Lexmark X3550 User Manual

Limited Warranty
DescriptionWhere to find (US)Where to find (rest of world)
Limited Warranty Information
Lexmark International, Inc.
furnishes a limited warranty that this
printer will be free of defects in
materials and workmanship for a
period of 12 months after the
original date of purchase.To view the limitations and conditions of
this limited warranty, see the Statement of
Limited Warranty included with this
printer, or set forth at
www.lexmark.com.
1Click CUSTOMER SUPPORT.
2Click Warranty...

Setting up the printer
Checking the box contents
NameDescription
1Black print cartridgeCartridges to be installed into the printer.
Note: Cartridge combinations vary depending on the product
purchased.
2Color print cartridge
3Power cordAttaches to the power supply port located at the back of the printer.
Note: Your power cord may look different from the one shown.
4Installation software CD for WindowsInstallation software for the printer
Help
Users Guide in electronic format
5Installation software CD for...

Installing another language control panel
These instructions apply only if you received one or more additional language control panels with the printer.
1Lift and remove the control panel (if one is installed).
2Choose the correct control panel for your language.
3Align the clips on the control panel with the holes on the printer, and then press down.
 
13
Downloaded From ManualsPrinter.com Manuals 

Networking the printer
For complete networking information, please refer to the Getting Started booklet that came with the product.
Installing the printer on a network
Follow the instructions for the networking method you want to use. Make sure the selected network is set up and
working properly, and that all relevant devices are turned on. For more information on your specific network, see
your network documentation or consult the person who set up the network.
Installing an internal wireless print...

4Align the edges of the internal wireless print server with the guides on the left and right, and then slide the wireless
print server into the printer until it snaps into place.
5Make sure the antenna points up.
6Attach the adhesive label with the MAC address to the back of the printer. You will need this later to in order to
network the printer.
You are now ready to configure the internal wireless print server to work on your wireless network.
Finding your MAC address
In order to complete the network...

Learning about the printer
Understanding the parts of the printer
Use theTo
1Paper supportLoad paper.
2Wi-Fi indicatorCheck wireless status:
Off indicates that the printer is not turned on or that no wireless option is installed.
Orange indicates that the printer is ready for wireless connection, but not connected.
Orange blinking indicates that the printer is configured but unable to communicate
with the wireless network.
Green indicates that the printer is connected to a wireless network.
3PictBridge...

Use theTo
1Scanner unitAccess the print cartridges.
2Print cartridge carrierInstall, replace, or remove a print cartridge.
3Lexmark N2050 (internal wireless print server)Connect the printer to a wireless network.
Note: Only the 4500 Series comes with an internal wireless
print server installed.
4USB portConnect the printer to a computer using a USB cable.
5Power supply with portConnect the printer to a power source.
Using the control panel buttons and menus
Using the control panel
The display shows:...

PressTo
2Copy ModeAccess the copy default screen and make copies.
Note: The mode is selected when the button light is on.
3Scan ModeAccess the scan default screen and scan documents.
Note: The mode is selected when the button light is on.
4Photo CardAccess the photo default screen and print photos.
Note: The mode is selected when the button light is on.
5SettingsAccess the settings default screen and change printer settings.
Note: Other button lights are off when this button is selected.
6Lighter /...

PressTo
1Start ColorStart a color copy, scan, or photo print job, depending on which mode is selected.
2Start BlackStart a black-and-white copy, scan or photo print job, depending on which mode is selected.
Using the Copy menu
To access and navigate the Copy menu:
1From the control panel, press Copy Mode.
The copy default screen appears.
2If you do not want to change a setting, press Start Color or Start Black.
3If you want to change a setting, press .
4Press  or  repeatedly until the menu item you want...

Use thisTo
Copies*Specify how many copies to print.
Resize*Specify the percentage for enlarging or reducing the original copy.
Specify a specific copy size.
Create a multiple-page poster.
Lighter / Darker*Adjust the brightness of a copy.
Quality*Adjust the quality of a copy.
Paper SetupSpecify the size and type of the paper loaded.
Repeat Image*Choose how many copies of an image to print on a page.
CollatePrint one or more copies in the correct order.
N-Up*Choose how many pages to print on a page....