Lexmark Pinnacle Pro901 User Manual

Printing specialty documents
Printing envelopes
1Load the envelopes in the printer.
2Send the print job:
For Windows users
aWith a document open, click File  Print.
bClick Properties, Preferences, Options, or Setup.
cFrom the Paper Type list of the Print Setup tab, select Plain Paper.
dFrom the Paper Size list, select the envelope size.
Note: To print on a custom-size envelope, select Custom Size, and then specify the height and width of the
envelope.
eSelect an orientation.
fClick OK to close any...

cFrom the Paper Size list of the Print Setup tab, choose a paper size that matches the size of the label sheet. If
no paper size matches the label sheet size, then set a custom size.
If necessary, choose the appropriate type of paper from the Paper Type list.
dClick OK to close any printer software dialogs.
eClick OK or Print.
For Macintosh users
aWith a document open, choose File > Print.
bFrom the Printer pop-up menu, choose the printer.
cIf necessary, click the disclosure triangle.
dFrom the print...

For Macintosh users
1With a document open, choose File > Print.
2From the printer pop-up menu, choose the printer.
3If necessary, click the disclosure triangle.
4From the print options pop-up menu, choose Copies & Pages and then click Page Setup.
5From the Settings or Paper Size pop-up menu, choose Custom Paper Size or Manage Custom Sizes.
6Adjust the settings as needed to create a custom size.
7Click OK.
8Click Print.
Working with photos
Using a memory card or flash drive with the printer
Memory cards...

Warning—Potential Damage: Do not touch any cables, any network adapter,
any connector, the memory device, or the printer in the areas shown while
actively printing, reading, or writing from the memory device. A loss of data can
occur.
2The Memory Device screen appears on the display.
Notes:
If the printer does not recognize the memory device, then remove and reinsert it.
If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is
in the card slot,...

3Touch View Photos.
The Select Photos screen appears.
4Touch the photo or photos you want to print.
Tips:
If you want to clear a selected photo, then touch the photo again.
If you want to view more photos, then touch the left or right arrow, and then touch the photo to select it.
5When you are finished selecting the photos you want to print, touch Layout.
6If you want to change the print settings, then touch Change Settings.
If necessary, touch Accept each time you make a selection.
7Press .
Note: For...

9Repeat steps 4 through 8 until all the photos are edited, and then touch Layout.
10If you want to change the print settings, then touch Change Settings.
If necessary, touch Accept each time you make a selection.
11Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a memory device using the printer software
1Load photo paper.
2Insert a memory card or flash drive.
3Transfer or print the photos:
If the printer is using a...

Printing photos from a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer.
1Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
Make sure that the PictBridge-enabled digital camera is set to the correct USB mode. If the camera USB...

4If you want to change the default print settings:
aTouch More Options to access the PictBridge menu.
bSelect the paper source, paper size, paper type, photo size, quality, and layout of the photos that you want
to print. Touch Accept each time you make a selection.
Note: The printer will use the default print settings unless you change the print settings from the camera.
5See the documentation for your camera to begin printing.
Note: If you insert the camera while the printer is performing another job,...

Printing from a Bluetooth-enabled device
This printer is compliant with Bluetooth Specification 2.0. It supports the following profiles: Object Push Profile
(OPP) and Serial Port Profile (SPP). Check with your Bluetooth-enabled device manufacturers (cellular phone or
PDA) to determine their hardware compatibility and interoperability. It is recommended that you use the latest
firmware on your Bluetooth-enabled device.
To print Microsoft documents from your Windows® Mobile/Pocket PC PDA, additional...

Bluetooth Dongle Connected appears on the display.
Note: A Bluetooth adapter is not included with the printer.
2From the home screen, navigate to Discovery:
 > Bluetooth Setup > Discovery
3Make sure Discovery is set to ON. If necessary, touch ON, and then touch Accept.
The printer is now ready to accept a connection from a Bluetooth-enabled device.
4Configure the Bluetooth-enabled device to set up a connection to the printer. For more information, see the
documentation for your Bluetooth device.
Note: If...