LG Flatron L194ws Users Guide

							
Make sure to read the Important Precautions before using the product. 
Keep the User's Guide(CD) in an accessible place for furture reference\
.
See the label attached on the product and give the information to your
dealer when you ask for service.
L194WS
L204WS
User’s Guide
 
						

							
A1
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical  shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another \
power
cord, make sure that it is certified by the applicable national standard\
s if not being
provided by the supplier. If the power cable is faulty in any way, pleas\
e contact the
manufacturer or the nearest authorized repair service provider for a rep\
lacement.
The power supply cord is used as the main disconnection device. Ensure t\
hat the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specificat\
ions of
this manual or listed on the display. If you are not sure what type of p\
ower supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed p\
ower
cords and broken plugs. They may result in a shock or fire hazard. Call \
your service
technician for replacement.
Do not Open the Display.There are no user serviceable components inside. 
There are Dangerous High Voltages inside, even when the power is OFF. 
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw an\
y toys
or objects on the product screen. 
It can cause injury to human, problem to product and damage the display.\
  
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short \
period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the displays cabine\
t
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time\
, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and\
 signal
cable because it can be very dangerous. It can cause electric shock. 
Important Precautions
 
						

							
A2
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do n\
ot place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kit\
chen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow \
the release of
heat generated during operation. If these openings are blocked, built-up\
 heat can
cause failures which may result in a fire hazard. Therefore, NEVER:Block the bottom ventilation slots by placing the display on a bed, sofa\
, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is p\
rovided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Main power breaker is the power cord and this breaking device must be lo\
cated at
a location where it is easy to operate.  
Do not rub or strike the Active Matrix LCD with anything hard as this ma\
y scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may\
 cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance. \
If possible, use the recommended resolution to obtain the best image qua\
lity for
your LCD display. If used under any mode except the recommended resoluti\
on,
some scaled or processed images may appear on the screen. However, this \
is
characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on\
 the display screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to anot\
her
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mer\
cury.
Do not dispose of this product with general household waste.Disposal of this product must be carried out in accordance to the regula\
tions of
your local authority.
 
						

							
A3
Connecting the Display
ImportantThis illustration depicts the general model of connection. Your monitor \
may differ from
the items shown in the picture.
Once you connect the stand base, try not to disconnect it. Do not carry the product upside down holding only the stand base. The pr\
oduct may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off.
Connecting the stand 
1. 
Place the monitor with its front facing downward on a soft cloth.
2.Assemble the Stand Body into the product in the correct direction as sho\
wn in the picture. 
Make sure you push it until you hear it “click”. 
3.Assemble the Stand Base(Front, Rear) into the Stand Body in the correc\
t direction.
4.Once assembled take the monitor up carefully and face the front side

REAR

REARR EA R
REA R
F R O NT
FR O NT

Stand BodyStand Base
Stand Body
 
						

							
A4
Connecting the Display
1.Put a cushion or soft cloth on a flat surface.
To remove the Stand: 

2. Place the monitor face down on
the cushion or soft cloth.     

3.Hold the product as it follows and lift up the Stand slightly.

4.Change your hold on the product as it follows and turn the Stand Base in\
 the arrow
direction.
5.Pull out the Stand to remove.

The Head part
The Stand 
base part
 
						

							
A5
Connecting the Display
To remove the Stand Base: 2.
Hold the body of the Stand as it follows.
Type. A

3.Press inside the two long latches at thesame time with your strength as it follows.
5.The body of the Stand and the Stand Base are successfully separated.

4.Keep pressing the two latches and use the otherhand to hold the body of the Stand to push the
Stand Base in the arrow direction to remove.

1.Ensure there are two short and two long
latches at the bottom of the Stand Base.
 
						

							
A6
Connecting the Display
To remove the Stand Base: 2. 
Hold the body of the Stand as it follows.
Type. B

3.Press inside the four latches individually toward each end.
4.Put the Stand Base on a flat surface and pullup the body of the Stand while holding the
Stand Base with the other hand. to remove.
5.The body of the Stand and the StandBase are successfully separated.

1.Ensure there are four latches at the
bottom of the Stand Base.
 
						

							
A7
Connecting the Display

20

Before setting up the monitor, ensure that the power to the monitor, the\
 computer
system, and other attached devices is turned off. 
Positioning your display
1.Adjust the position of the panel in various ways for maximum comfort.Tilt Range :  -5˚~20˚                            
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable\
 viewing
position, the forward tilt angle of the monitor should not exceed 5 degr\
ees.

When adjusting the angle of the screen, do not
put your finger(s) in between the head of the
monitor and the stand body. You can hurt your
finger(s).Warning:
 
						

							
A8
2
1
Connecting the Display
Using the Computer
1.Place the monitor in a convenient, well-ventilated location near your co\
mputer. 2.Connect the signal cable. When attached, tighten the thumbscrews to secure the 
connection.
3.Connect the power cord into a proper power outlet  that is easily access\
ible and close to
the display.




Wall-outlet type
PC-outlet type
MAC PC
Power Cord
Signal CableAnalog signalD-sub
Varies according to model.
1
2
Mac adapterFor Apple Macintosh use, a  separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin  2 row connector.
NOTE  This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
4.Press        button on the front switch panel to turn the power on.
When monitor power is turned on, the  Self Image Setting
Function is executed automatically.

NOTE‘ Self Image Setting Function’?  This function provides the user with optimal display settings.When the u\
ser
connects the monitor for the first time, this function automatically adj\
usts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish t\
o manually run this function once again, push the
‘AUTO/SET’ button on the front panel of the monitor. Otherwise, yo\
u may execute the ‘ Factory reset’ option on the
OSD adjustment menu. However, be aware that this option initializes all \
the menu items except ‘Language’.
 
						

							
A9
Control Panel Functions
MENU ButtonUse this button to enter or exit the On Screen Display.

Control Function
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message  "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the  MENU button for several seconds. The message
"OSD UNLOCKED" should appear.

ButtonsUse these buttons to select or adjust functions in the On
Screen Display.

For more information, refer to page A17.

Front Panel Controls Back