LG Flatron L206wu Users Guide

							
A20
Troubleshooting

No image appears
Check the following before calling for service.

No image appears

Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
 Is the power on and the
power indicator blue or
green?
 Is the power indicator
amber?
 Do you see an OUT OF
RANGE message on
the screen?
 Do you see a CHECK
SIGNAL CABLE
message on the
screen?•  Check and see if the power cord is connected
properly to the power outlet.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the  MENUbutton for several
seconds: the message 
“ OSD UNLOCKED ”will appear.
Do you see 
“OSD
LOCKED ” when you
push MENU button?
 
						

							
A21
Troubleshooting

Display image is incorrect
Display Position is
incorrect.
 On the screen
background, vertical
bars or stripes are
visible.
 Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.•  Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the  H position and V position icon
in the on screen display.
•  Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the  CLOCKicon in
the on screen display.
•  Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the  PHASEicon in the on 
screen display.
•  Check  Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check  Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommen\
d
resolution .
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. 
If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), y\
ou might encounter
problems such as blurred letters, blurry screen, cut-off screen display \
or tilted 
screen. 
The setting method can differ by computer and O/S (Operation System), \
 and resolution mentioned above may not be supported by the video card   \
 
performance. In this case, please ask to the computer or the video card \
 
manufacturer
. 
 
						

							
A22
Troubleshooting

Have you installed the display driver?
Have you installed thedisplay driver?
Do you see anUnrecognized monitor,
Plug&Play (VESA DDC)
monitor found
message?
•  Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.

Display image is incorrect
 The screen color is
mono or abnormal.
 The screen blinks. •
 Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at  Control Panel - Settings .
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
 
						

							
A23
Specifications                                                          \
   
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions& Weight
Range
Power Input
Environmental
Conditions20.1 inches (51.113 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
Visible diagonal size : 51.113 cm
0.258*0.258 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate Sync. SOG (Sync On Green) 
Digital (HDCP)
Signal Input 15 pin D-Sub Connector DVI-D Connector (Digital)
USB Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Digital, USB
Max VESA 1680 x 1050 @60 Hz
Recommend VESA 1680 x 1050 @60 Hz
DDC 2B
On Mode :      45 W(Typ.)
Sleep Mode ≤2 W
Off Mode ≤2 W
With Stand Without Stand
Width 47.10 cm / 18.54 inches 47.10 cm / 18.54 inches
Height 42.00 cm / 16.54 inches 31.54 cm / 12.42 inches 
Depth 27.11 cm / 10.67 inches 6.21 cm /   2.44 inches
Net 6 kg (13.23 lbs)
Tilt -3 ˚~17 ˚ (Head)
Height  5.51 inches (140.0 mm)
Swivel   356˚
Rotation 90 ˚ clockwise
AC 100-240V~ 50/60Hz 1.2A 
Operating Conditions
Temperature 10 ˚C to 35  ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions Temperature -20 ˚C to 60  ˚C
Humidity 5 % to 90 % non-Condensing
 
						

							
A24
Specifications                                                          \
  
NOTEInformation in this document is subject to change without notice.
Attached (    ), Detached ( O )
Wall-outlet type or PC-outlet type
Standard                     USB 2.0, Self-Power 
Data Rate                Max 480 Mbps
Power Consumption  Max 2.5W x 2Stand Base 
Power cord 
USB
 
						

							
A25
Specifications
Preset Modes (Resolution)
Analog,Digital supporting modes 
Display Modes (Resolution)Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
*12 720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050 31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
70
60
75
60
75
60
75
75
60
75
60
60
*Recommend Mode
Indicator
On Mode
Sleep Mode
Off Mode blue
amber Off
LED Color
MODE
USB supporting mode 
Display Modes (Resolution)
Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11 640 x 480
720 X 400 800 x 600
832 x 624
1024 x 768
1152 x 864
1152 X 870 1280 x 960
1280 x 1024 1440 x 900
1680 x 1050 31.469
31.468
37.879
49.727
48.363
67.500
63.681
60.000
63.981
55.469
65.29060
70
60
75
60
75
75
60
60
60
60
 
						

							
A26

Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount
plate is purchased.
Kensington Security Slot
Connected to a locking cable that can be
purchased separately at most computer stores.
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.

1. Place the monitor with its front facing downward on a soft cloth.
2.Separate the stand using a screwdriver as shown in the picture.
3.Install the Wall mount plate.
 
						

							
Digitally yours