LG Flatron L245wp Users Guide
Have a look at the manual LG Flatron L245wp Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1069 LG manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
computer
system, and other attached devices is turned off.
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -5˚~20˚ Swivel :350˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
Slightly wipe...](http://img.usermanuals.tech/thumb/47/52098/w64_lg_flatron_l245wp-user-s-guide-5.png "Page 6
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
computer
system, and other attached devices is turned off.
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -5˚~20˚ Swivel :350˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
Slightly wipe...")
![Page 7
A6
Connecting the Display
1.Lift the monitor to its highest height to utilize the Pivot function.
2.Landscape & Portrait : You can rotate the panel 90o clockwise.
Please be cautious and avoid contact between the monitor head and the St\
and
Base when rotating the screen to access the Pivot function. If the monit\
or head
touches the Stand Base, then the Stand Base could crack.
3.For detailed information, please refer to the Pivot Software CD provided\
.
Using the Pivot function
Stand sectionHead...](http://img.usermanuals.tech/thumb/47/52098/w64_lg_flatron_l245wp-user-s-guide-6.png "Page 7
A6
Connecting the Display
1.Lift the monitor to its highest height to utilize the Pivot function.
2.Landscape & Portrait : You can rotate the panel 90o clockwise.
Please be cautious and avoid contact between the monitor head and the St\
and
Base when rotating the screen to access the Pivot function. If the monit\
or head
touches the Stand Base, then the Stand Base could crack.
3.For detailed information, please refer to the Pivot Software CD provided\
.
Using the Pivot function
Stand sectionHead...")
![Page 10
A9
Connecting to External Devices
1.Place the monitor in a convenient, well-ventilated location near your co\
mputer.
To adjust height of your monitor, unlock the stand lock on top of the st\
and.
2.Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3.Connect the power cord into a proper power outlet that is easily access\
ible and close
to the display.
Wall-outlet type
4.Press button on the front switch panel to turn the power on.
5.Press...](http://img.usermanuals.tech/thumb/47/52098/w64_lg_flatron_l245wp-user-s-guide-9.png "Page 10
A9
Connecting to External Devices
1.Place the monitor in a convenient, well-ventilated location near your co\
mputer.
To adjust height of your monitor, unlock the stand lock on top of the st\
and.
2.Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3.Connect the power cord into a proper power outlet that is easily access\
ible and close
to the display.
Wall-outlet type
4.Press button on the front switch panel to turn the power on.
5.Press...")
A10 Connecting to External Devices 1.Connect the Component cables and RCA to Stereo cables properly. Connect the terminals to the sockets of the same color. 2.Connect the power cord. 3. Press theINPUTbutton at the front side of the monitor. INPUTOK/AUTO When connecting with a Component cable When Watching DVD/Video/HDTV When connecting with a Component cable.• Select Component.A DC-OUT HDMI/DVICOMPONENT AU DI O OUT D-SUBYPRPB 1 2PBPBPRPR PBPBPRPR Monitor DVD/VIDEO/HDTVComponent Cable (not included) Speaker PBPR PBPR AUDIO IN RCA-Stereocable (not included) DVD/VIDEO/HDTV INPUT RGB HDMI Component Connecting to External Devices 1. After connecting the cables neatly, arrange the cables to the Cable Holderas shown in the following figure. DC-OUT HDMI/DVICOMPONENT AUDIO OUT D-SUBYPRPB 1 2 Cable Holder * The speakeris only for speaker models - L245WPM AUDIO-OUT To connect HDMI, make sure that the audio cables are plugged in as show in the diagram. *The length of the cable which connects the monitor’s AUDIO-OUT and the speaker’s AUDIO-IN can be too long. It is used to connect the components at the appropriate distance when the AUDIO-IN terminal and the speaker are connected to the PC. To arrange the cables Be cautious to avoid the bumping the speaker against its head when removing a cable.Notice Control Panel Functions This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the OK/AUTObutton before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is - 24 inch monitor : 1920 x 1200@60Hz Use thisbutton to select an icon or adjust the setting in the OSD screen. Button Button Button • (Picture In Picture) ButtonThe size of the sub-screen can be changed to fit your needs Button is pressed. •Use this button to directly control brightness and contrast of the