LG Flatron M197wa Owners Manual

							30
TIME ID to adjust the time function 
•In the event of power interruption (disconnection or power failure), the Clockmust be reset.
•Two hours after the set is switched on by the On timefunction it will automatically switch
back to off mode unless a button has been pressed.
•Once the Onor Off timeis set, these functions operate daily at the preset time.
•Off timefunction overrides On timefunction if they are set to the same time.
•The set must be in off mode for the On timeto work.
•On time will move on to auto off  if no activity is received in 2hours after setting the On time.Note
Clock
Off/On time
Auto sleepThis function is used to set up of current time.
You must set the time correctly before using On/Off timefunction.
1) Press the MENUbutton and then use
button to select the TIMEmenu.2) Press the button and then usebutton to select the Clockmenu.
3) Pressbutton and then use         button to set the hour(00~23).
4) Pressbutton and then use         button to set the minutes(00~59).
The default value is -- : --.
5) Press the OK/MENU button to save.
The Off timeautomatically switches the set to off mode at the pre-set time.
1) Press the MENUbutton and then use
button to select the TIMEmenu. 2) Press the button and then usebutton to select Off time or On time.3) Press the button and then usebutton to set the hour(00~23). 4) Press the button and then usebutton to set the minutes(00~59). 5) Press the button and then usebutton to select Onor Off. 6) Only On timefunction; Press the   button and thenbutton to adjust volume level
and programme number. 
7) Press the OK/MENU button to save.
If Auto sleepis active and there is no input signal, the set  switches to off mode
automatically after 10 minutes. ( It is not working in  PC)
1) Press the MENUbutton and then use
button to select the Autosleepmenu. 2) Press the  button and then usebutton to select Onor Off. 3) Press the OK/MENUbutton to save.
Adjusting the Screen
Time
OK   MENU    
Clock
Off time
On time
Auto sleep-- : --
 
						

							31
Use the          buttons to select Onor Off. It can be set up so that it can only be used with
the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Child locktab to the On position.
In order to unlock it, do the following :
* Push the MENUbutton on the remote control and set Child lockto the Off position.
Adjusting the Screen
SPECIAL ID to Select the special function
Language
Child lock
DDC-CI
XD Demo
To choose the language in which the control names are displayed.
Special
OK   MENU    
Language
Child lock
DDC-CI
XD Demo
Use it to see the difference between XD demo on and XD Demo off.
(XD Demo function is not available in RGB PC/ DVI PC mode.)DDC/CI(Display Data Channel Command Interface) is communication protocol for
communications between PC and monitor. 
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the
monitor OSD. 
Monitor can be adjusted with PC by connecting communication between PC and
monitor when DDC/CI is ON, and monitor cannot be adjusted with PC because
communication between PC and monitor is disconnected when DDC/CI is OFF. 
 
						

							32
SCREEN  ID to adjust the screen function 
Auto 
config.
Manual
config.
ARC
Reset ResolutionThis button is for the automatic adjustment of the screen Position, Clockand Phase.
(It is not working in DVI.)
This button is for the manual adjustment of the screen Position, Clockand Phase.
• H-Position (It is not working In DVI-PC mode.)To move the displayed image left or right.• V-Position  (It is not working In DVI-PC mode.)To move the displayed image up or down.• Clock (It is not working In DVI-PC mode.)To minimize any vertical bars or stripes visible on the screen background.
The horizontal screen size will also change.
• Phase (It is not working In DVI-PC mode.)To adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters.
To select the image size of the screen.
• When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2 • When RGB/DVI/HDMI/Component mode: 4:3, 16:9
Use this function to reset the product to the factory default. However, language selection
will not be initialized.(It is working in RGB-PC mode.)
To view the best resolution of RGB-PC mode. Select the same resolution on OSD with
PCs. Its working at RGB-PC mode when vertical frequency is 60Hz.
Adjusting the Screen
Screen
OK   MENU    
Resolution
Auto config.
Manual config.
ARC
Reset1024 x 768
1280 x 768
1360 x 768
1366 x 768
<
 
