Lexmark E120n User Manual

Print quality problems
81
Troubleshooting
Streaks at the bottom of the printed 
page.The long-life photoconductor kit is 
exhausted.Replace the long-life photoconductor 
kit.
Uneven printing
(Print only appears on one side of the 
page.)The toner cartridge is not properly 
installed.Remove and then reinsert the toner 
cartridge.
Incorrect marginsThe Form Size setting in the printer 
driver is different from the paper size 
loaded in the tray. For example, A4 
size paper is loaded into the tray, but 
the...

3
Contents
Chapter 1: Overview  ........................................................................................................... 5
Chapter 2: Using the operator panels  ............................................................................... 8
Overview of the Lexmark E120 operator panel ................................................................................................ 9
Understanding the Lexmark E120 operator panel lights...

Notices
83
Notices
European Community (EC) directives 
conformity
A declaration of conformity with the requirements of the directives 
has been signed by the Director of Manufacturing and Technical 
Support, Lexmark International, S.A., Boigny, France.
This product satisfies the Class B limits of EN 55022 and safety 
requirements of EN 60950.
Japanese VCCI notice
If this symbol appears on your product, the accompanying 
statement is applicable.
Korean MIC statement
If this symbol appears on your product,...

Notices
84
Notices
Laser notice
The printer is certified in the U.S. to conform to the requirements of 
DHHS 21 CFR Subchapter J for Class I (1) laser products, and 
elsewhere is certified as a Class I laser product conforming to the 
requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The 
printer contains internally a Class IIIb (3b) laser that is nominally a 
5 milliwatt gallium arsenide laser operating in the wavelength region 
of 770-795 nanometers. The laser...

Notices
85
Notices
this limited warranty, you may recover actual damages up to the 
limit set forth in the following paragraph.
Lexmarks liability for actual damages from any cause whatsoever 
will be limited to the amount you paid for the product that caused 
the damages. This limitation of liability will not apply to claims by 
you for bodily injury or damage to real property or tangible personal 
property for which Lexmark is legally liable. IN NO EVENT WILL 
LEXMARK BE LIABLE FOR ANY LOST PROFITS,...

3
Contents
Chapter 1: Overview  ........................................................................................................... 5
Chapter 2: Using the operator panels  ............................................................................... 8
Overview of the Lexmark E120 operator panel ................................................................................................ 9
Understanding the Lexmark E120 operator panel lights...

87
Index
Busy 13, 29
Canceling job 14, 30
cartridge region mismatch 16, 32
Close door 31
Error 14, 15, 16, 17, 21, 22, 24, 30, 31, 32, 33, 39, 
40, 43
Load media 36
Manual duplex 20, 37
Not ready 15, 31
Offline 15, 31
Open door 15, 17, 33
Print side two 20, 37
Programming engine code 15, 32
Programming system code 15, 32
Ready/Power Saver 12, 28
Resetting printer 14, 30
Restoring factory defaults 14, 30
Service error 24, 43
Toner low 23, 24, 42, 43
Unsupported toner cartridge 43
Waiting 13, 30
lights 10,...