Lexmark X543 Service Manual

Diagnostic information2-7
Lexmark confidential until announce7525xxx
Load Manual 
Printer does not detect media meeting the description  in the single 
sheet feeder (manual feeder).
The following actions can be taken:
 Load paper and the job continues.
Select ( ), and choose an alternate source for media.
 Cancel the current job.
Load Manual 
Printer does not detect media meeting the description  in the single sheet 
feeder (manual feeder).
The following actions can be taken:
 Load paper and the job...

2-8Ser vice Manual 7525xxxLexmark confidential until announce
31.xx Defective  
cartridgeThe specified cartridge is defective. Try one of the following:
 Open and close the top cover.
 Remove and re-install the cartridge(s). Listen for the click to ensure the cartridge 
is installed properly.
 Turn the printer power off and turn the printer power on.
If the message persists, replace the cartridge with a new one, and close the front 
cover.
31.xx Defective Imaging 
Kit.Defective imaging kit. Try one or...

Diagnostic information2-9
Lexmark confidential until announce7525xxx
37 Insufficient memory 
for flash defragment 
operationThis message is displayed when insufficient printer memory is available to perform 
Flash Memory Defragment operation.
This message appears prior to the actual start of the defragment operation.
press
 Select ( ) to stop the defragment operation.
To perform the defragment operation, you can:
 Delete fonts, macros, and other data in RAM.
 Install additional printer memory.
Menus ( )...

2-10Service Manual 7525xxxLexmark confidential until announce
53 Unformatted Flash press
 Select (  to clear the message and continue printing.
You must format the flash memory before you can store any resources on it. If the 
error message remains, the flash memory may be defective and require replacing.
54 Standard Network 
Software ErrorThis message is displayed when the RIP software detects that a network port is 
installed but cannot establish communications with it.

 Select (  to clear the message...

Diagnostic information2-11
Lexmark confidential until announce7525xxx
88  Cartridge 
Early WarningThe term  includes black, cyan, magenta, and yellow.
 Replace the toner cartridge and press
 Select (  to clear the message and 
continue printing.
88 Replace  
CartridgeThe term  includes black, cyan, magenta, and yellow.
 Replace the toner cartridge and press
 Select (  to clear the message and 
continue printing.
Scanner ADF cover 
openThe cover to the ADF is open.
 Close the ADF cover. If this doesn’t...

2-12Service Manual 7525xxxLexmark confidential until announce
Paper Jam messages
Paper jam messages (2xx)
Error code Description Action
2xx paper jams
200.xx Paper Jam
Check A single page of media jam at the input 
sensor. Remove the tray1 unit, open the front door, 
and remove the print cartridge to access 
the jam area. Remove the jammed page. 
See “200 paper jams” on page 3-41. 
200.xx Paper Jam
 Pages JammedMultiple pages of media are jammed at 
the input sensor. Open the front door and remove the...

Diagnostic information2-13
Lexmark confidential until announce7525xxx
290.20 Scanner 
Static Jam-Paper 
PresentThis message occurs when paper is 
detected in the ADF during a POR, or 
when the MFP is starting up.Remove original documents from the ADF.
290.30-Scanner 
Static Jam-Paper 
StopThis message displays when paper is 
inserted past the paper stop on the 
ADF.Remove original documents from the ADF.
291.00 Scanner Jam, 
remove all originals 
from the scanner Scanner ADF detects paper at the 
second...

2-14Service Manual 7525xxxLexmark confidential until announce
Service error messages
Service error messages (1XX, 8XX and 9xx)
Error code Description Action
106.xx Ser vice
Yellow Printhead Yellow printhead error. Perform a POR. If the problem persists, go 
to “Printhead service check” on 
page 2-59. 
106.01 Service
Yellow Printhead The yellow printhead lost HSYNC. Perform a POR. If the problem persists, go 
to “Printhead service check” on 
page 2-59. 
106.02 Service
Yellow PrintheadThe yellow printhead...

Diagnostic information2-15
Lexmark confidential until announce7525xxx
107.07 Service
Cyan PrintheadThe cyan printhead thermistor is 
shorted to ground.Perform a POR. If the problem persists, go 
to “Printhead service check” on 
page 2-59. 
107.08 Service
Cyan PrintheadThe cyan laser showed bad in EMS 
testing.Perform a POR. If the problem persists, go 
to “Printhead service check” on 
page 2-59. 
108.xx Ser vice
Magenta PrintheadMagenta printhead error. Perform a POR. If the problem persists, go 
to...

2-16Service Manual 7525xxxLexmark confidential until announce
109.05 Service
Black PrintheadFailure reading NVRAM from 
printhead.Perform a POR. If the problem persists, go 
to “Printhead service check” on 
page 2-59. 
109.06 Service
Black PrintheadThe black printhead thermistor is open. Perform a POR. If the problem persists, go 
to “Printhead service check” on 
page 2-59. 
109.07 Service
Black PrintheadThe black printhead thermistor is 
shorted to ground.Perform a POR. If the problem persists, go 
to...