Lexmark X651de User Manual

Solving paper feed problems.................................................................................................................278
Paper frequently jams..................................................................................................................................... 278
Paper jam message remains after jam is cleared ........................................................................................... 279
Page that jammed does not reprint after you clear the jam...

Safety information
Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.
Do not place or use this product near water or wet locations.
CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous radiation exposure.
This product uses a printing process that heats the print media, and the heat may cause the media to release emissions.
You...

Refer service or repairs, other than those described in the user documentation, to a professional service person.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug
the power cord from the wall outlet and disconnect all cables from the printer before proceeding.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the fax feature, power cord, or...

Learning about the printer
Finding information about the printer
Setup information
DescriptionWhere to find
The Setup information gives you instructions for setting up
the printer. Follow the set of instructions for local, network,
or wireless, depending on what you need.You can find the Setup information on the side of the printer
box or on the Lexmark Web site at www.lexmark.com.
Help
DescriptionWhere to find
The Help gives you instructions for using the
software.While in any Lexmark software program,...

DescriptionWhere to find (North America)Where to find (rest of world)
E-mail supportFor e-mail support, visit our Web site:
www.lexmark.com.
1Click SUPPORT.
2Click Technical Support.
3Select your printer type.
4Select your printer model.
5From the Support Tools section, click
e-Mail Support.
6Complete the form, and then click
Submit Request.E‑mail support varies by country or region,
and may not be available in some instances.
Visit our Web site at www.lexmark.com.
Select a country or region, and then...

Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
options, leave enough room for them also. It is important to:
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
Provide a flat, sturdy, and stable surface.
Keep the printer:
–Away from the direct airflow of air conditioners, heaters, or ventilators
–Free from direct sunlight, humidity extremes, or temperature...

Understanding the ADF and scanner glass
Automatic Document Feeder (ADF)Scanner glass
A
Use the ADF for multiple‑page documents.Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine
clippings or lightweight carbonless forms).
You can use the ADF or the scanner glass to scan documents.
Using the ADF
The Automatic Document Feeder (ADF) can scan multiple pages, including duplex pages. When using the ADF:
Load the...

Understanding the printer control panel
12ABC3DEF6MNO5JKL4GHI9WXYZ8TUV7PQRS# 0*
1
2
4
5
6
7
8
3
ItemDescription
1Display View scanning, copying, faxing, and printing options as well as status and error messages.
2Keypad
12ABC3DEF
6MNO5JKL4GHI
9WXYZ8TUV7PQRS
# 0*
Enter numbers or symbols on the display.
3Dial Pause
Press  to cause a two- or three-second dial pause in a fax number. In the Fax To field, a
Dial Pause is represented by a comma (,).
From the home screen, press  to redial a fax number.
The...

ItemDescription
6Start
Press  to initiate the current job indicated on the display.
From the home screen, press  to start a copy job with the default settings.
If pressed while a job is scanning, the button has no effect.
7Indicator light Indicates the printer status:
Off—The power is off.
Blinking green—The printer is warming up, processing data, or printing.
Solid green—The printer is on, but idle.
Blinking red—Operator intervention is needed.
8Stop
Stops all printer activity
A list of options is...

Display itemDescription
5Status message bar
Shows the current printer status such as Ready or Busy.
Shows printer conditions such as Toner Low.
Shows intervention messages to give instructions on what you should do so the printer can
continue processing, such as Close door or Insert print cartridge.
6Status/Supplies Appears on the display whenever the printer status includes a message requiring intervention.
Touch it to access the messages screen for more information on the message, including how
to...