Lexmark T654dn User Manual

6Load the envelopes in the envelope feeder.
7Adjust the paper guide.
8Lower the envelope weight.
9Press .
271–279 paper jams
To clear a jam in the output expander, high‑capacity output stacker, the 5‑bin mailbox, or the StapleSmart II Finisher:
1If the paper is exiting into a bin, then pull the paper straight out, and then press .
If not, then continue with step 2.
2Pull down the output bin door or doors.
3Remove the jammed paper.
4Close the output bin door or doors.
5Press .
280 paper jams
1Pull down...

281 paper jam
1Clear the jam from the stapler output bin.
2Press .
282 paper jam
To prevent paper jams, the stapler motor does not run when the stapler door is open.
1Close the stapler door until it clicks into place.
2Press . Clearing jams92
Downloaded From ManualsPrinter.com Manuals 

283 staple jam
1Press the latch to open the stapler door.
2Pull the latch of the staple cartridge holder down, and then pull the holder out of the printer.
3Use the metal tab to lift the staple guard, and then remove any loose staples.
Clearing jams93
Downloaded From ManualsPrinter.com Manuals 

4Press down on the staple guard until it snaps into place.
5Push the cartridge holder firmly back into the stapler unit until the cartridge holder clicks into place.
6Close the stapler door.
7Press . Clearing jams94
Downloaded From ManualsPrinter.com Manuals 

Understanding printer menus
Menus list
A number of menus are available to make it easy for you to change printer settings:
Paper Menu Reports Network/Ports
Default Source
Paper Size/Type
Configure MP
Envelope Enhance
Substitute Size
Paper Texture
Paper Weight
Paper Loading
Custom Types
Universal Setup
Bin SetupMenu Settings Page
Device Statistics
Network Setup Page
1
Profiles List
NetWare Setup Page
Print Fonts
Print Directory
Asset ReportActive NIC
Standard Network
2
Standard USB
Parallel 
Serial 
SMTP...

Paper menu
Default Source menu
Menu itemDescription
Default Source
Tray 
MP Feeder
Envelope Feeder
Manual Paper
Manual EnvSets a default paper source for all print jobs
Notes:
Tray 1 (standard tray) is the factory default setting.
Only an installed paper source will appear as a menu setting.
A paper source selected by a print job will override the Default Source
setting for the duration of the print job.
If the same size and type of paper are in two trays and the Paper Size and
Paper Type settings match,...

Menu itemDescription
Tray  Type
Plain Paper
Card Stock
Transparency
Recycled
Labels
Vinyl Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton Paper
Custom Type Specifies the type of paper loaded in each tray
Notes:
Plain Paper is the factory default setting for Tray 1. Custom Type  is
the factory default setting for all other trays.
If available, a user‑defined name will appear instead of Custom
Type .
Use this menu item to configure automatic tray linking. If the same...

Menu itemDescription
MP Feeder Type
Plain Paper
Card Stock
Transparency
Recycled
Labels
Vinyl Labels
Bond
Envelope
Rough Envelope
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton Paper
Custom Type Specifies the type of paper loaded in the multipurpose feeder
Notes:
From the Paper menu, Configure MP must be set to Cassette in order
for MP Feeder Type to appear as a menu item.
Plain Paper is the factory default setting.
Envelope Feeder Size
7 3/4 Envelope
9 Envelope
10 Envelope
DL...

Menu itemDescription
Manual Paper Type
Plain Paper
Card Stock
Transparency
Recycled
Labels
Vinyl Labels
Bond
Letterhead
Preprinted
Colored Paper
Light Paper
Heavy Paper
Rough/Cotton Paper
Custom Type Specifies the type of paper being manually loaded
Note: Plain Paper is the factory default setting.
Manual Envelope Size
7 3/4 Envelope
9 Envelope
10 Envelope
DL Envelope
Other EnvelopeSpecifies the size of the envelope being manually loaded
Note: DL Envelope is the international factory default setting. 10...

Envelope Enhance
The envelope conditioner significantly reduces the wrinkling of some envelopes.
Menu itemDescription
Envelope Enhance
Off
1 (Least)
2
3
4
5
6 (Most)Enables or disables the envelope conditioner
Notes:
The factory default setting is 5.
If noise reduction is more important than wrinkle reduction, then
decrease the setting.
Substitute Size menu
Menu itemDescription
Substitute Size
Off
Statement/A5
Letter/A4
All ListedSubstitutes a specified paper size if the requested paper size is not...