Lexmark X654de MFP User Manual

Some held jobs were not restored
Touch Continue to delete the specified job.
Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible.
System busy, preparing resources for job.
Not all resources needed for the job are available. Wait for the message to clear.
System busy, preparing resources for job. Deleting held job(s).
Not all resources needed for the job are available. Some held jobs are deleted to free system memory. Wait for the
message to clear.
Unsupported disk
An...

34 Short paper
Try one or more of the following:
Load the appropriate paper or other specialty media in the proper tray.
Touch Continue to clear the message and print the job using a different paper tray.
Check tray length and width guides and make sure the paper is properly loaded in the tray.
Check the Print Properties or Print dialog settings to make sure the print job is requesting the correct paper size
and type.
Check that the paper size is correctly set. For example, if the MP Feeder Size is set...

38 Memory full
Try one or more of the following:
Touch Continue to clear the message.
Cancel the current print job.
Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
Touch Continue to clear the message and continue printing.
Cancel the current print job.
Install additional printer memory.
42.xy Cartridge region mismatch
Install a print cartridge that matches the region number of the printer. x indicates the value of the printer region. y...

52 Not enough free space in flash memory for resources
Try one or more of the following:
Touch Continue to clear the message and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
Delete fonts, macros, and other data stored in flash memory.
Upgrade to a larger capacity flash memory card.
53 Unformatted flash detected
Try one or more of the following:
Touch Continue to stop the defragment operation and continue printing.
Format the flash memory. If the error...

55 Unsupported option in slot 
 is a slot on the printer system board.
Try one or more of the following:
1Turn the printer power off.
2Unplug the power cord from the wall outlet.
3Remove the unsupported option card from the printer system board.
4Connect the power cord to a properly grounded outlet.
5Turn the printer power back on.
56 Parallel port  disabled
 is the number of the parallel port.
Try one or more of the following:
Touch Continue to clear the message.
The printer discards any data received...

56 USB port  disabled
 is the number of the USB port.
Try one or more of the following:
Touch Continue to clear the message.
The printer discards any data received through the USB port.
Make sure the USB Buffer menu item is not set to Disabled.
57 Configuration change, held jobs were not restored
Since the time the jobs were stored on the printer hard disk something has changed in the printer to invalidate the
held jobs. Possible changes include:
The printer firmware has been updated.
Paper input,...

4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
58 Too many trays attached
1Turn the printer off.
2Unplug the power cord from the wall outlet.
3Remove the additional trays.
4Connect the power cord to a properly grounded outlet.
5Turn the printer back on.
59 Incompatible envelope feeder
Try one or more of the following:
Remove the envelope feeder.
Touch Continue to clear the message and continue printing without using the envelope feeder.
59 Incompatible output bin 
Try...

63 Unformatted disk
Try one or more of the following:
Touch Continue to clear the message and continue printing.
Format the printer hard disk.
If the error message remains, the hard disk may be defective and require replacing.
80 Routine maintenance needed
The printer needs to have routine maintenance done. Order a maintenance kit, which contains all the items necessary
to replace the pick rollers, the charge roll, the transfer roller, and the fuser.
88 Cartridge low
The toner is low. Replace the print...

Try one or more of the following:
Touch Continue if no scan job is active when the attendance message appears. This clears the message.
Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears
the message.
Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF
immediately after the last successfully scanned page.
Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the...

1565 Emulation error, load emulation option
The printer automatically clears the message in 30 seconds and then disables the download emulator on the firmware
card.
To fix this, download the correct download emulator version from the Lexmark Web site at www.lexmark.com. Understanding printer messages250
Downloaded From ManualsPrinter.com Manuals