LG Flatron L194ws Users Guide

							
A10
Control Panel Functions
This Indicator lights up blue when the display
operates normally(On Mode). If the display is in Sleep
Mode (Energy Saving), this indicator color changes 
to amber. Use this button to turn the display on or off.
Power Button
Power Indicator
Use this button to enter a selection in the On Screen 
Display.AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the  AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best display mode is: 
19 inch monitor :  1440 x 900
20.1 inch monitor :  1680 x 1050

Control Function
 
						

							
A11
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters \
of
the display is quick and easy with the On Screen Display Control system. 
A short example is given below to familiarize you with the use of the co\
ntrols.
The following section is an outline of the available adjustments and sel\
ections
you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button , then the main menu of the OSD appears.
To access a control, use the    or Buttons. When the icon you want
becomes highlighted, press the  AUTO/SET Button.
Use the   /      Buttons to adjust the image to the desired level. Use the
AUTO/SET Button  to select other sub-menu items.
Push the  MENU Button once to return to the main menu to select another
function. Push the  MENU Buttontwice to exit from the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making ima\
ge adjustments.
 
						

							
A12
NOTEThe order of icons may differ depending on the model (A12~A17).
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
To adjust the brightness,
contrast and gamma of the
screenPICTURE
COLOR
POSITION
TRACKING
SETUP 

Main menu Sub-menu A                        Reference
PRESET
RED
GREEN
BLUE
To adjust the position of the
screen To customize the color of
the screen
To customize the screen
status for a user's operating
environment
To improve the clarity and
stability of the screen 
BRIGHTNESS
CONTRAST
GAMMA
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHAPNESS
WHITE BALANCE
POWER INDICATOR
ARC
FACTORY RESET
LANGUAGE
OSD         
HORIZONTAL
POSITION  VERTICAL
sRGB
6500K
9300K
: Adjustable
A : Analog Input
To select or customize 
desired image settingsFLATRON 
F-ENGINEMOVIE / TEXT
USER
NORMAL
 
						

							
A13
On Screen Display(OSD) Selection and Adjustment 
NOTEOSD (On Screen Display) menu languages on the monitor may differ from \
the manual.
You were introduced to the procedure of selecting and adjusting an item
using the OSD system.  Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Button Tip

PICTURE

Sub-menus
MENU        : Exit : Adjust (Decrease/Increase)
SET        : Enter : Select another sub-menu
 
						

							
A14
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
BRIGHTNESS
CONTRAST 
GAMMA
To adjust the brightness of the screen. 
To adjust the contrast of the screen.
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
PICTURE

PICTURE
PRESET
RED
GREEN
BLUE• sRGB: Set the screen color to fit the SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
COLOR

COLOR

MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu

MENU : Exit
: Decrease
: Increase
SET     : Select another 
sub-menu
 
						

							
CLOCK
PHASE
SHARPNESS
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To adjust the clearness of the screen.
TRACKING

TRACKING

MENU: Exit
: Decrease
: Increase
SET     : Select another 
sub-menu

A15
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
POSITION

POSITION

MENU : Exit
: Decrease
: Increase
SET     : Select another sub-menu
 
						

							
A16
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
If this does not improve the screen image, restore the factory default s\
ettings. 
If necessary, perform the white balance function again. This function wi\
ll be enabled only when
the input signal is an analog signal. 
SETUPTo choose the language in which the
control names are displayed.
To adjust position of the OSD window on
the screen.LANGUAGE
OSD
POSITION
WHITE
BALANCE
FACTORY
RESET
If the output of the video card is different the
required specifications, the color level may
deteriorate due to video signal distortion.
Using this function, the signal level is
adjusted to fit into the standard output level
of the video card in order to provide the
optimal image.
Activate this function when white and black
colors are present in the screen.   
POWER
INDICATOR
Restore all factory default settings except
"LANGUAGE." 

SETUP

SETUP

Use this function to set the power indicator on
the front side of the monitor to  ONor OFF .
If you set  OFF, it will go off. 
If you set  ONat any time, the power indicator
will automatically be turned on.
Press the       button to reset immediately.

MENU : Exit
: Adjust
: Adjust
SET     :
Select another sub-menu

ARCTo select the image size of the screen.

FULLORIGINAL
Resolution        Screen ratio

1280x1024
1152x864
1024x768800x600
640x480
720x480 5 : 4
4 : 3
4 : 3
4 : 3
4 : 3
3 : 2
* ORIGINAL :Depending on the input video signal ratio,    
it is automatically changed to an optimized screen 
ratio. (The 1280X1024 input signal is changed 
to 5:4 ratio and 1024X768 to 4:3.)
❈ The input signal which the ARC does not support  the  'ORIGINAL'    
is the following.   
-The 19 inch monitor is 720x400,1280x768,1360x768,1440x900-The 20.1 inch monitor is 720x400,1280x768,1360x768,1680x1050
 
						

							
A17
On Screen Display(OSD) Selection and Adjustment 
Icons
Menu Name
Sub-menu Name
Main menu Sub menu Description
To adjust the USER sub-menu function,
Press the  SET Button

MOVIE
TEXT
NORMAL

USER

When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear on the left side, whereas the non-applied
screen will appear on the right side.Touch the SET
button to use the adjusted screen.
FLATRON F-ENGINE
Screen when applied Screen when not applied
The OSD screen will appear when you touch the                           \
  button 
on the   right side of the monitor.
TEXT: For text images (Word processing etc.)
Select the           sub-menu using the  SET button
and save the  YESvalue using the  buttons.
SAVE

MOVIE: For animation images in videos or movies 
This is under normal operating conditions.
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
User
You can manually adjust brightness, ACE or RCM. 
You can save or restore the adjusted value even 
when using a different envir 
...(Brightness): Adjusts screen brightness....ACE(Adaptive Clarity Enhancer): Selects the clarity mode....RCM(Real Color Management): Selects the color mode.
Not applied
Green enhance 
Flesh tone
Color Enhance
0

1

2

3
 
						

							
A18
Troubleshooting

No image appears
Check the following before calling for service.

No image appears

Do you see a OSD LOCKED message on the screen?
●Is the power cord of the
display connected?
● Is the power indicator
light on?
● Is the power on and the
power indicator blue or
green?
● Is the power indicator
amber?
● Do you see an "OUT OF
RANGE" message on
the screen?
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• Adjust the brightness and the contrast.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings, so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the  MENUbutton for several
seconds: the message 
“OSD UNLOCKED” will appear.
●Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							
A19
Troubleshooting

Display image is incorrect
●Display Position is
incorrect.
● On the screen
background, vertical
bars or stripes are
visible.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the  H position and V position icon
in the on screen display.
• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the  CLOCKicon in
the on screen display.
• Press the  AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the  PHASEicon in the on 
screen display.
• Check  Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check  Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommen\
d
resolution .
The setting method can differ by computer and O/S (Operation System), \
and resolution mentioned above may not be supported by the video card   \
 
performance. In this case, please ask to the computer or the video card \
 
manufacturer
.