Lexmark X3650 User Manual

Using the taskbar in Windows
1Double-click the printer icon in the taskbar.
2Do one of the following:
If you want to cancel a particular print job, right-click the document name, and then select Cancel.
If you want to cancel all print jobs in the queue, click Printer ΠCancel All Documents.
Using Macintosh
1While the document is printing, click the printer icon in the Dock.
2From the print queue dialog, choose the job that you want to cancel, and then click Delete.
 
71
Downloaded From ManualsPrinter.com...

Working with photos
You can also use the programs that are installed with the printer software to customize and print photos. For more
information, see the Help associated with these programs.
Inserting a memory card
1Insert a memory card.
Insert the card with the brand name label facing up.
If there is an arrow on the card, make sure it points toward the printer.
If needed, make sure you connect the memory card to the adapter that came with it before inserting it into
the slot.
SlotMemory card
1Secure...

2Wait for the light located near the top memory card slot on the printer to come on. The light blinks to indicate
the memory card is being read or is transmitting data.
Warning—Potential Damage: Do not touch cables, any network adapter, any connector, the memory card, or
the printer in the area shown while actively printing, reading, or writing from the memory card. A loss of data
can occur. Also, do not remove the memory card while actively printing, reading, or writing from it.
When the printer detects...

Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
Retrieving and managing photos
Transferring photos from a memory device to the computer
Using the printer control panel
Notes:
You cannot transfer photos from a memory device to a computer through an external network adapter that does
not support memory device connection.
The printer may require...

cOn the computer screen, select an option to save photos to the computer.
dFollow the instructions on the computer screen.
Using Lexmark Productivity Studio in Windows
If you installed Lexmark Productivity Studio, and if the printer is connected to the computer through a USB cable,
then the program launches when you insert the memory device. Follow the instructions on the computer screen
to transfer photos.
If the printer is connected to the computer through a network:
1Do one of the following:
–In...

Transferring photos from a memory card to a flash drive
1Insert a memory card into the printer.
2After the memory card is detected, press the arrow buttons until Save Photos appears.
3Insert the flash drive into the printer, and then press the arrow buttons until USB Flash Drive appears.
4Use the arrow buttons to select a save option. You can transfer all the photos, the most recent photo, or photos
within a date range. Press 
 when you make a selection.
5Follow the instructions on the printer control...

Printing photos from the computer using the printer software
1Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
then see the instructions that came with the paper.)
2To print the photos:
Using Windows
aDo one of the following:
In Windows Vista, click .
In Windows XP and earlier, click Start.
bClick All Programs or Programs, and then select the printer program folder from the list.
cSelect Lexmark Productivity Studio.
Note: This program...

USB connection
aPress .
bIf you are using Windows:
If you installed Lexmark Productivity Studio, then it launches when you insert the memory device. Follow the
instructions on the computer screen to transfer the photos to the computer, and then use the programs
installed on the computer to print the photos.
If you are using Macintosh:
If you have iPhoto installed on the computer, then it launches when you insert the memory device. Follow
the instructions on the computer screen to transfer the photos to...

5Press the arrow buttons to select an option on how to print the photos, and then press .
Note: You can choose to print the most recent photo, print all the photos, print photos that fall within a date
range, or print photos by selecting photo numbers.
Lighter/Darker appears on the display.
6Press the arrow buttons to adjust the brightness of the photo, and then press .
Photo Effects appears on the display.
7Press the arrow buttons to select a color effect. You can choose to auto-enhance the photo, or...

3If the PictBridge connection is successful, then the following message appears on the display: PictBridge
Camera detected. Press OK to change settings.
4Use the camera to choose and print photos. If desired, you can also use the Pictbridge menu to select the paper
size, paper type, photo size, and layout of the photos that you want to print.
Press 
 to access the PictBridge menu, and then press  each time you make a selection.
Notes:
If you insert the camera while the printer is performing another job,...