LG Cf181d Locos Projector User Manual

Function
21
ADV. PICTURE Menu Options
1. Press the A.IRISbutton on the remote control.
2. Press the 
,button to adjust the screen condition as you want.
Auto Iris Function
* This function adjusts the brightness of the entire image depending on inputted image to provide optimum
image quality.
Each press of the, button changes the screen as shown below.
 Manual: You can adjust from 0to 32on Advanced Control of ADV.  PICTURE. You can use this function through the MENUbutton. To exit the menu display,...

Function
22
G GColor Temp: Selects the mood of screen colors.
G
GGamma: Sets the intensity of the picture.
G
GReal Cinema: Set up the picture for the best picture appearance for viewing movies.
G
GBlack Level: Adjusting the contrast and the brightness of the screen using the black level of the screen.
You can also use the C.TEMPbutton on the remote control.
You can also use the GAMMAbutton on the remote control.
You can use it only in Video, S-Video, Component(480i/576i/1080i 50/60Hz, 1080p 24Hz) and...

Function
23
G GLamp Mode: Adjusts the lamp brightness.
G
GOverscan: You can adjust from 90, 92, 94...100.
G
GGamma Mode: You can select this mode only when Picture Modeis Cinema/Expert 1/2.
G
GWhite Balance: Adjusts the overall feeling of the screen to your choice. You can select this function only
when Picture Modeis Cinema/Expert 1/2.
Adjustment: You can select Low, Mediumor High.
Level: You can adjust from 0to 8.
IRE: Automatically set from 0to 100according to Levelchange.
When you select User->...

Function
24
SCREEN Menu Options
1. Press the MENUbutton. Then, move to SCREENwith the ,,,
buttons and press the OK button.
2. Move to a sub-item with the  button. Then, use the 
,buttons to
move to 
PJT Mode and press the OKbutton.
3. Move to a desired item with the 
,buttons and then press the OK
button.
Select Rearwhen projecting from the back of the transparent screen purchased separately.
Select Ceilingwhen installing the product on the ceiling.Press the MENUor EXITbutton to exit the menu screen....

Function
25
KeystoneMovePrev.MENU
1. Press the KEYSTONEbutton of remote control.
2. Move to a desired item with the 
,buttons and then press the button.
3. Press the 
,,,button to adjust the screen condition as you want and
then press the 
OKbutton.
Keystonecan be adjusted from -100 to 100.Execute Reset to restore back to default factory settings. You can use this function through the MENUbutton. To exit the menu display, press the EXITbutton.
Using Keystone Function
* Use this function when the...

Function
26
1. Press the MENUbutton. Then, move to SCREENwith the ,,,buttons
and press the 
OK button.
2. Move to a sub-item with the  button. Then, use the 
,buttons to move to
RGB Config. and press the OKbutton.
3. Move to a desired item with the 
,buttons and then press the button.
4. Press the 
,,,button to adjust the screen condition as you want and
then press the 
OKbutton.
The Auto Configurefunction operates only for RGB input. If you execute
screen adjustment for a video from PC graphic signal,...

Function
27
OKMoveOPTION
Language : English
Blank Image : Blue
Sleep Time : Off
Auto Sleep : Off
Option Reset
1. Press the STILLbutton on the remote control.
* You can freeze the moving image.
2. To exit STILL, press any button.
* The STILL function will release automatically after approximately 10 minutes.
Using Still Function

OPTION Menu Options
1. Press the MENUbutton. Then, move to OPTIONwith the ,,,
buttons and press the OK button.
2. Move to a sub-item with the  button. Then, use the 
,buttons to...

Function
28
1. Press the MENUbutton. Then, move to OPTIONwith the ,,,
buttons and press the OK button.
2. Move to a sub-item with the  button. Then, use the 
,buttons to move
to 
Blank Image and press the OKbutton.
3. Move to a desired item with the 
,buttons and then press the OK
button.
Background color will be altered to the selected Blank function color.Press the MENUor EXITbutton to exit the menu screen.
Selecting Blank image color
OKMoveOPTION
Language : English
Blank Image : Blue
Sleep Time :...

Function
29
1. Press the MENUbutton. Then, move to OPTIONwith the ,,,
buttons and press the OK button.
2. Move to a sub-item with the  button. Then, use the 
,buttons to move
to 
Auto Sleep and press the OKbutton.
3. Move to 
Onwith the ,buttons and then press the OKbutton.
Press the MENUor EXITbutton to exit the menu screen.
Auto sleep Function
* This function turns the projector off automatically after 10 minutes is passed
when there is no signal.OKMoveOPTION
Language : English
Blank Image : Blue...

Information
30
Supported Monitor Display
Component-*1 HDMI(DTV)-*2 Signal 
* Cable type
1- Component Cable
2- HDMI Cable
60Hz480i
480p
720p
1080i
1080p
576i
576p
720p
1080i
1080p
1080p 50Hz
24/25/30HzO
O
O
O
O
O
O
O
O
O
OX
O
O
O
O
X
O
O
O
O
O
* The following table lists the display formats supported by the projector.
* If the projector does not support the input signal, “Out of Range” message appears on the screen.
* The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC...