LG Flatron L245wp Users Guide

							Specifications                                                          \
    L245WPM
A30
Display 
Sync Input 
Video Input 
Resolution 
Plug&Play 
Power Consumption 
(without Speaker &
USB) 
Dimensions
&Weight
Tilt/Swivel Range  
Power Input 
Environmental 
Conditions24 inches (61.3 cm) Flat Panel Active matrix-TFT LCD  
Glare coating / Anti-glare coating
24 inches viewable
0.270 mm pixel pitch
Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative Composit TTL, Positive/Negative
SOG (Sync On Green), Digital(HDCP)
Signal Input 15 pin D-Sub Connector HDMI/DVI connector(Digital), Component
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital 
Max Analog : VESA 1920 x 1200 @60Hz Digital : VESA 1920 x 1200 @60Hz
Recommend VESA 1920 x 1200 @60Hz 
DDC 2B 
0n Mode : 85 W(Typ.)
Sleep Mode ≤3 W
Off Mode ≤2 W
With Stand Without Stand
Width
56.00 cm / 22.05 inches 56.00 cm / 22.05 inches
Height44.45 cm / 17.50 inches(Min) 37.20 cm / 14.65 inches
54.45 cm / 21.44 inches(Max)
Depth27.02 cm / 10.64 inches 8.40 cm /   3.31 inches
Net 9.6 kg (21.2 lbs) 
Tilt -5 ˚~20 ˚
Swivel range              350 ˚
Height  range            100 mm / 3.94 inches 
Rotate                        90 ˚clockwise(Landscape -> Portrait)
AC 100-240V~ 50/60Hz 1.2A  
Operating Conditions Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
 
						

							A25
Troubleshooting
No image appears
Check the following befor
No image appears
Is the power cord of the
display connected?
Is the power on and the  power indicator blue or  
green?
Is the power indicator
amber?
Do you see an OUT    OF RANGE message 
on the screen?
Do you see a CHECK  SIGNAL CABLE
message on the     
screen?
Do you see a Controls locked message on the screen?
\245  Check and see if the power cord is connected 
properly to the power outlet.
\245 Adjust the brightness and the contrast.
\245 If the display is in power saving mode, move the
mouse or press any key on the keyboard to
activate the screen.
\245 Turn on the PC.
\245 This message appear when the signal from the PC
(video card) is out of the diplays horizontal or
vertical frequency range. See the Specifications
section of this manual and configure the display
again.
\245 This message appears when the signal cable
between your PC and the display is not connected.
Check the signal cable and try again.
\245  You can secure the current control settings, 
so that they cannot be inadvertently  
changed. You can unlock the OSD controls 
at any time by pushing the  MENU+
bu tton for several seconds: the message 
“Controls unlocked” will appear.Do you see “Controls  
locked” when you  
push MENU button?

Troubleshooting
Have you installed the display driver?
Have you installed the 
display driver?
Do you see an
Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?\245Be sure to install the display driver from the display 
driver CD (or diskette) that comes with your  
display. Or, you can also download the driver from 
our web site: http://www.lge.com.
\245Make sure to check if the video card supports  Plug&Play function.
The audio function does not work.
No sound?
Sound is too low.\245 See if the audio cable is connected properly.
\245 Adjust the volume.
\245 See if the sound is set properly.
\245 Adjust the volume.

Specifications                                                          \
       L245WP
NOTE
Information in this document is subject to change without notice.
Attached (    ), Detached ( O ) 
Wall-outlet type or PC-outlet type 
Standard                     USB 2.0, Self-Power  
Data Rate                Max 480 Mbps
Power Consumption  Max 2.5W x 2Stand Base  
Power cord  
USB

Specifications                                                          \
    L245WPM
Attached (    ), Detached ( O ) 
Wall-outlet type or PC-outlet type 
Standard                     USB 2.0, Self-Power  
Data Rate                Max 480 Mbps
Power Consumption  Max 2.5W x 2 
RMS Audio Output     2W+2W(R+L) 
Input Sensitivity           0.7Wrms
Speaker Impendance 16 ΩStand Base  
Power cord  
USB 
Audio
NOTE
Information in this document is subject to change without notice.

