LG Flatron M197wa Owners Manual

							Make sure to read the Safety Precautionsbefore using the product. 
Keep the Users Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask for
service.
M197WA
User’s Guide
 
						

							1
Before Connecting to the PC
Stand Installation
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
1
2
3
Carefully place the product screen side
down on a cushioned surface that will
protect product and screen from damage.
Insert the stand baseinto the product
Attach the monitor to the Stand Base
by turning the screw to the right.
* Turn the screw by using the screw
handle
Screw
 
						

							2
Before Connecting to the PC
Detaching Stand 
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
12
3
Place the set screen side down on a
cushion or soft cloth.Detach the monitor to the Stand
Base by turning the screw to the left.
Turn the screw by using the screw handle
4Pull the stand base.
5
 
						

							3
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system,
and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.
Tilt Range                         
Warning:
When adjusting the angle of the screen, do not put
your finger(s) in between the head of the monitor
and the stand body. You can hurt your finger(s).
Locking Device
Use this locking cable (This has to be purchased
separately if required.) to prevent theft.
Theft prevention locking device
-6°~  -2°12°~ 18°
 
						

							4
Before Connecting to the PC
WALL MOUNT:HORIZONTAL INSTALLATION
For proper ventilation,allow a clearance of 4 inches on each side and from the wall. Detailed installation
instructions are available from your dealer,see the optional Tilt Wall Mounting Bracket Installation and
Setup Guide.
4 inches
4 inches
4 inches4 inches4 inches
 
						

							5
Name and Function of the Parts
Name of the Remote Control Buttons 
POWERINPUT
PR
PR
OK
MUTE
LISTQ.VIEW
SSM PSM
VOL
VOL
I/II
TV/PC
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
Inserting batteries into remote control.
AAA Type
TV/PC : Selects TV or PC mode.
Switches the set on.
POWER
INPUT
NOTE : In case of weak
stereo sound signals, with
stereo or Nicam stereo
transmission, select mono
reception.
Each time you press the Input button it will
change to 
TV            AV Component               
RGB          DVI          HDMI
If nothing is inputted for several seconds the
screen will automatically move to the
selected menu. 
Number buttons
Able to directly select and change channel.
MUTESwitches the sound on or off.
PSM (Picture Status Memory) Button
Press repeatedly to select Dynamic, Standard, Mild, Gameor User
picture mode.
SSM (Sound Status Memory) Button
Use this button to select the sound tone. 
Press repeatedly to select Flat, Music, Movie, Sports, Usersound tone.
Input 
TV
AV
Component
RGB
DVI
HDMI
OK
 
						

							6
I/II: Bilingual choice and sound mode selection
[TV]
To switch from Stereoto Monosound in case of stereo transmission,or from Nicam Stereoto Nicam Mono, in case of digital transmission.
to switch from Nicam DualIto Nicam Dual IIor Nicam Dual I+IIin
case of Nicam Dual transmission.
to choose between DualI, Dual IIor Dual I+IIin case of bilingual
transmission : 
Dual I sends the primary broadcast language to the loudspeakers ;
Dual II sends the secondary broadcast language to the loudspeakers ;
Dual I+II sends a separate language to each loudspeakers.
[AV / Component]
In AV/Component mode, you can select output sound for the left and 
right loudspeakers. Repeatedly press the I/IIbutton to 
select the sound output.
L+R : Audio signal from audio L input is sent to left 
loud-speaker and audio signal from audio R input is 
sent to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and right 
loud-speakers.
R+R : Audio signal from audio R input is sent to left and 
right loud-speakers.
POWERINPUT
PR
PR
OK
MUTE
LISTQ.VIEW
SSM PSM
VOL
VOL
I/II
TV/PC
Name and Function of the Parts
Name of the Remote Control Buttons
LIST : Programme list
To display the programme list (0~ 99).
Q.VIEW : QUICK VIEW Button
To display the previously selected TV channel 
Note: TV channels displayed in blue have been setup
to be skipped in the Programme Edit menu.
Programme List
OK   MENU    
0     C     01 5     C     07
1     C     356     C     50
2     C     05 7 C     51
3     C     11 8 C     41
4     C     04 9 C     63
 
						

							7
Name and Function of the Parts
Name of the Remote Control Buttons
PR
PR
OK
MENUSLEEP*
VOL
VOL
ARC/*
PR (          ) Buttons
Able to change channel.
VOL (          ) Buttons 
Able to adjust sound.
OK Button
Use when functional adjustment is completed.
Double press the OK button, then Auto Config.
(Only RGB input)
MENU
Use this button to enter the On Screen Display
menu.
SLEEP : SLEEP Timer
You can set a time period after which the 
TV / AV / RGB / Component / DVI / HDMI
should switch itself to standby.  Press the key
repeatedly to select the number of minutes.
ARC/*
To select the image size of the screen.• When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9,
Zoom1, Zoom2 
• When RGB/DVI/HDMI/Component mode: 4:3, 16:9
1020 30
60
240 180
120
90_ _ _ (off)
PR
PR
OK
MENUSLEEP
UPDATE
SIZE HOLD
INDEX
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
ARC/*
(Depends on the country the remote control can be provided different.)
 
						

							8
HOLD
Press the button to stop the automatically rotating
of the sub pages. Press the button again to
continue the automatic rotating again.
SIZE
Press the button repeatedly to display the upper
part, the lower part and then to return to the
normal page size. 
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
TIME
Press this button to select a sub page number. 
The sub page number is displayed at the 
bottom of the screen. To hold or change the 
sub page, press the RED/GREEN,          or 
NUMBER buttons. Press again to exit this 
function. 
Remote Control - Using the Teletext function
If you dont, the teletext may not appear correctly on the screen.
PR
PR
OK
LIST
MENU
Q.VIEW
SLEEP
UPDATE
SIZE HOLD
INDEX
TEXT
TIME MIX
REVEALMODE
VOL
VOL
MX?i
ARC/*
Name and Function of the Parts
Yellow key 
Favourite Program On : Rotate favourite channel 
Favourite Program Off :  To display the previously   
selected TV channel.
TEXT
To select the teletext on or off. The main index
page or the last selected page appears on the
screen together with an information headline and
an option line at the bottom of the screen.
 
						

							9
REVEAL
Press the button to reveal/conceal the hidden
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
INDEX
To display the main index.
MODE 
The mode will be switched in the Teletext mode.
UPDATE
Press the button to appear the TV programme. 
At the top of screen indicates that you are still in the
teletext mode. Before interrupting teletext, you may
select a page number. When the page has been
found, the information line appears briefly on your
screen. Press the button again to reappear teletext.
Remote Control - Using the Teletext function
Name and Function of the Parts
MENUSLEEP
UPDATE
SIZE HOLD
INDEX
TEXT
TIME MIX
REVEALMODEMX?i
ARC/*