LG Flatron M2250d Owners Manual

ENGLISH
31WATCHING TV
Software Update
Software	Update	means	software	can	be	
downloaded	through	the	digital	terrestrial	
broadcasting	system.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
SETUP	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Software Update	and	press	OK.
4	 Select	On	or	Off.
If	you	select	On,	a	user	confirm	message	box	
will	be	displayed	to	notify	that	new	software	is	
found.
5	 When	you	are	finished,	press 	EXIT.
When	you	return	to	the...

ENGLISH
32WATCHING TV
Diagnostics
This	function	enables	you	to	view	information	on	
the	Manufacturer,	Model/Type,	Serial	Number	and
Software	Version.
yyThis	displays	the	information	and	signal	
strength	of	the	tuned	*MUX.
yyThis	displays	the	signal	information	and	
service	name	of	the	selected	*MUX.
yy*MUX:	A 	higher	directory	of	channels	in	
digital	broadcasting	(a	single	MUX	contains	
multiple	channels.)
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons 	to	scroll	to	
SETUP	and...

ENGLISH
33WATCHING TV
Selecting the programme list 
You	can	check	which	programmes	are	stored	in	
the	memory	by	displaying	the	programme	list.
Displaying programme LIST
1	 Press	LIST	to	access	the	Programme	List.
2	 When	you	are	finished,	press	MENU or EXIT.
NOTE
yyYou	may	find	some	blue	programmes.	
These	have	been	set	up	to	be	skipped	by	
auto	programming	or	in	the	programme	
edit	mode.
yySome	programmes	with	the	channel	
number	shown	in	the	programme	
LIST	indicate	there	is	no	station	name	
assigned....

ENGLISH
34WATCHING TV
Using additional options
Adjusting aspect ratio
Resize	the	image	to	view	the	image	at	its	optimal	
size	by	pressing	RATIO(Except	3D	Model) or 
Q.MENU while	you	are	watching	Monitor	set.
yyIf	a	fixed	image	displays	on	the	screen	for	a	
long	period	of	time,	it	will	be	imprinted	and	
become	a	permanent	disfigurement	on	the	
screen.	This 	is 	“image 	burn” 	or 	“burn-in” 	and	
not	covered	by	the	warranty.
yyIf	the	aspect	ratio	is	set	to	4:3	for	a	long	
period	of	time,	image	burn	may...

ENGLISH
35WATCHING TV
-		4:3:	The	following	selection	will	allow	you	to	view	
a	picture	with	an	original	4:3	aspect	ratio,	gray	
bars	will	appear	on	both	the	left	and	right	of	the	
screen.
-		14:9:	You	can	view	a	picture	format	of	14:9	or	
a	general	Monitor	set	programme	in	the	14:9	
mode.	 The	14:9	screen	is	viewed	in	the	same	
way	as	in	4:3,	but	is	magnified	to	the	left	and	
right.
-		Zoom:	The	following	selection	will	allow	you	to	
view	the	picture	without	any	alteration,	while	
filling	the	entire...

ENGLISH
36WATCHING TV
NOTE
yyIf	you	want	to	use	HDMI-PC	mode,	you	
must	set	the	input	label	to	PC	mode.
NOTE
Using the input list
Selecting an input source
1	 Press	INPUT	to	access	the	input	source	list.
-	The	connected	device	displays	on	each	input	
source.
2	 Press	the	Navigation	buttons	to	scroll	to	one	of	
the	input	sources	and	press	OK.
Input sourceDescription
Antenna or CableWatch	TV	over	the	air,	cable,	and	digital	cable	broadcast
RGBView	a	PC	display	on	the	screen
AVWatch	the	contents	in	a	VCR	or...

ENGLISH
37WATCHING TV
On-screen menu language / 
Country selection
The	installation	guide	menu	appears	on	the	
Monitor	set	screen	when	it	is	switched	on	for	the	
first	time.
1	 Press	the	Navigation	buttons	to	scroll	to	
Desired Language and	press	OK.
2	 Press	the	Navigation	buttons	to	scroll	to	
Country and	press	OK.
If you want to change Language /
Country selection
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
OPTION and	press	OK.
3	 Press	the	Navigation	buttons...

ENGLISH
38WATCHING TV
Language selection (In digital 
mode only)
The	Audio	function	allows	selection	of	a	preferred	
language.
If	audio	data	in	a	selected	language	is	not	
broadcast,	the	default	language	audio	will	be	
played.
Use	the	Subtitle	function	when	two	or	more	subtitle	
languages	are	broadcast.	If	subtitle	data	in	a	
selected	language	is	not	broadcast,	the	default	
language	subtitle	will	be	displayed.
When	the	languages	you	selected	as	the	primary	
for	Audio Language	and	Subtitle Language	
are...

ENGLISH
39WATCHING TV
Subtitle Language Selection
When	two	or	more	subtitle	languages	are	
broadcast,	you	can	select	the	subtitle	language	
with	the	SUBTITLE	button	on	the	remote	control.
Press	the	Navigation	buttons	to	select	a	subtitle	
language.
Subtitle Language OSD Information
DisplayStatus
Not	Available
Teletext	Subtitle
Subtitle	for	“Hard	of	Hearing”
yyThe	audio/subtitles	can	be	displayed	in	a	
simpler	form	with	1	to	3	characters	broadcast	
by	the	service	provider.
yyWhen 	you 	select...

ENGLISH
40WATCHING TV
Parental control        
(In digital mode only)
This	function	operates	according	to	information	
from	the	broadcasting	station.	Therefore	if	the	
signal	has	incorrect	information,	this	function	does	
not	operate.	
A	password	is	required	to	gain	access	to	this	
menu.
This	set	is	programmed	to	remember	which	option	
it	was	last	set	to	even	if	you	switch	the	set	off.
Prevents	children	from	watching	certain	adult’s	 TV	
programmes,	according	to	the	ratings	limit	set.
Enter	a	password	to...