LG Flatron L194ws Users Guide

A20
Troubleshooting

Have you installed the display driver?
●Have you installed thedisplay driver?
●Do you see an"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
• Make sure to check if the video card supports
Plug&Play function.

Display image is incorrect
● The screen color is
mono or...

A21
Specifications L194WS  
NOTEInformation in this document is subject to change without notice.

Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base 
Power cord 19 inches (48.2 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
19 inches viewable
0.2835 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On...

A22
SpecificationsL204WS
NOTEInformation in this document is subject to change without notice.

Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Power cord 
20.1 inches (51.1 cm) Flat Panel Active matrix-TFT LCD 
Anti-Glare coating
20.1 inches viewable
0.258 mm pixel pitch
Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative SOG (Sync On...

A23
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
*15 16 640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1152 x 870
1152 x 900
1280 x 1024
1280 x 1024 1440 x 900
1440 x 900
1440 x 900 31.469
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
68.681
61.805
63.981
79.976
55.500
55.935
70.63570
70
60
75
60
75
75
60
75
75
65
60
75
60
60
75
*Recommend Mode
Display...

A24
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1.Put a cushion or soft cloth on a flat surface.
2. Place the monitor face down on
the cushion or soft cloth.     

3.Hold the product as it follows and lift up the Stand slightly.

4.Change your hold on the product as it follows and turn the Stand Base in\
 the arrow
direction.
5.Pull out the Stand to remove.

The Head part
The Stand 
base part
 

A25



Installing the Wall mount plate
Wall mount plate(Separate purchase)
This is stand-type or will mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate is
purchased.
Kensington Security Slot
Connected to a locking 
cable that can be purchased
separately at most 
computer stores
6.Install the Wall mount plate.
 

Digitally yours