LG Flatron M2250d Owners Manual
Have a look at the manual LG Flatron M2250d Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 98
ENGLISH
98EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range
is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled. Set ID is indicated as
decimal (1 to 99) on menu and as Hexa decimal (0x0 to 0x63)...](http://img.usermanuals.tech/thumb/47/52108/w64_lg_flatron_m2250d-owner-s-manual-97.png "Page 98
ENGLISH
98EXTERNAL CONTROL DEVICE SETUP
Transmission / Receiving protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range
is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled. Set ID is indicated as
decimal (1 to 99) on menu and as Hexa decimal (0x0 to 0x63)...")
![Page 99
ENGLISH
99EXTERNAL CONTROL DEVICE SETUP
01. Power (Command: k a)To control Power On/Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Data 01: Power On
Acknowledgement[a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
Transmission[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement[a][ ][Set ID][ ][OK/NG][Data][x]
*Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function.*OK Ack., Error Ack. and...](http://img.usermanuals.tech/thumb/47/52108/w64_lg_flatron_m2250d-owner-s-manual-98.png "Page 99
ENGLISH
99EXTERNAL CONTROL DEVICE SETUP
01. Power (Command: k a)To control Power On/Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Data 01: Power On
Acknowledgement[a][ ][Set ID][ ][OK/NG][Data][x]
To show Power On/Off.
Transmission[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement[a][ ][Set ID][ ][OK/NG][Data][x]
*Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function.*OK Ack., Error Ack. and...")
![Page 100
ENGLISH
100EXTERNAL CONTROL DEVICE SETUP
07. Brightness (Command: k h)To adjust screen brightness.You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to ‘Real data mapping ’. See p.102
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)To adjust the screen colour. (Except PC mode)You can also adjust colour in the PICTURE menu.
Transmission[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to...](http://img.usermanuals.tech/thumb/47/52108/w64_lg_flatron_m2250d-owner-s-manual-99.png "Page 100
ENGLISH
100EXTERNAL CONTROL DEVICE SETUP
07. Brightness (Command: k h)To adjust screen brightness.You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to ‘Real data mapping ’. See p.102
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)To adjust the screen colour. (Except PC mode)You can also adjust colour in the PICTURE menu.
Transmission[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to...")
![Page 101
ENGLISH
101EXTERNAL CONTROL DEVICE SETUP
15. Balance (Command: k t)To adjust balance.You can also adjust balance in the AUDIO menu.
Transmission[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to ‘Real data mapping ’. See p.102
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)To adjust colour temperature. You can also adjust Colour.Temperature in the PICTURE menu.
Transmission[x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to ‘Real...](http://img.usermanuals.tech/thumb/47/52108/w64_lg_flatron_m2250d-owner-s-manual-100.png "Page 101
ENGLISH
101EXTERNAL CONTROL DEVICE SETUP
15. Balance (Command: k t)To adjust balance.You can also adjust balance in the AUDIO menu.
Transmission[k][t][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to ‘Real data mapping ’. See p.102
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
16. Colour Temperature (Command: x u)To adjust colour temperature. You can also adjust Colour.Temperature in the PICTURE menu.
Transmission[x][u][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64* Refer to ‘Real...")
![Page 102
ENGLISH
102EXTERNAL CONTROL DEVICE SETUP
20. Programme Add/Skip (Command: m b)To set skip status for the current Programme.
Transmission[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip 01 : Add
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Real data mapping
00 : Step 0Tint :Step 0 : R50A : Step 10 (Set ID 10) : :Step 49 : R1F : Step 15 (Set ID 15)Step 50 : 010 : Step 16 (Set ID 16)Step 51 : G1 : :64 : Step 100Step 100 : G50 :6E : Step 110Balance :73 : Step 115Step 0 :...](http://img.usermanuals.tech/thumb/47/52108/w64_lg_flatron_m2250d-owner-s-manual-101.png "Page 102
ENGLISH
102EXTERNAL CONTROL DEVICE SETUP
20. Programme Add/Skip (Command: m b)To set skip status for the current Programme.
Transmission[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip 01 : Add
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
Real data mapping
00 : Step 0Tint :Step 0 : R50A : Step 10 (Set ID 10) : :Step 49 : R1F : Step 15 (Set ID 15)Step 50 : 010 : Step 16 (Set ID 16)Step 51 : G1 : :64 : Step 100Step 100 : G50 :6E : Step 110Balance :73 : Step 115Step 0 :...")
![Page 103
ENGLISH
103EXTERNAL CONTROL DEVICE SETUP
24. 3D(Command: x t) (only 3D model)To change 3D mode for Monitor set.
Transmission
[x][t][ ][Set ID][ ][Data01][ ][Data02] [ ][Data03][ ]
[Data04][Cr]
Data01 00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D
Data02 00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential
Data03 00 : Right to Left 01 : Left to Right
Data04 3D Depth : Min: 0 to Max: 14
* Refer to ‘Real data mapping ’. See p.102*If data1 is 00(3D On), data4 has no...](http://img.usermanuals.tech/thumb/47/52108/w64_lg_flatron_m2250d-owner-s-manual-102.png "Page 103
ENGLISH
103EXTERNAL CONTROL DEVICE SETUP
24. 3D(Command: x t) (only 3D model)To change 3D mode for Monitor set.
Transmission
[x][t][ ][Set ID][ ][Data01][ ][Data02] [ ][Data03][ ]
[Data04][Cr]
Data01 00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D
Data02 00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential
Data03 00 : Right to Left 01 : Left to Right
Data04 3D Depth : Min: 0 to Max: 14
* Refer to ‘Real data mapping ’. See p.102*If data1 is 00(3D On), data4 has no...")