PC signal (RGB, HDMI/DVI). Main screen Sub screen OK/AUTO Button Auto in progress For optimal display change resolution to 1920x1200 On Screen Display(OSD) Selection and Adjustment OSD (On Screen Display) menu Icon Function Description PICTURE Adjusting PIP/DW Mode (Multiple Screen) Functions. Selecting the options. Adjusting Screen Colour. SPECIAL Screen Adjustment. PIP/DW SCREEN NOTEOlay\) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. PIP/DW On Screen Display(OSD) Selection and Adjustment Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Red / Green / BlueSet your own colour levels. CSM EZ Video User PConly EZ Video User Contrast 50 Brightness 50 Red 50 Green 50 Blue 50 • 6500K/9300K/sRGB Selecting a factory setting colour set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. sRGB : Set the screen color to fit the SRGB standard color • User: Select this option to use the user-defined settings.CSM Adjusting Screen Colour
Connecting to External Devices A11 1.Connect the HDMI/DVI cables and RCA to Stereo cables properly. When connecting with a HDMI/DVI cable When Watching DVD/Video/HDTV 2. Press theINPUTbutton at the front side of the monitor. INPUTOK/AUTO L245WPM L245WP When connecting with a HDMI/DVI cable.• Select HDMI.A INPUT RGB HDMI Component HDMI/DVICOMPONENT AUDIO OUT D - S U BYPRPB 1 2 AUDIO IN DC-OUTHDMI/DVICOMPONENT AUDIO OUT D -S U BYPRPB 1 2 DC-OUT DVD/VIDEO/HDTV RCA-Stereocable (not included)HDMI/DVI cableRCA-Stereocable (not included)HDMI/DVI cable DVD/VIDEO/HDTV Speaker(not included)
A12 Connecting to External Devices 1.Connect the upstream port of the display to the downstream port of the USB compliant PC or another hub using the USB cable. (Computer must have a USB port) 2.Connect the USB compliant peripherals to the downstream ports of the display. NOTE To activate the USB hub function, the display must be connected to a USB compliant PC(OS) or another hub with the USB cable(enclosed). When connecting the USB cable, check that the shape of the connector at the cable side matches the shape at the connecting side. Even if the display is in a power saving mode, USB compliant devices will function when they are connected the USB ports(both the upstream and downstream) of the display. USB (Universal Serial Bus) is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer. This will give you greater flexibility in setting up your system. USB allows you to connect a chain of up to 120 devices on a single USB port; and you can “hot” plug (attach them while the computer is running) or unplug them while maintaining the Plug and the Plug auto detection and configuration. This display has an integrated BUS- powered USB hub, allowing up to 2 other USB devices to be attached it. Connecting the USB(Universal Serial Bus) Cable MI/DVICOMPONENT AUDIO OUT D - S U BYPRPB 1 2 USB downstream Port connect the cables from USB compliant peripherals-such as keyboard, mouse, etc USB upstream Port To USB downstream portof the USB compliant PC or another hub cable High Speed Full Speed Low Speed Data Rate 480Mbps 12Mbps 1.5Mbps Power 2.5W 2.5W 2.5W Consumption (Max,each Port) (Max,each Port) (Max,each Port) 3. The monitor’s USB terminal supports USB 2.0 and High Speed cables.
A13 Using the speakers - The feature is only for speaker models - L245WPM Side Jack Rear AUDIO IN Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. Audio Input - To connect your PC, plug the cable into the sound card *Line Out on the PC. - To connect your audio component, plug the cable into the external audio component. - To connect HDMI, plug the cable into the Audio-Out of your monitor. *Line Out Speaker Out On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Scr short example is given below to familiarize you with the use of the contr The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. Pops up the menu screenMove where you want to adjustMove where you want to adjustSelect a menu iconSelect a menu iconAdjust the statusSave adjustmentExit from the menu screen. Press the MENUButton, then the main menu of the OSD appears. To access a control, use the Buttons. When the icon you want becomes highlighted, press the OK/AUTO Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the OK/AUTOButton. Exit the OSD by pressing the MENUButton. On Screen Display(OSD) Selection and Adjustment Adjusting Screen Colour Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Color To adjust the color to desired level. Sharpness To adjust the clearness of the screen. HDMI, Component input TheEZ Videofunction automatically adjusts the screen image quality depending on the AV usage environment.
