LG Flatron L206wu Users Guide

A10
Use USB programs 

Extend To :  Sets the location to display USB images. 
(1: Standard monitor, 3: USB Monitor) 

 Extend :  Expands the display to a sub screen. 
 Mirror :  Shows the same display as the main screen. 
 Off : Does not to display data to make sure USB   
screen is not displayed. 

Right  Left 
Above Below

5.When using multiple USB monitors, you can set LG USB Easy Connection p\
rogram
separately for each monitor.  
In case of USB dual monitors. 
Select No. 3 USB monitor and use...

A11
You can select the computer that you want to use by
selecting input signal (DVI, D-Sub or USB). 
The default input signal is analogue (D-Sub).
Control Panel Functions

MENU ButtonUse this button to enter or exit the On Screen Display.

OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message  OSD LOCKED should appear.
You can unlock the OSD controls at any time by...

A12
Control Panel Functions
This Indicator lights up blue when the display operates
normally(On Mode). If the display is in Sleep Mode
(Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button before entering the On Screen
Display(OSD). This will automatically...

A13
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button,  then the...

A14
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
NOTEThe order of icons may differ depending on the model (A14~A19).
To adjust the brightness,
contrast and gamma of 
the screenPICTURE
COLOR
POSITION
TRACKING
SETUP 

Main menu Sub-menu A      D    USB                   Reference
PRESET
RED
GREEN
BLUE
To adjust the position 
of the screen To customize the color 
of the screen
To customize the screen
status...

A15
On Screen Display(OSD) Selection and Adjustment 
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip

PICTURE

Sub-menus
MENU        : Exit : Adjust (Decrease/Increase)
SET        :...

A16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PICTURE

PICTURE
PRESET
RED
GREEN
BLUESelect the screen color.  •  sRGB: Set the screen color to fit the
SRGB standard color
specification.
•  6500K: Slightly reddish...

A17
On Screen Display(OSD) Selection and Adjustment 
MENU: Exit
: Decrease
: Increase
SET     : Select another sub-menu
Main menu Sub menu Description
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING

TRACKING

-
+

MENU : Exit
:...

A18
On Screen Display(OSD) Selection and Adjustment 
Press the           button to reset immediately.
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only when
the input signal is an analog signal. 
SETUP
To choose the language in which the
control names are displayed.
To adjust position of the OSD window
on the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output...

A19
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the  SET Button

MOVIE
TEXT
NORMAL

USER

When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINE
Screen when applied Screen when not applied
The OSD screen...