LG Flatron L206wu Users Guide

							
Make sure to read the Important Precautions before using the product. 
Keep the Users Guide(CD) in an accessible place for future reference.\
See the label attached on the product and give the information to your
dealer when you ask for service.
L206WU
User’s Guide
 
						

							
A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being
provided by the supplier. If the power cable is faulty in any way, pleas\
e contact the
manufacturer or the nearest authorized repair service provider for a rep\
lacement.
The power supply cord is used as the main disconnection device. Ensure t\
hat the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specificat\
ions of
this manual or listed on the display. If you are not sure what type of p\
ower supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed p\
ower
cords and broken plugs. They may result in a shock or fire hazard. Call \
your service
technician for replacement.
Do not Open the Display:There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw an\
y toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.\
  
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short \
period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabine\
t
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time\
, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and\
 signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							
A2
Important Precaautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release
of heat generated during operation. If these openings are blocked, built\
-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is p\
rovided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this ma\
y scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may\
 cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. \
If possible, use the recommended resolution to obtain the best image qua\
lity for
your LCD display. If used under any mode except the recommended resoluti\
on,
some scaled or processed images may appear on the screen. However, this \
is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to \
the
screen and cause image burn-in. Make sure to use a screen saver on the p\
roduct. 
Burn-in and related problems are not covered by the warranty on this pro\
duct. 
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the display screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to anot\
her
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mer\
cury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regula\
tions ofyour local authority.
 
						

							
A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand base 
1.Place the monitor with its front facing downward on a cushion or soft cl\
oth.
2.Rotate the Stand Body as shown in figure      .1

3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correc\
t direction.
4.Once assembled take the monitor up carefully and face the front side

Stand BodyStand Base
Warning The tape and locking pin may only be removed from those monitors equippe\
d with a standing base
when the base is pulled up.Otherwise, you may be injured by the protruding sections of the stand.
 
						

							
A4
Connecting the Display
Disassembling the stand
1.Put a cushion or soft cloth on aflat
surface.
3.Pushing Latch inside, Take the stand base from stand body.
2.Place the monitor face Down on
the cushion or soft cloth.
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The pr\
oduct may fall and get
damaged or injure your foot.
 
						

							
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range : -3˚~17˚                                              \
       Swivel  Range : 356˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing position, the forward 
tilt angle of the monitor should not exceed 5 degrees.
You do not need to replace the Locking pin after it is removed, to adjus\
t its height. 
Height Range : maximum 5.51 inch (140.0mm)

* Please be sure to       remove the Locking 
pin to adjust the height.   

140.0mm
 
						

							
A6
Using the Computer
1.Make sure to turn off the computer and  product. Connect signal input cable      and power cable      in order, then tigh\
ten the
screw of the signal cable. 
1
2.Press        button on the front switch panel to turn the power on.
When monitor power is turned on, the Self Image Setting
Function is executed automatically. (Only Analog Mode)

NOTE
‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the u\
ser
connects the monitor for the first time, this function automatically adj\
usts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish t\
o manually run this function once again, push the
‘ AUTO/SET ’ button on the front panel of the monitor. Otherwise, you may execut\
e the ‘ Factory reset’ option on the
OSD adjustment menu. However, be aware that this option initializes all \
the menu items except ‘Language’.

2
Connecting the Display
A
B
C
Connect DVI Cable
Connect D-sub Cable
Connect USB Cable 

A
B

D-SUB                                        DVI-D
AC-IN

C

Wall-outlet type
Power Cord Analog signal
D-sub Digital signal
DVI
DVI-D (This feature is not available in all countries.)
USB
NOTE  This is a simplified representation of the rear view.This rear view represents a general model; your display may differ from \
the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI\
 cable) with ferrite cores to maintain standard
compliance for the product.
 
						

							
A7
Use USB programs 
Connecting the USB(Universal Serial Bus) Cable 

D-SUB                                        DVI-D
AC-IN

One USB Upstream port 

Two USB Downstream ports  
1. Elevate the monitor as far as possible follow 
the arrow to rotate, and plug the USB cable 
into the monitor. 
When connecting multi screens 

2. Tidy the USB cable as in the diagram, press(follow the arrow) the cable holder, 
and open it. 
1. Plug in the USB cable as in the diagram. 
Tidying USB (Universal Serial Bus) Cable 

3. Fit the USB cable into the cable holder as in the diagram. 

Connect to downstream connectors of desktop or
laptop computers, mouse, memory stick or USB 
hard disk.  (However, the computer must support 
USB and have the USB port.) 
 
						

							
A8
Use USB programs 
The display feature can be used by easily connecting the USB cable betwe\
en
laptops/desktops and the USB port at the back of the monitor. 
System Requirements
In order to make full use of USB Display features, your computer must me\
et the following minimum
system requirements: 
1.2 GHz CPU or higher, 512 MB memory or higher (Recommended Specificati\
ons: 1.6 
GHz Core2 Duo CPU, 1 GB memory) 
USB 2.0 Interface Windows 2000 (Service Pack 4), Windows XP (Service Pack 2) Operating\
 Systems (O/S) 
are supported. (But, Windows 98, ME, NT, XP 64-Bit, Vista, Macintosh, L\
inux Operating Systems 
(O/S) are not supported.) 
1.Connect the USB cable as shown in the picture and press the SOURCE but\
ton on the front of the
monitor to select the main display. 
2.“LG USB Easy Connection” driver installation automatically starts.\
  
Before installation, make sure your computer meets the minimum system re\
quirements of Windows
2000 (Service Pack 4) and Windows XP (Service Pack 2) . If your computer fails to meet those
requirements, update the operating systems at http://www.microsoft.com
. 
When the “LG USB Easy Connection” program does not install automat\
ically, please install the driver
manually as shown below.  
Use USB programs 

1
2
3

4
56
If your computer fails to meet the system requirements, the warning mess\
age DisplayLink Core 
Software will be displayed. Press the [OK] button, and continue to inst\
all LG USB Easy Connection 
program. 
3.Install LG USB Easy Connection program as the instruction message says\
, fully remove the USB cable,
and then reboot your computer.  Without rebooting, LG USB Easy Connecti\
on will not operate properly.
For more detailed information on installation and removal, refer to the \
accompanied . 
 
						

							
A9
Use USB programs 

A9

Screen Resolution :  Provides information on the 
resolution that the USB supports.  
 Color Quality :  You can choose 16 
bit or 32 bit colors. 
4.When the installation of LG USB Easy Connection program
is completed, icons as shown in the picture will be created in
the taskbar. With these icons, you can easily use features
such as Screen Resolution, Color Quality, Screen Rotation,
Extend To, Extend and Mirror.

Screen Rotation :  You can set the direction to display USB images. (Pivot function) 
❈   When there is an input USB signal, you can use Pivot programs on GUI.  

1. Lift the monitor to its highest height to utilize the Pivot function.
2. Landscape & Portrait : You can rotate the panel 90o  clockwise. Please be cautious and avoid contact between the monitor 
head and the Stand Base when rotating the screen to access 
the Pivot function. 
If the monitor head touches the Stand Base, then the Stand 
Base could crack.
3. When rotating the monitor, be careful with the connected cables.    

Stand
section
Head
section