Lexmark X6570 User Manual

2Remove all tape and packing material from all areas of the printer.
3Raise the control panel.
4Extend the paper exit tray.
5Raise the paper support.
 
21
Downloaded From ManualsPrinter.com Manuals 

6Extend the paper guides.
7Load paper.
8Connect the power cord.
2
1
9Make sure the power is on.
 
22
Downloaded From ManualsPrinter.com Manuals 

10If prompted, set the language.
211
aUsing the control panel of the printer, press  or  repeatedly until the language you want appears on the
display.
bPress  to save.
11If prompted, set the country/region.
211
aUsing the control panel of the printer, press  or  repeatedly until the country or region you want appears
on the display.
bPress  to save.
12Open the printer.
13Press down on the cartridge carrier levers.
 
23
Downloaded From ManualsPrinter.com Manuals 

14Remove the tape from the black print cartridge, and insert it in the left cartridge carrier.
15Close the black cartridge carrier lid
16Remove the tape from the color print cartridge, and insert it in the right cartridge carrier.
17Close the color cartridge lid.
 
24
Downloaded From ManualsPrinter.com Manuals 

18Close the printer.
19Press .
An alignment page prints.
20Discard the alignment page.
Notes:
The alignment page that prints may differ from the one shown.
Streaks on the alignment page are normal and not an indication of a problem.
Installing the printer on additional network computers
If you are installing your network printer for use with multiple computers on the network, insert the installation CD
into each additional computer, and follow the instructions on the computer screen.
You do not need to...

Setting up the printer on a Windows operating system
1Before you unpack the printer or attach anything, locate the CD for Windows.
2Make sure the computer is on, and then insert the CD for Windows.
Wait several seconds for the install screen to appear.
Note: If the install screen does not appear automatically, click Start ΠRun, and then type D:\setup.exe, where
D is the letter of your CD-ROM drive.
3Follow the instructions on the computer screen to set up the printer.
Your security software may notify...

Getting the printer ready to fax
Using an RJ11 adapter
Country/region
United Kingdom
Ireland
Finland
Norway
Denmark
Italy
Sweden
Netherlands
France
Portugal
To connect your printer to an answering machine or other telecommunications equipment, use the telephone line
adapter included in the box with the printer.
1Connect one end of the telephone cord into the Line port  of the printer.
2Connect the adapter to the telephone line that came with the printer.
Note: The UK adapter is shown. Your adapter may...

If your telecommunications equipment uses a US-style (RJ11) telephone line, follow these steps to connect the
equipment:
1Remove the plug from the EXT port on the back of the printer.
Note: Once this plug is removed, any country- or region-specific equipment you connect to the printer by the
adapter, as shown, will not function properly.
2Connect your telecommunications equipment directly to the EXT port on the back of the printer.
Warning: Do not touch cables or the printer in the area shown while...

To connect an answering machine or other telecommunications equipment to the printer:
1Remove the plug from the back of the printer.
Note: Once this plug is removed, any country- or region-specific equipment that you connect to the printer by
the adapter, as shown, will not function properly.
2Connect your telecommunications equipment directly to the EXT port on the back of the printer.
Warning: Do not touch cables or the printer in the area shown while actively sending or receiving a fax....

Choosing a fax connection
You can connect the printer with equipment such as a telephone, an answering machine, or a computer modem. If
problems occur, see “Setup Troubleshooting” on page 137.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other devices (such
as a telephone or answering machine) can be successfully attached to pass through the printer, as described in the
setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a...