LG Flatron Ips231p Owners Manual
Here you can view all the pages of manual LG Flatron Ips231p Owners Manual. The LG manuals for Monitor are available online for free. You can easily download all the documents as PDF.
Page 1
www.lg.com OWNER’S MANUAL LCD MONITOR LCD MONITOR MODEL Please read this manual carefully before operating your set and retain it for future reference. ENGLISH IPS231P IPS231B
Page 2
1 Safety Precautions Please read these safety precautions carefully before using the product.\ Failure to follow those warnings may result in death, serious injury or\ damage to the product or other property.Warning Electrical Power Related Precautions Use only the power cord supplied with the unit or another manufacturer a\ uthorized cord.- Failure to do so may result in fire or electrical shock or damage to t\ he product. Use only a properly grounded plug and receptacle. - If you do not you may be...
Page 3
2 Safety Precautions Precautions in installing the Product Warning Keep away from heat sources like electrical heaters, curdles or other op\ en flames.- Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-moisture material or vinyl packing out of the reac\ h of children.- Anti-moisture material is harmful if swallowed. If swallowed by mistake,\ force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Kee\ p it out of...
Page 4
Safety Precautions 3 Precautions in Using/Cleaning the Product Warning Do not attempt to disassemble, repair or modify the product yourself.- Fire or electric shock can occur. - Contact the service center for repair. When cleaning the product, unplug the power cord and scrub gently with a\ soft cloth to prevent scratching. Do not clean with a wet cloth. Or spray water or other liqui\ ds directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, pai\ nt thinners or...
Page 5
4 Safety Precautions NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment...
Page 6
5 Accessories !!! Thank for selecting LGE products !!! Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Users Guide/CardsPower Cord 15-pin D-Sub Signal Cable (To set it up, this signal cable may be attached to this product before shipping out.)DVI-D Signal Cable (This feature is not available in all countries.) NOTEThis accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin...
Page 7
6 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Connecting the stand base or Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2.Assemble the Stand Base into the Stand Body. Be sure dont pull out the Stop Pin and make the Stand Base direction as shown. WARNING The tape and locking pin may only be removed from those monitors equipped with a...
Page 8
7 Connecting the Display IMPORTANTThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 3.Use a coin on the back of the stand base and turn the screw clockwise to tighten. 4.Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable youre attaching. 5.When you...
Page 9
8 Connecting the Display Height Range : maximum 4.33 inches (110.0 mm) * Please be sure to remove the Locking pin to adjust the height. 110.0 mm ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. WARNINGYou do not need to replace the Locking pin after it is removed, to adjust its height. When adjusting the angle of the screen, do not put your finger(s) in between the head of...
Page 10
9 Connecting the Display -The pivot function allows you to rotate the screen 90 degrees clockwise. 1.Lift the monitor to its highest height to utilize the Pivot function. 2.Landscape & Portrait : You can rotate the panel 90o clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. 3.Be careful with the cables when rotating the screen....