Lexmark Optra S 1250 Manual

185Understanding Printer Messages
Understanding Printer
Messages
Caring for Your Printer
35ResSaveOff
Deficient MemoryThe printer lacks the memory needed to enableResource Save.This
message usually indicates that too much memory is allocated for one
or more of the printer link buffers.
To e n a b l eResource Saveafter this message displays, either install
additional memory or set each link buffer back to the Auto value.
Once all link buffers are set to Auto, exit the printer menus to activate
link buffer...

Understanding Printer Messages186
Understanding Printer
Messages
Caring for Your Printer
38 Memory FullThe printer is processing data, but the memory used to store pages is
full.
Reduce the complexity of the page and send it to print again. To
reduce the complexity of the page:
 Simplify the print job by reducing the amount of text or graphics
onapage.
 Reduce the print resolution.
 Delete unnecessary downloaded fonts or macros.
 Install additional memory.
The following button actions are possible:...

187Understanding Printer Messages
Understanding Printer
Messages
Caring for Your Printer
52 Flash FullThere is not enough free space in the flash memory card to hold the
data that was sent.
If the flash is read/write protected, use MarkVision to restore write
access.
PressGoto clear the message and continue processing. All
downloaded fonts and macros not written to flash are deleted.
 To cancel the current job, pressMenu>orororor

Understanding Printer Messages188
Understanding Printer
Messages
Caring for Your Printer
54 Standard
Serial Error
54 Serial
Option x Error
54 Std Par ENA
Connection Lost
54 Par x ENA
Connection LostA serial interface error is detected (framing or parity) on the standard
serial port. This error usually indicates the serial link has not been set
up correctly.
A serial interface error is detected (framing or parity). x represents an
optional serial port 1 through 3. This error usually indicates the serial...

189Understanding Printer Messages
Understanding Printer
Messages
Caring for Your Printer
56 Standard Parallel
Por t Disabled
56 Parallel
Port x DisabledData is sent to the printer across the parallel port, but the parallel port
is disabled. When the error is displayed, the reporting of other errors
is suppressed until the menus are entered or the printer is reset.
 MakesuretheParallel Buffermenu item in thePARALLEL MENU
is not set toDisabled.
PressGoto clear the message. The printer discards any data...

Understanding Printer Messages190
Understanding Printer
Messages
Caring for Your Printer
63 Unformatted
DiskThe printer detects an unformatted hard disk during power on.
Note: Disk operations are not allowed until the hard disk is
formatted. Try the following:
 Format the hard disk usingFormat Diskin theTESTS MENU.
 Send the data again.
If the error condition remains, the hard disk is defective and must be
replaced.
PressGoto clear the message. The hard disk is ignored and normal
operation continues....

191Understanding Printer Messages
Understanding Printer
Messages
Caring for Your Printer
201 Paper Jam
Remove CartridgeThe printer detects a paper jam under the printer cartridge and
further back in the printer. Open the upper front door, remove the
print cartridge, and remove the jammed print material. Reinstall the
cartridge and close the door. See “200 and 201 Paper Jam - Remove
Cartridge” on page 212 for more information.
PressGoto resume printing. The printer prints a new copy of the
page that...

Understanding Printer Messages192
Understanding Printer
Messages
Caring for Your Printer
260 Paper Jam
Check Env FeederThe printer detects a paper jam in the envelope feeder. If the envelope
is visible from the front, move the envelope weight, remove the stack
of envelopes, and pull the jammed envelope straight out. If only a
small portion of the envelope is visible, pull the envelope feeder
straight out of the printer and set it aside. Open the printer upper
front door. Pull the envelope out. If the...

193Understanding Printer Messages
Understanding Printer
Messages
Caring for Your Printer
Change 


The printer is requesting different print material than what has been
loaded in the tray or set in the Paper Size or Paper Type menus. The
display shows the following information:
On line 1 of the display, the tray name ()whereitexpectsto
find the print material is shown.
On line 2 of the display, one of the following is shown:
: A user-defined name, created using the
MarkVision utility, for custom type 1...

Understanding Printer Messages194
Understanding Printer
Messages
Caring for Your Printer
Reattach Envelope
Feeder
Check Duplex
Connection
Reattach
Output Bin x
CheckTrayx
Connection
Check Output
Bin ConnectionThe printer has lost communication with one of the following:
 Optional envelope feeder
Duplexoption
 Optional output expander (x represents 1 through 3 depending on
the number of optional output expanders installed)
 Standard or optional trays (x represents trays 2 through 5
depending on how...