Lexmark X792 Manual

Exporting and importing a configuration using the Embedded
Web Server
You can export configuration settings into a text file that can then be imported and used to apply the settings to one
or more additional printers.
Exporting a configuration
1From the Embedded Web Server, click Settings or Configuration.
2Click Device Solutions > Solutions (eSF), or click Embedded Solutions.
3From Installed Solutions, click the name of the application you want to configure.
4Click Configure > Export.
5Follow the...

Activating the home screen applications
Your printer comes with preinstalled home screen applications. You can activate and set up these applications using
the Embedded Web Server. To access the Embedded Web Server, see 
“Accessing the Embedded Web Server” on
page 20.
For detailed information about configuring and using the home screen applications, go to the Lexmark support Web
site at 
http://support.lexmark.com.
Setting up Forms and Favorites
IconDescription
The application helps you simplify and...

3Specify the destinations, and then customize the settings.
4Click Apply.
To use the application, touch Scan to Network on the printer home screen, and then follow the instructions on the
printer display.
Setting up My MFP
IconDescription
The application lets you customize your touch‑screen settings and store those preferences in a flash
drive. Each time you want to copy, fax, or scan, insert the flash drive into the USB port of the printer. All
your personal preferences are automatically uploaded,...

3Select the Enabled check box, and then customize the settings.
4Click Apply.
To use the application, from the Embedded Web Server, click Applications > Remote Operator Panel > Launch VNC
Applet. Setting up and using the home screen applications 24 

Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
You can customize your printer connectivity and memory capacity by adding optional...

Using the security lock feature
The printer is equipped with a security lock feature. When a lock compatible with most laptop computers is attached,
the printer is locked. Once locked, the metal plate and the system board cannot be removed. Attach a security lock to
the printer in the location shown.
Accessing the system board
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and...

Note: This task requires a flathead screwdriver.
1Open the cover.
2Remove the metal panel.
aTurn the screws on the panel counterclockwise to remove them.
Additional printer setup27 

bShift the metal panel to the left to disengage the hooks, then pull forward to remove it.
3Use the following illustration to locate the appropriate connectors.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or connectors.
1
2
3
4
1Memory card connector
2Firmware and flash memory card connectors
3Internal print server connector
4Hard disk connector
4Reattach...

Warning—Potential Damage: System board electronic components are easily damaged by static electricity.
Touch something metal on the printer before touching any system board electronic components or
connectors.
aReinstall the hooks on the left side of the metal panel into the slots on the system board cage, and then shift
to the right.
Additional printer setup29 

bAlign and then turn each screw clockwise to tighten.
cClose the cover.
Installing a memory card
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well,
and unplug any cables going into the printer.
Warning—Potential Damage: System board...