Type A pin               Signal Name                      Wire          \
     Type A pin
1 
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 
18
19 T. M. D. S. Data2+
T. M. D. S. Data2 Shield T. M. D. S. Data2-
T. M. D. S. Data1+
T. M. D. S. Data1 Shield T. M. D. S. Data1-
T. M. D. S. Data0+
T. M. D. S. Data0 Shield T. M. D. S. Data0-
T. M. D. S. Clock+
T. M. D. S. Clock Shield T. M. D. S. Clock- CEC
Reserved(In cable but N.C. on device) SCL
SDA
DDC/CEC Ground  +5V Power
Hot Plug Detect
HDMI Type Pin Assignment
Specifications
No.1
No.2 No.19
No.18
AB
A 
A B
A
A B
A
A B
A C
C
C
C
D
5V C 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 
18
19
USB Connector Pin Assignment
2                1 
3                4
1   2  3   4
UP stream             Down stream 
Series B connector      Series  A connector Female Connector View #1:VCC         #2 : Data -  
#3:Data +      #4 : GND 
T. M. D. S. (Transition Minimized Differential Signaling)
 
						

							Specifications                                                          \
          
A32
On Mode 
Sleep Mode
Off Mode Blue
Amber Off
LED Color
MODE
PC INPUT Preset Modes (Resolution)
Indicator
Display Modes 
(Resolution)Horizontal
Freq. (kHz)Vertical
Freq. (Hz)
1 
2
3
4
5
6
7
8
9
10 640 x 480
640 x 480
720 x 480
720 x 400 800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 768 31.47 
31.47
37.50
31.47
37.88
46.88
49.72
48.36 
60.02
68.68
70.09 
59.94
75
70.08
60.32 75
74.55 60
75.03 
75.06 11 
12
13  
14  
15
16  
*17 1280 x 768
1280 x 1024
1280 x 1024
1600 x 1200
1600 x 1200
1680 x 1050
1920 x 1200 61.80
63.98
79.98
75.00
75.00
65.29
74.0465.96 
60.02
75.02
60
60
60.45
59.95
* Recommend Mode
HDMI  Video INPUT 
Display Modes 
(Resolution)Horizontal
Freq. (kHz)Vertical
Freq. (Hz)
Display Modes 
(Resolution)Horizontal
Freq. (kHz)Vertical
Freq. (Hz)
1 
2
3
4
5
6
7
8
9
10480i 
576i
480p
576p
720p
720p
1080i
1080i
1080p
1080p 15.75
15.62
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
60.00
50.00
60.00
50.00
50.00
60.00
50.00
60.00
50.00
60.00
Display Modes 
(Resolution)Horizontal
Freq. (kHz)Vertical
Freq. (Hz)
1 
2
3
4
5
6
7
8480i 
576i
480p
576p
720p
720p
1080i
1080i 15.75
15.62
31.50
31.25
37.50
45.00
28.12
33.75
60.00
50.00
60.00
50.00
50.00
60.00
50.00
60.00
Component
Video INPUT 
 
						

							A25
Troubleshooting
No image appears
Check the following befor
No image appears
Is the power cord of the
display connected?
Is the power on and the  power indicator blue or  
green?
Is the power indicator
amber?
Do you see an OUT    OF RANGE message 
on the screen?
Do you see a CHECK  SIGNAL CABLE
message on the     
screen?
Do you see a Controls locked message on the screen?
\245  Check and see if the power cord is connected 
properly to the power outlet.
\245 Adjust the brightness and the contrast.
\245 If the display is in power saving mode, move the
mouse or press any key on the keyboard to
activate the screen.
\245 Turn on the PC.
\245 This message appear when the signal from the PC
(video card) is out of the diplays horizontal or
vertical frequency range. See the Specifications
section of this manual and configure the display
again.
\245 This message appears when the signal cable
between your PC and the display is not connected.
Check the signal cable and try again.
\245  You can secure the current control settings, 
so that they cannot be inadvertently  
changed. You can unlock the OSD controls 
at any time by pushing the  MENU+
bu tton for several seconds: the message 
\322 will appear.Do you see \322Controls  
locked\323 when you  
push MENU button?

