LG Flatron M197wa Owners Manual

30
TIME ID to adjust the time function 
•In the event of power interruption (disconnection or power failure), the Clockmust be reset.
•Two hours after the set is switched on by the On timefunction it will automatically switch
back to off mode unless a button has been pressed.
•Once the Onor Off timeis set, these functions operate daily at the preset time.
•Off timefunction overrides On timefunction if they are set to the same time.
•The set must be in off mode for the On timeto work.
•On time will move...

31
Use the          buttons to select Onor Off. It can be set up so that it can only be used with
the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child locktab to the On position.
In order to unlock it, do the following :
* Push the MENUbutton on the remote control and set Child lockto the Off position.
Adjusting the Screen
SPECIAL ID to Select the special function
Language
Child lock
DDC-CI
XD Demo
To choose the language in which the...

32
SCREEN  ID to adjust the screen function 
Auto 
config.
Manual
config.
ARC
Reset ResolutionThis button is for the automatic adjustment of the screen Position, Clockand Phase.
(It is not working in DVI.)
This button is for the manual adjustment of the screen Position, Clockand Phase.
• H-Position (It is not working In DVI-PC mode.)To move the displayed image left or right.• V-Position  (It is not working In DVI-PC mode.)To move the displayed image up or down.• Clock (It is not working In DVI-PC...

33
Troubleshooting
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com) 
•  See if the plug&play function is supported by
referring to the video card users guide. Did you install the driver?
Unknown Product message appears when the product is connected.
• Check if the power cord is properly connected to
the outlet.
• See if the power switch is turned on.
•  Adjust brightness and contrast again.
• If the product is in power saving mode,...

34
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screen saver
function.  After-image appears when the
product is turned off.
After-image appears on the product.
Is the screen position wrong?
Do thin lines appear on the
background screen?
Horizontal noise appears or the
characters look blurred.
The screen image looks abnormal.
• Adjust the Position  menu  in OSD .
• See if the video card resolution and frequency
are supported by the product. If the frequency...

35
• Set the colour resolution to more than 24 bits (true
colour)
Select Control Panel – Display – Settings 
– Colour Table menu in Windows.
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
•  Several pixels (red, green, white or black colour)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD. Screen has poor colour resolution (16
colours).
Screen colour is unstable or mono-
colour....

36
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off ModeBlue
Amber
Off
Specifications
The product specifications can change without prior notice for product improvement.
Screen Type18.51 inches Wide (47.01 cm) TFT (Thin Film Transistor) 
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 47.01 cm
Pixel Pitch0.10(H) x 0.30(V) mm
Max. Resolution1366 X 768 @60 Hz 
Recommended Resolution1360 X 768 @60 Hz
Horizontal Frequency30 - 61 kHz
Vertical Frequency56 - 75 Hz
Synchronization TypeSeparate Sync,...