Lexmark Optra S 1250 Manual

95Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
PCL Emul Menu
PCL Emul Menu Selections
Menu ItemValues and Functions of the Menu Items
Font Source Resident*
Download
Flash
Disk
All
TheFont Sourcesetting controls which fonts appear in the Font Names
menu. The values are Resident, Download, Flash, Disk, and All.
For more information, see “Understanding Fonts” on page 329.
Font Name Font position and font name are displayed on both lines of the operator
panel.
(R0...

Using the Operator Panel and Menus96
Using the Operator Panel and
Menus
Using Your Printer
Symbol Set Symbol Set name is displayed on both lines of the operator panel. The
printer displays the symbol set ID and symbol set name.
10U PC-8* (Country specific)
12U PC-850* (Country specific)
A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols used when printing with a selected font. Symbol sets
support the different requirements for languages or specific applications,...

97Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
A4 Width 198 mm*
203 mm
The A4 Width menu item lets you select the width of the logical page for
A4 paper. When you select198 mm, the width of the logical page is
compatible with that of the Hewlett-Packard LaserJet 5 printer. When you
select203 mm, the width of the logical page is wide enough to print eighty
10-pitch characters.
PCL Emul Menu Selections (Continued)
Menu ItemValues and Functions of the Menu Items
*...

Using the Operator Panel and Menus98
Using the Operator Panel and
Menus
Using Your Printer
TRAY
RENUMBER Assign MP Feeder
 Assign Tray x (x represents a tray number from 1 to 5.)
 Assign Env Feedr
 Assign Man Paper
 Assign Man Env
Each of the above menu items supports the following three values:
-Off*
- 0 ... 199
-None
Only installed paper sources are displayed on the operator panel as values.
However, you may setTRAY RENUMBERto uninstalled sources.
TheTRAY RENUMBERmenu item lets you configure your...

99Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Auto CR after LF Off*
On
The Auto CR after LF setting determines whether the printer
automatically performs a carriage return after a line feed control command.
Auto LF after CR Off*
On
The Auto LF after CR setting determines whether the printer automatically
performs a line feed after a carriage return control command.
PCL Emul Menu Selections (Continued)
Menu ItemValues and Functions of the Menu Items
* Factory...

Using the Operator Panel and Menus100
Using the Operator Panel and
Menus
Using Your Printer
PostScript Menu
PostScript Menu Selections
Menu ItemValues and Functions of the Menu Items
PictureGrade Off
On*
Use thePictureGrade™ menu item to improve the quality of gray-scale
printing at 300 and 600 dpi resolution in PostScript Level 2 emulation. If
you selectOff, the printer uses the standard screening parameters. If you
selectOn, different default screening parameters are used to improve the
print quality...

101Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Parallel Menu
The following menu items appear when you selectPARALLEL
MENU.The second level of menus for Parallel Menu are:
STD PARALLEL
The Standard Parallel menu item is displayed as a standard
feature or as an option.
PARALLEL OPT 1
PARALLEL OPT 2
PARALLEL OPT 3
Parallel Option 1 to Parallel Option 3 are displayed if a Parallel
Option card is installed in connectors 1 to 3 on the printer system
board. The...

Using the Operator Panel and Menus102
Using the Operator Panel and
Menus
Using Your Printer
The following menu items set the configuration of the parallel
interface connection.
Parallel Menu Selections
Menu ItemValues and Functions of the Menu Items
PCL SmartSwitch Off
On*
SettingPCL SmartSwitch Onlets the printer examine the data on the
parallel interface connection and select PCL emulation if the data indicates
that is the printer language.
If bothPCL SmartSwitchandPS SmartSwitchare setOff,theprinter...

103Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Parallel Buffer Disabled
Auto*
3K to maximum size allowed
Your printer has a variable buffer size that can be changed from the
operator panel. You can configure the size of the input port buffers to meet
your system needs. The maximum size available for modification depends
on the amount of memory in your printer, the size of the other link buffers,
and if theResource Savesetting isOnorOff. To maximize the range...

Using the Operator Panel and Menus104
Using the Operator Panel and
Menus
Using Your Printer
Honor Init Off*
On
If you use a parallel interface, the Honor Init setting determines whether
the printer honors hardware initialization requests from the computer. The
computer requests initialization by activating the INIT signal on the
parallel interface. Many personal computers activate the INIT signal each
time the computer is turned on and off.
Parallel Mode 1 Off
On*
This setting enables or disables the...