Troubleshooting
Have you installed the display driver?
Have you installed the 
display driver?
Do you see an
Unrecognized monitor,
Plug&Play \(VESA DDC\)
monitor found
message?\245Be sure to install the display driver from the display 
driver CD (or diskette) that comes with your  
display. Or, you can also download the driver from 
our web site: http://www.lge.com.
\245Make sure to check if the video card supports  Plug&Play function.
The audio function does not work.
No sound?
Sound is too low.\245 See if the audio cable is connected properly.
\245 Adjust the volume.
\245 See if the sound is set properly.
\245 Adjust the volume.

Specifications                                                          \
       L245WP
NOTE
Information in this document is subject to change without notice.
Attached (    ), Detached ( O ) 
Wall-outlet type or PC-outlet type 
Standard                     USB 2.0, Self-Power  
Data Rate                Max 480 Mbps
Power Consumption  Max 2.5W x 2Stand Base  
Power cord  
USB

Specifications                                                          \
    L245WPM
Attached (    ), Detached ( O ) 
Wall-outlet type or PC-outlet type 
Standard                     USB 2.0, Self-Power  
Data Rate                Max 480 Mbps
Power Consumption  Max 2.5W x 2 
RMS Audio Output     2W+2W(R+L) 
Input Sensitivity           0.7Wrms
Speaker Impendance 16 \002Stand Base  
Power cord  
USB 
Audio
NOTE
Information in this document is subject to change without notice.

Type A pin               Signal Name                      Wire          \
     Type A pin
1 
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 
18
19 T. M. D. S. Data2+
T. M. D. S. Data2 Shield T. M. D. S. Data2-
T. M. D. S. Data1+
T. M. D. S. Data1 Shield T. M. D. S. Data1-
T. M. D. S. Data0+
T. M. D. S. Data0 Shield T. M. D. S. Data0-
T. M. D. S. Clock+
T. M. D. S. Clock Shield T. M. D. S. Clock- CEC
Reserved(In cable but N.C. on device) SCL
SDA
DDC/CEC Ground  +5V Power
Hot Plug Detect
HDMI Type Pin Assignment
Specifications
No.1
No.2 No.19
No.18
AB
A 
A B
A
A B
A
A B
A C
C
C
C
D
5V C 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17 
18
19
USB Connector Pin Assignment
2                1 
3                4
1   2  3   4
UP stream             Down stream 
Series B connector      Series  A connector Female Connector View #1:VCC         #2 : Data -  
#3:Data +      #4 : GND 
T. M. D. S. (Transition Minimized Differential Signaling)
 
						

							How to Install the VESA Standard wall mounting
A34
This monitor meets VESA-compliant mounting interface pad 
specifications.
DC-OUT HDMI/DVI COMPONENT
AUDIO
OUT
D -
S U BY PRPB   1                          2
DC-OUT HDMI/DVI COMPONENT
AUDIO
OUT
D -
S U BY PRPB   1                          2
DC-OUT HDMI/DVI COMPONENT
AUDIO
OUT
D -
S U BY PRPB   1                          2
VESA wall mounting 
Connected to another object (stand type and
wall-mounted type. This monitor accepts a
VESA-compliant mounting interface pad.-
This has to be purchased separately if
required.
)
For further information, refer to the VESA Wall
Mounting Instruction Guide.
Kensington Security Slot
Connected to a locking 
cable that can be purchased
separately at most 
computer stores.
1.After moving the product to face 
downward, make sure to place it on a soft
cloth or a cushion to avoid surface
damage.  
2. Separate the head and the stand with the use of a screwdriver.
3.Set up the VESA standard Stand Base.
 
						

							Digitally yours