigation	buttons	to	scroll	to	one	of	
the	input	sources	and	press	OK.
Input sourceDescription
Antenna or CableWatch	TV	over	the	air,	cable,	and	digital	cable	broadcast
RGBView	a	PC	display	on	the	screen
AVWatch	the	contents	in	a	VCR	or	other	external	devices
ComponentWatch	the	contents	in	a	DVD	or	other	external	devices,	or	through	a	digital	set-top	box
HDMIWatch	contents	in	a	PC,	DVD	or	Digital	settop	box	other	high	definition	devices
The	connected	input	sources	display	in	black	
and	the	disconnected	input	sources	in	grey.
-	If	you	add	an	input	label	to	each	input	
sources,	you	can	easily	identify	a	device	
connected	to	each	input	source.
Adding an Input label
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons 	to	scroll	to	
OPTION and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Input Label	and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	one	of	
the	input	sources.
5	 Press	the	Navigation	buttons	to	scroll	to	one	of	
the	input	label	and	press	OK.
6	 When	you	are	finished,	press EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
yyIf	you 	select 	"Yes"	the 	size 	and 	image 	quality	
are	optimised	for	your	PC.
yyIf	you	select	"No"	the	size	and	image	quality	
are	optimised	for	the	AV	device (DVD 
player, set-top box, gaming device).
yyIf	you	select	"Do not show message 
again"	this	message	does	not	appear	until	
the	monitor	is	reset.	 You	can	change	the	set	
value	in	Menu ► OPTION ► Input Label.
yyThe	values	set	for	HDMI1/HDMI2	are	saved	
independently.(Only	DM2350D	Model)
yyThe	OSD (On Screen Display)	is	displayed	
on	the	screen	as	shown	below.
	»When	turning	the	product	on	in	HDMI	input.
	»When	switching	to	HDMI	input.
	»When	connecting	an	HDMI	cable	with	no	
signal.
Is the input connected to your PC?
Do not show message again.
YesNo
  
						

							ENGLISH
37WATCHING TV
On-screen menu language / 
Country selection
The	installation	guide	menu	appears	on	the	
Monitor	set	screen	when	it	is	switched	on	for	the	
first	time.
1	 Press	the	Navigation	buttons	to	scroll	to	
Desired Language and	press	OK.
2	 Press	the	Navigation	buttons	to	scroll	to	
Country and	press	OK.
If you want to change Language /
Country selection
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
OPTION and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Menu Language or	Country and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	
Desired Language or	Country option	you	
want	and	press	OK.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
yyWhen	France	is	selected	for	Country,
password	is	not	'0'	,	'0'	,	'0'	,	'0'	but	'1'	,	'2'	,'3'	,	
'4'	.
yyIf	you	do	not	finish	the	set-up Installation 
Guide	by	pressing	BACK	or	if	you	time	
out	on	the	OSD	(On	Screen	Display)	the	
installation	menu	will	continuously	appear	
until	the	set	up	is	completed	whenever	the	
Monitor	set	is	switched	on.
yyIf	you	select	the	wrong	local	country,	teletext	
may	not	appear	correctly	on	the	screen	and	
some	problems	may	occur	during	teletext	
operation.
yyThe	CI	(Common	Interface)	function	may	not	
be	applied	based	on	country	broadcasting	
circumstances.
yyDTV	mode	control	buttons	may	not	
function	based	on	country	broadcasting	
circumstances.
yyIn	country 	that 	Digital 	broadcasting 	regulation	
isn’t	fixed,	some	DTV	function	may	not	
work	depending	on	digital	broadcasting	
circumstances.
yyThe	Country	Setting	"UK"	should	only	be	
activated	in	UK.
yyIf	the	country	setting	is	set	to	"--",	European	
terrestrial/cable	digital	standard	broadcasting	
programmes	are	available,	but	some	DTV	
functions	may	not	work	properly.
NOTE
  
						

							ENGLISH
38WATCHING TV
Language selection (In digital 
mode only)
The	Audio	function	allows	selection	of	a	preferred	
language.
If	audio	data	in	a	selected	language	is	not	
broadcast,	the	default	language	audio	will	be	
played.
Use	the	Subtitle	function	when	two	or	more	subtitle	
languages	are	broadcast.	If	subtitle	data	in	a	
selected	language	is	not	broadcast,	the	default	
language	subtitle	will	be	displayed.
When	the	languages	you	selected	as	the	primary	
for	Audio Language	and	Subtitle Language	
are	not	supported,	you	can	select	language	in	
secondary	category.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons 	to	scroll	to	
OPTION and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Audio Language or	Subtitle Language and	
press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	
Desired Language option	you	want	and	press	
OK.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
Audio Language Selection
When	two	or	more	audio	languages	are	broadcast,
you	can	select	the	audio	language.
1	 Press	Q.MENU	to	access	the	quick	menu.
2	 Press	the 	Navigation 	buttons 	to 	scroll 	to 	Audio.
3	 Press	the	Navigation	buttons 	to	scroll	to	
Audio Language option	you	want	and	press	
OK.
4	 When	you	are	finished,	press 	Q.MENU or 
EXIT.
Audio Language OSD Information
DisplayStatus
Not	Available
MPEG	 Audio
Dolby	Digital	 Audio
Audio	for	“Visual	Impaired”
Audio	for	“Hearing	Impaired”
Dolby	Digital	Plus	 Audio
AAC	Audio
  
