LG Flatron Ips231p Owners Manual

							20
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
To choose the language in which the
control names are displayed.LANGUAGE
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color level
may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and black
colors are present in the screen.
Restore all factory default settings except
LANGUAGE. 
Press the      ,      buttons to reset
immediately.
FACTORY
RESETPOWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ONor OFF.
If you set OFF, it will go off. 
If you set ONat any time, the power
indicator will automatically be turned on.
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal. 
EXIT: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
ORIGINAL
RATIO SUPER
ENERGY
SAVING 
When SUPER ENERGY SAVING
function is ON , power can be saved
about 25%.
LG accumulate those values using
integrated function with 10 minutes
broadcast video signal.
Sets the screen size.
- WIDE: Fits the screen to the panel  size. 
- ORIGINAL: Adjusts the aspect ratio
automatically depending on input image
signal.
ORIGINALWIDE
* ORIGINAL RATIO is disabled when
the input signal has the recommended
resolution of 1920 x 1080. 
 
						

							21
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Move
Select another sub-menu
Press the MODEButton, then the main menu of the OSD appears.
 
						

							22
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
EXIT: Exit,     : Move
: Select another sub-menu
MOVIE
It is a mode that the screen is adjusted
to the best to view the videos.
TEXT
PHOTO USER
sRGB
It is a mode that the screen is adjusted
to the best for the text works.
It is a mode that the screen is adjusted
to the best to view pictures.It is a mode that the user can adjust
each element. It can adjust the color
mode of the Main Menu.
It is a mode that the screen is adjusted
to the standard sRGB.
 
						

							23
Troubleshooting
No image appears
Check the following before calling for service.
No image appears
Do you see a OSD LOCKED message on the screen?
Is the power cord of the
display connected?
Is the power indicator
light on?
Is the power indicator
flickering?
Do you see an OUT OF
RANGE message on
the screen?
Do you see a CHECK
SIGNAL CABLE
message on the
screen?• Check and see if the power cord is connected
properly to the power outlet.
• Press the Power button.
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
Specifications section of this manual and
configure your display again.
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENUbutton for several
seconds: the message 
“OSD UNLOCKED”will appear. Do you see “OSD
LOCKED” when you
push MENU button?
 
						

							24
Troubleshooting
Display image is incorrect
Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.• Press the AUTObutton to automatically adjust
your display image to the ideal setting. 
If the results are unsatisfactory, adjust the image
position using the H position and V positionicon
in the on screen display.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCKicon in
the on screen display.
• Press the AUTObutton to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the 
horizontal bars using the PHASEicon in the on 
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settingsand see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution. 
The setting method can differ by computer and O/S (Operation System), 
and resolution mentioned above may not be supported by the video card    
performance. In this case, please ask to the computer or the video card  
manufacturer. 
 
						

							25
Display image is incorrect
Troubleshooting
The screen color is
mono or abnormal.
The screen blinks.• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an Unrecognized monitor, Plug&Play (VESA
DDC) monitor found message?
Have you installed the
display driver?• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lg.com.
• Make sure to check if the video card supports
Plug&Play function.
 
						

							26
Specifications       
Display
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
DigitalSync Input
Signal Input 15 pin D-Sub Connector
DVI-D Connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), DigitalVideo Input
Max VESA 1920 x  1080 @ 6 0  H z
Recommend VESA 1920x 1080 @60 HzResolution
Plug&Play
On Mode        :   35W(Typ.)
Sleep Mode    ≤0.3 W
Off Mode        ≤0.3 WPower
Consumption
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-CondensingEnvironment
al Conditions
With Stand
Width    54.82 cm ( 21.58 inch) 
Height 36.67 cm ( 14.43 inch)
(Min.)
47.67 cm ( 18.76 inch)(Max.)
Depth 22.44 cm (   8.83 inch)
Weight(excl. packing) 4.7 kg (10.51 l b )
Dimensions
& Weight
Tilt -5˚ to 15˚
Swivel                356˚
Height              110 mm / 4.33 inchRange
AC 100 - 240 V~  50 / 60 Hz 1.0 A Power Input
Attached (     ), Detached ( O )Stand Base 
Wall-outlet typePower cord 
DDC 2B(Digital),DDC2AB(Anlaog)
Without Stand
Width    54.82 cm ( 21.58 inch) 
Height 33.49 cm ( 13.18 inch)   
Depth 5.63 cm (   2.21 inch)
NOTE
Information in this document is subject to change without notice.
TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel,
Anti-Glare coating
23 inch visible diagonal (58.4 c m )
0.265 x  0.265 mm (Pixel pitch)
 
						

							27
Indicator
On Mode
Sleep Mode
Off Mode
LED Color
MODE
Specifications
Preset Modes (Resolution)
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
*Recommend Mode 1
2
3
4
5
6
7
8
9
10
11
*12720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 108031.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.50070
60
75
60
75
60
75
75
60
75
60
60
Blue
Blue Blinking 
Off
 
						

							28
Installing the Wall mount plate
This monitor satisfies the specifications of the  Wall mount plate or
the interchange device.
1. After moving the product to face
downward, make sure to place it on a
soft cloth or a cushion to avoid surface
damage.  
2. Separate the head and the stand with
the use of a screwdriver.
 
						

							29
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more
details, which is provided when Wall mount plate
is purchased.
Kensington Security Slot
Connected to a locking
cable that can be
purchased separately at
most computer stores.
3.Install the Wall mount plate.
Hole spacing : 75 mm x 75 mm.
NOTE
VESA compatible only with respect to screw mounting interface dimensions and mounting screw     
specifications
Please use VESA standard as below.
* 784.8 mm and under (30.9 inch) 
- Wall Mount Pad Thickness :  2.6 mm
- Screw :   4.0 mm x Pitch 0.7 mm x Length 10 mm    
* 787.4 mm and above (31.0 inch) 
- Please use VESA standard wall mount pad and screws. 
Wall Mount pad
Installing the Wall mount plate