LG Flatron L206wu Users Guide

							
A10
Use USB programs 

Extend To :  Sets the location to display USB images. 
(1: Standard monitor, 3: USB Monitor) 

 Extend :  Expands the display to a sub screen. 
 Mirror :  Shows the same display as the main screen. 
 Off : Does not to display data to make sure USB   
screen is not displayed. 

Right  Left 
Above Below

5.When using multiple USB monitors, you can set LG USB Easy Connection p\
rogram
separately for each monitor.  
In case of USB dual monitors. 
Select No. 3 USB monitor and use LG USB Easy
Connection features.  
1
2
NOTEIn a monitor to monitor connection, with one USB up to five are possible\
 with direction connection, and up to six are 
possible with parallel connection. 
With the USB cable unconnected, you will not have any trouble using the \
PC. 
Monitor and USB Display connectors support USB 2.0 High Speed.  
Does not support DOS game (StarCraft) and other 3D games.   
For more information on USB, visit the following web site.(http://www.u\
sb.org)
‘LG USB Easy Connection’ program may be changed without notice for\
 the purpose of product improvement. 
 
						

							
A11
You can select the computer that you want to use by
selecting input signal (DVI, D-Sub or USB). 
The default input signal is analogue (D-Sub).
Control Panel Functions

MENU ButtonUse this button to enter or exit the On Screen Display.

OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message  OSD LOCKED should appear.
You can unlock the OSD controls at any time by pushing
the  MENU button for several seconds. The message
OSD UNLOCKED should appear.

Front Panel Controls

6

SOURCE Button
 
						

							
A12
Control Panel Functions
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is
1680 x 1050

-+ ButtonsUse these buttons to select or adjust functions in the On
Screen Display.

For more information, refer to page A19.
 
						

							
A13
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button,  then the main menu of the OSD appears.
To access a control, use the - or +  Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the  - /+  Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to  select other sub-menu items.
Push the  MENU Button once to return to the main menu to select another
function. Push the  MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making ima\
ge adjustments.

AUTO/SET
MENU MENU-+-+
 
						

							
A14
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
NOTEThe order of icons may differ depending on the model (A14~A19).
To adjust the brightness,
contrast and gamma of 
the screenPICTURE
COLOR
POSITION
TRACKING
SETUP 

Main menu Sub-menu A      D    USB                   Reference
PRESET
RED
GREEN
BLUE
To adjust the position 
of the screen To customize the color 
of the screen
To customize the screen
status for a users 
operating environment
To improve the clarity 
and stability of the screen 
BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
WHITE BALANCE
POWER INDICATOR
4:3 IN WIDE
FACTORY RESET
LANGUAGE
OSD         
HORIZONTAL
POSITION  VERTICAL
sRGB
6500K
9300K
: Adjustable
A : Analog Input
D : Digital Input
USB: Digital Input
To select or customize 
desired image settingsFLATRON 
F-ENGINEMOVIE / TEXT
USER
NORMAL
 
						

							
A15
On Screen Display(OSD) Selection and Adjustment 
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip

PICTURE

Sub-menus
MENU        : Exit : Adjust (Decrease/Increase)
SET        : Enter : Select another sub-menu

+-
 
						

							
A16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PICTURE

PICTURE
PRESET
RED
GREEN
BLUESelect the screen color.  •  sRGB: Set the screen color to fit the
SRGB standard color
specification.
•  6500K: Slightly reddish white.
•  9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR

COLOR

MENU : Exit
: Decrease
: Increase
SET     : Select another
sub-menu
-+
MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu-+
 
						

							
A17
On Screen Display(OSD) Selection and Adjustment 
MENU: Exit
: Decrease
: Increase
SET     : Select another sub-menu
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING

TRACKING

-
+

MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION

POSITION

-
+
 
						

							
A18
On Screen Display(OSD) Selection and Adjustment 
Press the           button to reset immediately.
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only when
the input signal is an analog signal. 
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different
the required specifications, the color level
may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
LANGUAGE. 

SETUP

SETUP

Use this function to set the power
indicator on the front side of the monitor
to  ON or OFF .
If you set  OFF, it will go off. 
If you set  ONat any time, the power
indicator will automatically be turned on.

-+

MENU : Exit
: Adjust
: Adjust
SET     : Select another  
sub-menu
-+
4:3 IN WIDETo select the image size of the screen.
Main menu Sub menu Description
WIDE4:3
Resolution        Screen ratio
1280x1024 1152x864
1024x768800x600
640x480
720x480 5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
❈ 4:3 : Depending on the input video signal ratio,   
it is automatically changed to an optimized 
screen ratio. (The 1280X1024 input signal is
changed to 5:4 ratio and 1024X768 to 4:3.)
The input signal which the 4:3 IN WIDE does not
support   4:3 is the following.   
: 720x400,1280x768,1360x768,1680x1050
 
						

							
A19
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the  SET Button

MOVIE
TEXT
NORMAL

USER

When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINE
Screen when applied Screen when not applied
The OSD screen will appear when you touch the                           \
button on the front of
the monitor.
TEXT: For text images (Word processing etc.).
Select the           sub-menu using the  SET button
and save the  YESvalue using the  buttons.
SAVE

MOVIE: For animation images in videos or movies. 
This is under normal operating conditions.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM. 
You can save or restore the adjusted value even 
when using a different environment. 
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance
0

1

2

3

MENU : Exit
,     : Move
SET     : Select
-+
MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu-+