Lexmark X3650 User Manual

Using the Windows printer software
When you set up the printer using the printer software CD, all the necessary software was installed. You may have
chosen to install some additional programs. The following table provides an overview of various software programs
and what they can help you do.
Note: Your printer may not come with some of these programs or some of the functions of these programs, depending
on the features of the printer that you purchased.
Use theTo
LexmarkTM Productivity StudioScan, copy,...

Use theTo
Lexmark Service CenterTroubleshoot the printer.
Access the printer maintenance functions.
Contact customer support.
Notes:
This program is installed automatically with the printer software.
You may be prompted to install this program from the Web, depending
on your printer model.
Printing PreferencesWhen you select File ΠPrint with a document open and then click
Properties, a Printing Preferences dialog appears. The dialog lets you select
options for the print job such as the following:
Select...

Use theTo
Lexmark Fax Setup UtilityCustomize settings for fax jobs.
Create and edit the Speed Dial list.
Lexmark Network Card ReaderView the contents of a memory device inserted into a network printer.
Transfer photos and documents from a memory device to the computer over
a network.
Lexmark Printer UtilityGet help with cartridge installation.
Print a test page.
Print an alignment page.
Clean the print cartridge nozzles.
Order ink or supplies.
Register the printer.
Contact customer support.
Lexmark...

In Windows XP and earlier
1
Click Start.
2Click Run.
3Type D:\setup.exe, where D is the letter of your CD or DVD drive.
cFollow the instructions on the computer screen.
Using Macintosh
aInsert the installation software CD.
bWait for the Welcome screen to appear.
Note: If the Welcome screen does not appear after a minute, then click the CD icon on the desktop.
cDouble-click Install.
dFollow the instructions on the computer screen.
 
34
Downloaded From ManualsPrinter.com Manuals 

Installing the printer on a wireless network
(selected models only)
Wireless network compatibility
Your printer contains an IEEE 802.11g wireless print server. Your printer is compatible with IEEE 802.11 b/g/n routers
that are Wi-Fi certified. If you are having issues with an n router, verify with your router manufacturer that the current
mode setting is compatible with g devices, as this setting varies depending on the router brand/model.
Information you will need to set up the printer on a
wireless...

Installing the printer on a wireless network
Before you install the printer on a wireless network, make sure that:
You have completed the initial setup of the printer.
Your wireless network is set up and working properly.
The computer you are using is connected to the same wireless network where you want to set up the printer.
Using Windows
1Insert the installation software CD.
2Wait a minute for the Welcome screen to appear.
If the Welcome screen does not appear after a minute, do one of the following:...

5Return to the computer screen, and choose the network you want to connect to. If you want to use the network
shown, choose Connect to , and then click Continue.
If you do not want to use the network shown:
aChoose Connect to another network, and then click Continue.
bChoose the network you want to use from the list of available networks, and then click Continue.
6Enter the Network key, and then click Continue.
Note: Your WEP, WPA, or WPA2 key may be obtained from the bottom of the box, the user’s guide...

–The printer is trying to establish communication with the wireless access point (wireless router).
This is true if you have already configured the printer for use on your wireless network. When the printer has
been configured, any time you turn the printer off and then turn it back on, the internal print server in the
printer will try to connect to your wireless access point (wireless router).
–The wireless settings of the printer may no longer be valid.
Green indicates that the printer is connected to...

From hereYou can
TCP/IPView network settings.
File PrintChoose whether to select a network computer
automatically or manually for File Print jobs.
If the setting is Auto Select, then the printer selects
a network computer automatically.
If the setting is Manual, or if the setting is Auto Select
but the network computers detected by the printer
require a PIN, then you need to select a network
computer from the File Print menu.
Reset Network Adapter DefaultsReset the internal wireless print server to...

In Windows XP and earlier
aClick Start.
bClick Run.
cType D:\setup.exe, where D is the letter of your CD or DVD drive.
3Follow the on-screen instructions for installing a configured printer on a new computer.
Using Macintosh
1Insert the installation software CD.
2Wait for the Welcome screen to appear.
Note: If the Welcome screen does not appear after a minute, click the CD icon on the desktop.
3Double-click Install.
4Follow the on-screen instructions for installing a configured printer on a new...