						

							33
Troubleshooting
• Install the product driver, which is provided with
the product, or download it from the web site.
(http://www.lge.com) 
•  See if the plug&play function is supported by
referring to the video card users guide. Did you install the driver?
Unknown Product message appears when the product is connected.
• Check if the power cord is properly connected to
the outlet.
• See if the power switch is turned on.
•  Adjust brightness and contrast again.
• If the product is in power saving mode, move the
mouse or press any key.
• In DVD Player or Settop Box, check the power
status of connected device.
• The signal from the PC (video card) is out of the
vertical or horizontal frequency range of the
product. Adjust the frequency range by referring to
the Specifications in this users guide.
* Maximum resolution
1366  X 768 @60 Hz 
•  The signal cable between PC and product is not
connected. Check the signal cable.
•  Press the INPUT button in the remote control to
check the input signal. Is the products power cord
connected?
Is the power indicator turning on?
Power is on, power indicator is blue
but the screen appears extremely
dark.
Does the power indicator look amber?
Does the Out of range message
appear?
Does the Check signal cable
message appear?
No image is displayed
Note* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
 
						

							34
• If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screen saver
function.  After-image appears when the
product is turned off.
After-image appears on the product.
Is the screen position wrong?
Do thin lines appear on the
background screen?
Horizontal noise appears or the
characters look blurred.
The screen image looks abnormal.
• Adjust the Position  menu  in OSD .
• See if the video card resolution and frequency
are supported by the product. If the frequency is
out of range, set to the recommended resolution
in the Control Panel – Display – Setting menu.
• Adjust the Clock menu  in OSD.
• Adjust the Phase menu  in OSD.
Troubleshooting
 
						

							35
• Set the colour resolution to more than 24 bits (true
colour)
Select Control Panel – Display – Settings 
– Colour Table menu in Windows.
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
•  Several pixels (red, green, white or black colour)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD. Screen has poor colour resolution (16
colours).
Screen colour is unstable or mono-
colour.
Do black spots appear on the screen?
Screen colour is abnormal.
• Check if the audio cable is connected properly.
• Adjust the volume.
• Check if the sound is set properly.
• Adjust the volume. No sound?
Sound is too low.
The audio function does not work.
• See if you have selected the proper channel
mode.
• Use the automatic channel setup function.
• Check if the TV antenna is properly connected. The TV signal is not being received.
The TV function does not work.
Troubleshooting
 
						

							36
Power Indicator
Mode
Product
On Mode
Sleep Mode
Off ModeBlue
Amber
Off
Specifications
The product specifications can change without prior notice for product improvement.
Screen Type18.51 inches Wide (47.01 cm) TFT (Thin Film Transistor) 
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 47.01 cm
Pixel Pitch0.10(H) x 0.30(V) mm
Max. Resolution1366 X 768 @60 Hz 
Recommended Resolution1360 X 768 @60 Hz
Horizontal Frequency30 - 61 kHz
Vertical Frequency56 - 75 Hz
Synchronization TypeSeparate Sync, Digital
S-Video, Composite video, TV, D-Sub Analog, DVI-D, HDMI, PC Audio In,
Headphone/Earphone, component
Rated Voltage AC 100-240V~ 50/60Hz 0.6A
Power ConsumptionOn Mode       :  35 W (Typ.)
Sleep Mode  ≤1 W
Off Mode       ≤1 W 
Tilt Range-5˚ ~ 15˚
Size (WxLxH)454.7 mm x 193.2 mm x 362.8 mm
Weight (excl. package)3.8 kg (8.38 Ibs)
Operational ConditionTemperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80% 
Storage ConditionTemperature: -10˚C  ~ 60˚C , Humidity: 5% ~ 90% 
LCD Panel
Video Signal
Input Connector
Power
Tilt
Dimension/Weight
Environmental Conditions