A10 Connecting to External Devices 1.Connect the Component cables and RCA to Stereo cables properly. Connect the terminals to the sockets of the same color. 2.Connect the power cord. 3. Press theINPUTbutton at the front side of the monitor. INPUTOK/AUTO When connecting with a Component cable When Watching DVD/Video/HDTV When connecting with a Component cable.• Select Component.A DC-OUT HDMI/DVICOMPONENT AU DI O OUT D-SUBYPRPB 1 2PBPBPRPR PBPBPRPR Monitor DVD/VIDEO/HDTVComponent Cable (not included) Speaker PBPR PBPR AUDIO IN RCA-Stereocable (not included) DVD/VIDEO/HDTV INPUT RGB HDMI Component Connecting to External Devices 1. After connecting the cables neatly, arrange the cables to the Cable Holderas shown in the following figure. DC-OUT HDMI/DVICOMPONENT AUDIO OUT D-SUBYPRPB 1 2 Cable Holder * The speakeris only for speaker models - L245WPM AUDIO-OUT To connect HDMI, make sure that the audio cables are plugged in as show in the diagram. *The length of the cable which connects the monitor’s AUDIO-OUT and the speaker’s AUDIO-IN can be too long. It is used to connect the components at the appropriate distance when the AUDIO-IN terminal and the speaker are connected to the PC. To arrange the cables Be cautious to avoid the bumping the speaker against its head when removing a cable.Notice Control Panel Functions This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the OK/AUTObutton before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is - 24 inch monitor : 1920 x 1200@60Hz Use thisbutton to select an icon or adjust the setting in the OSD screen. Button Button Button • (Picture In Picture) ButtonThe size of the sub-screen can be changed to fit your needs Button is pressed. •Use this button to directly control brightness and contrast of the PC signal (RGB, HDMI/DVI). Main screen Sub screen OK/AUTO Button Auto in progress For optimal display change resolution to 1920x1200 On Screen Display(OSD) Selection and Adjustment OSD (On Screen Display) menu Icon Function Description PICTURE Adjusting PIP/DW Mode (Multiple Screen) Functions. Selecting the options. Adjusting Screen Colour. SPECIAL Screen Adjustment. PIP/DW SCREEN NOTEOlay\) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. PIP/DW On Screen Display(OSD) Selection and Adjustment Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Red / Green / BlueSet your own colour levels. CSM EZ Video User PConly EZ Video User Contrast 50 Brightness 50 Red 50 Green 50 Blue 50 • 6500K/9300K/sRGB Selecting a factory setting colour set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. sRGB : Set the screen color to fit the SRGB standard color • User: Select this option to use the user-defined settings.CSM Adjusting Screen Colour
Control Panel Functions Front Panel Controls INPUT ButtonSelect the input signal. : 15-pin D-SUB analogue signal : DTV SET-TOP BOX,Video,DVD : HDMI/DVI digital signal DTV SET-TOP BOX,Video,DVD RGB Component HDMI/DVI A15 MENU ButtonUse this button to enter or exit the On Screen Display. Controls locked/Controls unlocked This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU+ Buttonfor several seconds. The message Controls lockedshould appear. You can unlock the OSD controls at any time by pushing the MENU+ Buttonfor several seconds. The message Controls unlockedshould appear. Controls locked Controls unlocked INPUTOK/AUTO INPUT RGB HDMI Component
A10 Connecting to External Devices 1.Connect the Component cables and RCA to Stereo cables properly. Connect the terminals to the sockets of the same color. 2.Connect the power cord. 3. Press theINPUTbutton at the front side of the monitor. INPUTOK/AUTO When connecting with a Component cable When Watching DVD/Video/HDTV When connecting with a Component cable.• Select Component.A DC-OUT HDMI/DVICOMPONENT AU DI O OUT D-SUBYPRPB 1 2PBPBPRPR PBPBPRPR Monitor DVD/VIDEO/HDTVComponent Cable (not included) Speaker PBPR PBPR AUDIO IN RCA-Stereocable (not included) DVD/VIDEO/HDTV INPUT RGB HDMI Component Connecting to External Devices 1. After connecting the cables neatly, arrange the cables to the Cable Holderas shown in the following figure. DC-OUT HDMI/DVICOMPONENT AUDIO OUT D-SUBYPRPB 1 2 Cable Holder * The speakeris only for speaker models - L245WPM AUDIO-OUT To connect HDMI, make sure that the audio cables are plugged in as show in the diagram. *The length of the cable which connects the monitor’s AUDIO-OUT and the speaker’s AUDIO-IN can be too long. It is used to connect the components at the appropriate distance when the AUDIO-IN terminal and the speaker are connected to the PC. To arrange the cables Be cautious to avoid the bumping the speaker against its head when removing a cable.Notice Control Panel Functions This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. Use this button to turn the display on or off. Power Button Power Indicator Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the OK/AUTObutton before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is - 24 inch monitor : 1920 x 1200@60Hz Use thisbutton