LG Flatron Ips231p Owners Manual

							10
Connecting the Display
NOTE‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals. 
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution. 
A
B
Connect DVI-D(Digital signal) Cable
Connect D-sub(Analog signal) Cable 
1.Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.  
2.Connect signal input cable         and power cord        in order, then tighten the screw
of the signal cable. 
Connecting with the PC 
12
Wall-outlet type
Mac adapter :For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin  2
row connector.
When using a D-Sub signal input cable
connector for Macintosh 
Varies according to model.
DVI-D (This feature is not available in all countries.)
NOTE  This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
3.Press the power button on the front panel to turn the power on. When monitor power is
turned on, the Self Image Setting Functionis executed automatically.
(Only Analog Mode)
Power Button
Connect the signal
input cable and tighten
it up by turning in the
direction of the arrow
as shown in the figure.
CConnect Audio Cable
 
						

							11
Control Panel Functions
Front Panel Controls
MENU ButtonOSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU buttonfor several seconds.
The message OSD LOCKEDshould appear.
You can unlock the OSD controls at any time by pushing
the MENU buttonfor several seconds. The message
OSD UNLOCKEDshould appear.
MODE ButtonFor more information, refer to page 21~22.
 
						

							12
Control Panel Functions
INPUT Button
Use this button to turn the display on or off.Power Button 
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.  (SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button 
AUTO ButtonAUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTObutton before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
IPS231P/IPS231B : 1920 x 1080
Power IndicatorThe power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Power Saving), the power indicator is blinking blue. 
 
						

							13
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system. 
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
To access a control, use the corresponding Buttons.
Use the      /     Buttonsto adjust the image to the desired level. 
Use the       Button to select other sub-menu items.
Press the EXIT Buttonto exit from the OSD. 1
2
3
4
 
						

							14
On Screen Display(OSD) Selection and Adjustment 
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
BRIGHTNESS
CONTRAST
SHARPNESSPICTUREStandard image settings. 
: D-SUB(Analog signal) input 
: DVI-D(Digital signal) input
Main menu Sub-menu            Supported signalsDescription
COLORColor temperature adjustments.COLOR TEMP
SIX COLOR (RED/GREEN/    
BLUE/CYAN/
MAGENTA/
YELLOW)
HUE
SATURATION
RED
GREEN
BLUE WARM
MEDIUM
COOL
(PRESET)      (USER)
LANGUAGE 
POWER INDICATOR
WHITE BALANCE
SUPER ENERGY SAVING
ORIGINAL RATIO
FACTORY RESETTo customize the screen status
for a users operating
environmentOTHERS
HORIZONTAL
VERTICAL
CLOCK
PHASEGAMMA
COLOR RESETDISPLAYTo adjust the position of the
screen  DSUB
DSUB
DSUB
To improve the clarity and
stability of the screen 
VOLUMETo adjust the volume
DSUBDVI-D
DSUBDVI-D
DSUBDVI-D
DSUBDVI-D
DSUBDVI-D
DSUBDVI-D
 
						

							15
bl           ueOn Screen Display(OSD) Selection and Adjustment 
NOTE 
The order of icons may differ depending on the model (14~22).
USER
MOVIE
TEXT
PHOTO
sRGBMODE
It is a mode that the screen is
adjusted to the best to view the
videos.
It is a mode that the screen is
adjusted to the standard sRGB. It is a mode that the screen is
adjusted to the best for the text
works.
It is a mode that the screen is
adjusted to the best to view
pictures.
It is a mode that the user can
adjust each element.  It can adjust
the color mode of the Main Menu.DSUBDVI-D
Main menu Sub-menu            Supported inputDescription
 
						

							16
On Screen Display(OSD) Selection and Adjustment 
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Menu Name
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
Press the MENUButton, then the main menu of the OSD appears.
 
						

							17
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
EXIT: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
BRIGHTNESS
CONTRAST 
SHARPNESSTo adjust the brightness of the screen. 
To adjust the contrast of the screen.
To adjust the clearness of the screen.
 
						

							18
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
COLOR TEMP
PRESET Select either PRESET or USER to adjust
the screen color. 
Select the preset color temperature. 
• WARM: Set the screen to warm color    
temperature . 
• MEDIUM: Set the screen to medium  
color temperature.
• COOL: Set the screen to cool color 
temperature.
USER
GAMMA
COLOR
RESETSIX COLOR
Sets and stores the hue and saturation
for six colors(RED/GREEN/BLUE/CYA
N/
MAGENTA/YELLOW) to satisfy the
color requirements of a user. 
HUEAdjusts the screen hue.
SATURATION
Adjusts the color sharpness on the
screen. Lower values make the color
sharpness weaker and colors lighter
while higher values make the color
sharpness stronger and colors darker.   
REDSet your own red color levels.
GREENSet your own green color levels.
BLUESet your own blue color levels.
Set your own gamma value. :
1.8/2.0/2.2/2.4/2.6
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
Resets the color settings to the 
factorydefault settings for the current input
device. 
PRESET Mode
USER Mode
EXIT: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
 
						

							19
On Screen Display(OSD) Selection and Adjustment 
Main menu Sub menu Description
CLOCK
PHASETo minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display. 
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
HORIZONTAL
VERTICALTo move image left and right.
To move image up and down.
EXIT: Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
To adjust the volume of headphone/Speaker.
EXIT: Exit
: Decrease
: Increase
: Mute
: Restart to select sub-menu