ENGLISH 101EXTERNAL CONTROL DEVICE SETUP 15. Balance (Command: k t)To adjust balance.You can also adjust balance in the AUDIO menu. Transmission[k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64* Refer to ‘Real data mapping ’. See p.102 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 16. Colour Temperature (Command: x u)To adjust colour temperature. You can also adjust Colour.Temperature in the PICTURE menu. Transmission[x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64* Refer to ‘Real data mapping ’. See p.102 Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 17. Energy Saving (Command: j q)To reduce the power consumption of the Monitor Set. Youcan also adjust Energy Saving in OPTION menu. Transmission[j][q][ ][Set ID][ ][Data][Cr] Power SavingFunctionLevelDescription 765432100000Low Power0000Off0000Low Power0001Minimum0000Low Power0010Medium0000Low Power0011Maximum0000Low Power0101Screen Off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] 18. Auto Configure(Command: j u)To adjust picture position and minimize image shakingautomatically. It works only in RGB (PC) mode. Transmission[j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 19.Tune Command (Command: m a)Select channel to following physical number. Transmission[m][a][ ][Set ID][ ][Data0][ ][Data1][ ] [Data2][Cr] Data00 : High channel dataData01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No. 0 -> Don’t careData02 : 0x00 : Analogue Main0x10 : DTV Main0x20 : RadioChannel data rangeAnalogue - Min: 00 to Max: 63 (0 to 99)Digital - Min: 00 to Max: 3E7 (0 to 999)(Except For Sweden, Finland, Norway, Denmark,Ireland)Digital - Min: 00 to Max: 270F (0 to 9999)(Only Sweden, Finland, Norway, Denmark, Ireland) Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 to Max: 7DH
ENGLISH 102EXTERNAL CONTROL DEVICE SETUP 20. Programme Add/Skip (Command: m b)To set skip status for the current Programme. Transmission[m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] Real data mapping 00 : Step 0Tint :Step 0 : R50A : Step 10 (Set ID 10) : :Step 49 : R1F : Step 15 (Set ID 15)Step 50 : 010 : Step 16 (Set ID 16)Step 51 : G1 : :64 : Step 100Step 100 : G50 :6E : Step 110Balance :73 : Step 115Step 0 : L5074 : Step 116 : :Step 49 : L1CF : Step 199Step 50 : 0 :Step 51 : R1FE : Step 254 :FF : Step 255Step 100 : R50 Colour TemperatureStep 0 : W50 :Step 49 : W1Step 50 : 0Step 51 : C1 : Step 100 : C50 21. Key (Command: m c)To send IR remote key code. Transmission[m][c][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64* Data Key cod -See p.94 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 22. Back Light (Command: m g)To Control the back light. Transmission[m][g][ ][Set ID][ ][Data][Cr] Data : data Min: 00 to Max: 64 Acknowledgement[g][ ][Set ID][ ][OK/NG][Data][x] 23. Input select (Command: x b) (Main Picture Input)To select input source for main picture. Transmission[x][b][ ][Set ID][ ][Data][Cr] Data StructureData 00: DTV 40: Component 10: Analogue 60: RGB 20: AV 90: HDMI Acknowledgement[b][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH 103EXTERNAL CONTROL DEVICE SETUP 24. 3D(Command: x t) (only 3D model)To change 3D mode for Monitor set. Transmission [x][t][ ][Set ID][ ][Data01][ ][Data02] [ ][Data03][ ] [Data04][Cr] Data01 00 : 3D On 01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D Data02 00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential Data03 00 : Right to Left 01 : Left to Right Data04 3D Depth : Min: 0 to Max: 14 * Refer to ‘Real data mapping ’. See p.102*If data1 is 00(3D On), data4 has no meaning.*If data1 is 01(3D Off) or 02(3D to 2D), data2, data3 and data4 have no meaning.*If data1 is 03(2D to 3D), data2 and data3 have no meaning. Data1Data2Data3Data4 00OOX 01XXX 02XXX 03XXO X : don't care Acknowledgement[t][ ][OK][Data01][Data02][Data03][Data04][x] [t][ ][NG][Data01][x] 25. Extended 3D(Command: x v) (only 3D model)To change 3D mode for Monitor set. Transmission[x][v][ ][Set ID][ ][Data01][ ] [Data02][Cr] Data01 : 3D option 00 : 3D Picture Correction 01 : 3D Depth (2D to 3D Only) 02 : 3D Viewpoint Data02 It has own range for each 3D option determined by Data01.1) When Data01 is 0000 : Right to Left01 : Left to Right2) When Data01 is 01Data Min: 0 to Max: 143) When Data01 is 02Data Min: 0 to Max: 14Data Min: 0 to Max: 06 * Refer to ‘Real data mapping ’. See p.102 Acknowledgement[v][ ][OK][Data01][Data02][x][v][ ][NG] [Data01][x]
Mak\b sur\b to r\bad th\b Saf\bty Pr\bcautions b\bfor\b using th\b product. K\b\bp th\b Own\br’s Manual (CD) in an acc\bssibl\b plac\b for futur\b r\bf\br\bnc\b. Th\b mod\bl and s\brial numb\br of th\b SET is locat\bd on th\b back and on\b sid\b of th\b SET. R\bcord it b\blow should you \bv\br n\b\bd s\brvic\b. MO\fEL SERIAL