to select an icon or adjust the setting in the OSD screen. Button Button Button • (Picture In Picture) ButtonThe size of the sub-screen can be changed to fit your needs Button is pressed. •Use this button to directly control brightness and contrast of the PC signal (RGB, HDMI/DVI). Main screen Sub screen OK/AUTO Button Auto in progress For optimal display change resolution to 1920x1200 On Screen Display(OSD) Selection and Adjustment OSD (On Screen Display) menu Icon Function Description PICTURE Adjusting PIP/DW Mode (Multiple Screen) Functions. Selecting the options. Adjusting Screen Colour. SPECIAL Screen Adjustment. PIP/DW SCREEN NOTEOlay\) The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation. PIP/DW On Screen Display(OSD) Selection and Adjustment Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Red / Green / BlueSet your own colour levels. CSM EZ Video User PConly EZ Video User Contrast 50 Brightness 50 Red 50 Green 50 Blue 50 • 6500K/9300K/sRGB Selecting a factory setting colour set. 6500K: Slightly reddish white. 9300K: Slightly bluish white. sRGB : Set the screen color to fit the SRGB standard color • User: Select this option to use the user-defined settings.CSM Adjusting Screen Colour
A13 Using the speakers - The feature is only for speaker models - L245WPM Side Jack Rear AUDIO IN Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. Audio Input - To connect your PC, plug the cable into the sound card *Line Out on the PC. - To connect your audio component, plug the cable into the external audio component. - To connect HDMI, plug the cable into the Audio-Out of your monitor. *Line Out Speaker Out On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. Pops up the menu screenMove where you want to adjustMove where you want to adjustSelect a menu iconSelect a menu iconAdjust the statusSave adjustmentExit from the menu screen. Press the MENUButton, then the main menu of the OSD appears. To access a control, use the Buttons. When the icon you want becomes highlighted, press the OK/AUTO Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the OK/AUTOButton. Exit the OSD by pressing the MENUButton.1 2 3 4 5 6 On Screen Display(OSD) Selection and Adjustment Adjusting Screen Colour Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Color To adjust the color to desired level. Sharpness To adjust the clearness of the screen. HDMI, Component input TheEZ Videofunction automatically adjusts the screen image quality depending on the AV usage environment.
A10 Connecting to External Devices 1.Connect the Component cables and RCA to Stereo cables properly. Connect the terminals to the sockets of the same color. 2.Connect the power cord. 3. Press theINPUTbutton at the front side of the monitor. INPUTOK/AUTO When connecting with a Component cable When Watching DVD/Video/HDTV When connecting with a Component cable.
A13 Using the speakers - The feature is only for speaker models - L245WPM Side Jack Rear AUDIO IN Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. Audio Input - To connect your PC, plug the cable into the sound card *Line Out on the PC. - To connect your audio component, plug the cable into the external audio component. - To connect HDMI, plug the cable into the Audio-Out of your monitor. *Line Out Speaker Out On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Scr short example is given below to familiarize you with the use of the contr The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps: NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. Pops up the menu screenMove where you want to adjustMove where you want to adjustSelect a menu iconSelect a menu iconAdjust the statusSave adjustmentExit from the menu screen. Press the MENUButton, then the main menu of the OSD appears. To access a control, use the Buttons. When the icon you want becomes highlighted, press the OK/AUTO Button. Use the Buttons to adjust the item to the desired level. Accept the changes by pressing the OK/AUTOButton. Exit the OSD by pressing the MENUButton. On Screen Display(OSD) Selection and Adjustment Adjusting Screen Colour Contrast To adjust the contrast of the screen. Brightness To adjust the brightness of the screen. Color To adjust the color to desired level. Sharpness To adjust the clearness of the screen. HDMI, Component input TheEZ Videofunction automatically adjusts the screen image quality depending on the AV usage environment. • Dynamic: Select this option to display with a sharp image. • Standard: The most general and natural screen display status. • Mild: Select this option to display with a mild image. • Game: Select this option to enjoy dynamic image when playing a game. • User: Select this option to use the user-defined settings. Selecting a factory setting colour set. • Warm: Slightly reddish white. • Normal: Slightly bluish white. • Cool: Slightly purplish white. EZ Video ACC NOTEIf the EZ videosetting in the Picture menu is set to Dynamic, Standard, Mild or Game the subsequent menus will be automatically set. HDMI, Component input