Lexmark X792 Manual

Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
8Follow the instructions on the computer screen.
Note: For more information on allowing other computers on the network to use the wireless printer, see the
Networking Guide.
Installing the printer on a wireless network (Macintosh)
Note: Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.
Prepare to configure the printer
1...

In Mac OS X version 10.4
From the Finder, navigate to:
Applications > Internet Connect > AirPort
2From the Network Name pop‑up menu, select print server [yyyyyy], where the y’s are the last six digits of the MAC
address located on the MAC address sheet.
3Open a Web browser.
4From the Bookmarks menu, select Show or Show All Bookmarks.
5Under COLLECTIONS, select Bonjour or Rendezvous, and then double‑click the printer name.
Note: The application referred to as Rendezvous in Mac OS X version 10.2 is now...

dSelect a destination, and then click Continue.
eFrom the Easy Install screen, click Install.
fType the user password, and then click OK.
All necessary applications are installed in the computer.
gClick Close when the installation is complete.
2Add the printer:
aFor IP printing:
In Mac OS X version 10.5 or later
1From the Apple menu, navigate to either of the following:
System Preferences > Print & Scan
System Preferences > Print & Fax
2Click +.
3If necessary, click Add Printer or Scanner or Add Other...

Changing port settings after installing a new network ISP
Notes:
If the printer has a static IP address, then you do not need to make any changes.
If the computers are configured to use the network name, instead of an IP address, then you do not need to
make any changes.
If you are adding a wireless ISP to a printer previously configured for an Ethernet connection, then make sure
the printer is disconnected from the Ethernet network.
For Windows users
1
Open the printers folder.
2From the shortcut menu...

Minimizing your printers environmental impact
Lexmark is committed to environmental sustainability and is continually improving its printers to reduce their impact
on the environment. We design with the environment in mind, engineer our packaging to reduce materials, and provide
collection and recycling programs. For more information, see:
The Notices chapter
The Environmental Sustainability section of the Lexmark Web site at www.lexmark.com/environment
The Lexmark recycling program at...

Check your first draft for accuracy
Before printing or making multiple copies of a document:
Use the preview feature to see how the document looks like before you print it.
Print one copy of the document to check its content and format for accuracy.
Avoid paper jams
Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 231.
Saving energy
Using Eco‑Mode
1Type the printer IP address in the address field of your Web browser.
If you do not know the IP...

ChooseTo
Off
Note: Selecting Photo from the driver may disable Quiet
Mode and provide better print quality and full speed
printing.Use factory default settings. This setting supports the
performance specifications of your printer.
On Reduce printer noise.
Print jobs will process at a reduced speed.
Printer engine motors do not start until a document is
ready to print. There will be a short delay before the first
page is printed.
If your printer has faxing capability, fax sounds are
reduced or disabled,...

Adjusting the brightness of the printer display
To save energy, or if you have trouble reading from the display, adjust the brightness of the display.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
The IP address is located on the upper portion of the home screen. It appears as four sets of numbers
separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to load the Web page...

Using the printer control panel
1
From the home screen, navigate to:
 > Settings > General Settings > Output Lighting
2Touch the arrow button next to Normal/Standby Mode to select the light settings for the standard exit bin
when in Ready or Standby Mode.
3Touch Submit.
Recycling
Lexmark provides collection programs and environmentally progressive approaches to recycling. For more information,
see:
The Notices chapter
The Environmental Sustainability section of the Lexmark Web site at...

To return Lexmark cartridges for reuse or recycling, follow the instructions that came with your printer or cartridge and
use the prepaid shipping label. You can also do the following:
1Go to www.lexmark.com/recycle.
2From the Toner Cartridges section, select your country or region.
3Follow the instructions on the computer screen. Minimizing your printers environmental impact 60