LG Flatron M2250d Owners Manual

ENGLISH
11ASSEMBLING AND PREPARING
When	you	adjust	the	angle,	do	not	hold	the	
buttom	of	the	Monitor	set	frame	as	shown	on	
the	following	illustration,	as	may	injure	your	
fingers.
WARNING
Mounting on a table
1	 Lift	and	tilt	the	Monitor	set	into	its	upright	
position	on	a	table.
Leave	a	10	cm	(minimum)	space	from	the	wall	
for	proper	ventilation.
3	 Remove	2	screws	and	pull	out	the	Stand Body	
from	the	Monitor	set.
2	 Connect	the	AC-DC Adapter	and	Power Cord	
to	a	wall	outlet.
Disconnect	the 	power...

ENGLISH
12ASSEMBLING AND PREPARING
Using the Kensington security system 
The	Kensington	security	system	connector	is	
located	at	the	back	of	the	Monitor	set.	For	more	
information	of	installation	and	using,	refer	to	the	
manual	supplied	with	the	Kensington	security	
system	or	visit	http://www.kensington.com.
Connect	the	Kensington	security	system	cable	
between	the	Monitor	set	and	a	table.
The	Kensington	security	system	is	optional.	
You	can	obtain	additional	accessories	from	
most	electronics	stores....

ENGLISH
13ASSEMBLING AND PREPARING
Tidying cables
Gather	and	bind	the	cables	with	the	supplied		
cable	tie.
yyDisconnect	the	power	cord	first,	and	then	
move	or	install	the	Monitor	set.	Otherwise	
electric	shock	may	occur.
yyIf	you	install	the	Monitor	set	on	a	ceiling	or	
slanted	wall,	it	may	fall	and	result	in	severe	
injury.	
yyUse	an	authorized	LG	wall	mount	and	
contact	the	local	dealer	or	qualified	
personnel.
yy	Do	not	over	tighten	the	screws	as	this	may	
cause	damage	to	the	Monitor	set	and	void...

ENGLISH
14REMOTE CONTROL
REMOTE CONTROL
The	descriptions	in	this	manual	are	based	on	the	buttons	of	the	remote	control.	
Please	read	this	manual	carefully	and	use	the	Monitor	set	correctly.
To	replace	batteries,	open	the	battery	cover,	replace	batteries	(1.5	V	AAA)	matching	
	and		ends	to	the	label	inside	the	compartment,	and	close	the	battery	cover.
To	remove	the	batteries,	perform	the	installation	actions	in	reverse.
Make	sure	to	point	the	remote	control	to	the	remote	control	sensor	on	the	Monitor...

ENGLISH
15REMOTE CONTROL
P
A
G
E
P
1 23
4 5
06
7 8 9
LISTQ\fVIEW
TV / PC INPUT
TV/
RADENERGY
 SA VING
MARK
3D SETTING
FAV
3D
MUTE
OK
MENUGUIDEQ\fMENU
BA CKINF O
Au\bo Cong \f
EXIT
	(POWER)
Turns	the 	Monitor 	set 	on 	or 	off.
ENERGY SAVING	 (See 	p.60)Adjusts	the	brightness	of	the	screen	to	reduce	energy	consumption.	
TV/PCSelects	 TV	or	PC	mode.
LIST	(See	p.33)Displays	the	programme	table.
INPUT	(See	p.36)Selects	the	input	mode.
TV/RAD	(See	p.30)Selects	Radio,	 TV	and	DTV	programme.	
Number...

ENGLISH
16REMOTE CONTROL
PA
G
EP
1 23
4 5
06
7 8 9
LISTQ\fVIEW
TV / PC INPUT
TV/
RADENERGY
 SA VING
MARK
FAV
RA TIO
MUTE
OK
MENUGUIDEQ.MENU
\fA CKINF O
Aut\b C\bng .
EXIT
INFO ⓘ
Views	the	information	of	the	currently	program	and	the	screen.	
EXITClears	all	on-screen	displays	and	returns	to	Monitor	set	viewing	from	any	menu.	
Coloured buttonsThese	buttons	are	used	for	teletext	(on	 TELETEXTmodels	only)	,	Programme	edit.
SUBTITLERecalls	your 	preferred 	subtitle	in	digital	mode.
Auto Config.Automatically...

ENGLISH
17USING THE MONITOR SET
USING THE MONITOR SET
Connecting to a PC
Your	Monitor	set	supports	the	Plug	&	Play*	feature	
and	has	the	built-in	speakers	with	Surround	X	that	
reproduces	sound	clearly	with	a	rich	bass.	
*	Plug	&	Play:	The	function	when	a	PC	recognizes	
a	connected	device	that	users	connect	to	a	PC	
and	turn	on,	without	device	configuration	or	user	
intervention.
yyIt	is	recommended	to	use	the	Monitor	set	
with	the	HDMI	connection	for	the	best	image	
quality.
yyIf	you	want	to	use	an...

ENGLISH
18USING THE MONITOR SET
yyIf	you	want	to	use	HDMI-PC	mode,	you	must	
set	the	input	label	to	PC	mode.
yyConnect	the	signal	
input	cable	and	tighten	
it	by 	turning 	the 	screws	
clockwise.
NOTE
DVI to HDMI connection
Transmits	the	digital	video	signal	from	your	PC	to
the	Monitor	set.	Connect	the	PC	and	the	Monitor
set	with	the	DVI	to	HDMI	cable	as	shown	the	
following	illustrations.	 To	transmit	an	audio	signal,	
connect	an	optional	audio	cable.
RGB connection
Transmits	the	analog	video	signal...

ENGLISH
19USING THE MONITOR SET
yyIf	you	do	not	use	an	optional	external	
speaker,	connect	the	PC	to	the	Monitor	set	
with	the	optional	audio	cable.
yyIf	you	turn	the	Monitor	set	on	when	the	set	
becomes	cold,	the	screen	may	flicker.	This	is	
normal.
yyUse	a	shielded	signal	interface	cable,	such	
as	D-sub	15	pin	signal	cable	and	DVI	to	
HDMI	cable,	with	a	ferrite	core	to	maintain	
standard		compliance	for	the	product.
yySome	red,	green,	or	blue	spots	may	appear	
on	the	screen.	This	is	normal.
NOTE
yyDo...

ENGLISH
20USING THE MONITOR SET
Customizing PC display options
Customize	options	of	each	image	mode	for	the
best	image	quality.
yyThis	function	works	in	the	following	mode:		
RGB[PC]	mode.
1	 Press	MENU	to	access	the	main	menus.
2	 Press	the	Navigation	buttons	to	scroll	to	
PICTURE	and	press	OK.
3	 Press	the	Navigation	buttons	to	scroll	to	
Screen	and	press	OK.
4	 Select	and	adjust	following	options,	and	then	
press	OK.
OptionDescription
ResolutionMatch	the	resolution	of	RGB	mode.	(Resolution	menu	is...