Lexmark Optra S 1250 Manual

75Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Multipage Print Off*
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Use theMultipage Print(N-up) setting to print multiple page images on a
single page. For example, 2-Up means two page images are printed on one
page, 3-up means three page images are printed on one page, and so forth.
The printer uses theMultipage Order,Multipage ViewandMultipage
Bordersettings to determine the order and orientation of the page images
and...

Using the Operator Panel and Menus76
Using the Operator Panel and
Menus
Using Your Printer
Multipage Order Horizontal*
Ve r t i c a l
Reverse Horizontal
Reverse Vertical
TheMultipage Ordersetting determines the positioning of multiple page
images on pages printed usingMultipage Print. You may choose one of
four different orders. The positioning of page images depends on whether
they are sent to the printer as portrait or landscape images. The examples
below show the result of using eachMultipage...

77Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Multipage View Auto*
Long Edge
Short Edge
Use theMultipage Viewsetting to select the orientation of the printed page
with respect to the page images duringMultipage Print.
TheAutosetting allows the printer to choose between portrait and
landscape positioning.
TheLong Edgesetting positions the printed page for reading assuming the
long edge is the top of the page.
TheShort Edgesetting positions the printed page for...

Using the Operator Panel and Menus78
Using the Operator Panel and
Menus
Using Your Printer
Tests Menu
Tests Menu Selections
Menu ItemValues and Functions of the Menu Items
Quick Demo Select this menu item to print the Lexmark demo page.
Print Menus PressSelecttoprintthistestpage.
A list of the user default settings, the installed options, and the amount of
printer memory available prints. This list also shows you the order of menu
items.
Print Fonts PCL Fonts
PS 2 Fonts
SelectPrint Fontsto print a font...

79Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Factory Defaults Restore
Do Not Restore
When you restore the factory default settings:
 All downloaded resources (fonts, macros, and so on) in printer memory
(RAM) are deleted. (Resources residing in the Flash Memory Option or
Hard Disk with Adapter Option are unaffected.)
 All menu settings are returned to the factory default values except:
-Display Language(SETUP MENU) which is the operator panel
display...

Using the Operator Panel and Menus80
Using the Operator Panel and
Menus
Using Your Printer
Defragment Flash Yes
No
TheDefragment Flashmenu item does not display if the installed option
is defective or is Read/Write or Write protected.51 Defective Flash
displays during printer power on. See51 Defective Flashon page 186 for
more information.
Defragmenting copies all undeleted resources stored in flash memory to
printer memory and then reformats the flash memory. When the format
operation is complete, the...

81Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Job Acct Stat Print
Clear
TheJob Acct Statmenu item does not display if the hard disk option is
defective or is Read/Write or Write protected.61 Defective Diskdisplays
during printer power on. See61 Defective Diskon page 189 for more
information.
SelectPrintto print a job accounting statistics listing. SeeJob Accounting
on page 94 for more information on Job Accounting Statistics.
SelectClearJob Acct Statto clear...

Using the Operator Panel and Menus82
Using the Operator Panel and
Menus
Using Your Printer
Job Menu
Note:The printer prohibits entry into theJob Menuif no function
is available when it is accessed.
Job Menu Selections
Menu ItemValues and Functions of the Menu Items
Cancel Job PressSelectto cancel the current print job.
Cancel Jobdisplays only when the printer is processing a print job.
Reset Printer PressSelectto reset the printer.
When you selectReset Printer, the printer resets to the user defaults...

83Using the Operator Panel and Menus
Using the Operator Panel and
Menus
Using Your Printer
Reset Active Bin TheReset Active Binmenu item is displayed if the following conditions
exist:
TheConfigure Binsmenu item in thePaper Menuis set to either
Mailbox, LinkorLink Optionalmode. See page 67 or page 291 for more
information on configuring bins.
Note: If set toMailbox, two or more bins must be grouped by assigning
them the same bin name.
 The printer displays theBusyorWaitingstatus message.
Menu>is...

Using the Operator Panel and Menus84
Using the Operator Panel and
Menus
Using Your Printer
Print Buffer PressSelectto print any data stored in the print buffer.
The menu item is only displayed when theWaitingmessage is displayed.
This occurs if an incomplete job is sent to the printer or if an ASCII job is
being printed. A print screen sent from your host computer or copying a
DOS file are examples.
Job Menu Selections (Continued)
Menu ItemValues and Functions of the Menu Items
* Factory default