						

							ENGLISH
39WATCHING TV
Subtitle Language Selection
When	two	or	more	subtitle	languages	are	
broadcast,	you	can	select	the	subtitle	language	
with	the	SUBTITLE	button	on	the	remote	control.
Press	the	Navigation	buttons	to	select	a	subtitle	
language.
Subtitle Language OSD Information
DisplayStatus
Not	Available
Teletext	Subtitle
Subtitle	for	“Hard	of	Hearing”
yyThe	audio/subtitles	can	be	displayed	in	a	
simpler	form	with	1	to	3	characters	broadcast	
by	the	service	provider.
yyWhen 	you 	select 	supplementary 	Audio 	(Audio	
for	“Visual/Hearing	Impaired”)	the	 TV	may	
output	a	part	of	the	Main	audio.
Using the Lock options
Locking the buttons on the 
Monitor set.
Enter	the	password,	press	‘0’, ‘0’, ‘0’, ‘0’	on	the	
remote	control	handset.
When	France	is	selected	for	Country,	password	is	
not	‘0’, ‘0’, ‘0’, ‘0’	but	‘1’,’2’,’3’,’4’.
Lock	the	buttons	on	the	Monitor	set	to	prevent	any	
unwanted	operations	or	accidents	by	children.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	LOCK 
and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Key Lock	and	press	OK.
4	 Press	the	Navigation	buttons 	to	scroll	to	On	
and	press	OK	to	activate	the	Key	lock	feature.
-	To	deactivate	the	Key	lock	feature,	select	Off.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
yyThe	Monitor	set	is	programmed	to	remember	
the	last	setting	after	you	turn	the	Monitor	set	
off.	
yyIf	you	turn	the	monitor	set	off	while	the	key	
lock	feature	is	activated	and	wish	to	turn	it	
back	on,	press	the		on	the	monitor	set.	
You	can	also	switch	the	device	on	using	the	
remote	control	by	pressing	the	, INPUT ,P  
	or		Number	buttons.	
yyIf	you	press	any	button	on	the	Monitor	set	
with	the	Key	lock	feature	activated,	Key 
Lock On	appears	on	the	screen.
NOTE
  
						

							ENGLISH
40WATCHING TV
Parental control        
(In digital mode only)
This	function	operates	according	to	information	
from	the	broadcasting	station.	Therefore	if	the	
signal	has	incorrect	information,	this	function	does	
not	operate.	
A	password	is	required	to	gain	access	to	this	
menu.
This	set	is	programmed	to	remember	which	option	
it	was	last	set	to	even	if	you	switch	the	set	off.
Prevents	children	from	watching	certain	adult’s	 TV	
programmes,	according	to	the	ratings	limit	set.
Enter	a	password	to	watch	a	blocked	programme.
Using the Quick menu
Customize	the	frequently	using	menus.
1	 Press	Q.MENU	to	access	the	quick	menu.
2	 Press	the	Navigation	buttons	to	scroll	through	
the	following	menus.
MenuDescription
Aspect RatioResizes	an	image.	(16:9,	Just Scan,	Original, Full Wide, 4:3, 14:9, Zoom,	Cinema	Zoom1)
Clear Voice llBy	differentiating	the	human	sound	range	from	others,	it	helps	users	listen	to	human	voices	better.
Picture ModeSelects	one	of	the	preset	image	modes	(Vivid,	Standard,	Cinema,	Sport,	Game)
Sound ModeSelects	one	of	the	sound	modes	(Standard,	Music,	Cinema,	Sport,	Game)
AudioSelects	the	sound	output.
Sleep TimerSets	the	length	of	time	until	the	Monitor	set	to	turns	off
FavouriteSelects	the	favourite	programme.
USB DeviceSelects	“Eject”	in	order	to	ejectUSB	device.
Aspect Ratio
16:9
The	available	menus	and	options	may	differ	
from	the	input	source	that	you	are	using.
NOTE
3	 Press	the	Navigation	buttons	to	scroll	to	an	
option	you	want	and	press	OK.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	LOCK 
and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Parental Guidance and	press	OK.
4	 Press	the	Navigation	buttons	to	scroll	to	
Make	appropriate	adjustments	and	press	OK.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the	previous	menu,	press	
BACK.
(Except	for	France)
(Only	France)Blocking Off                    ꔓ
10 and above11 and above12 and above13 and above14 and above15 and above16 and above17 and above18 and above
Blocking Off : Permits all programmes
10 and above11 and above12 and above13 and above14 and above15 and above16 and above17 and above18 and above
Blocking Off : Permits allprogrammes
Blocking Off                    ꔓ