Lexmark E120n User Manual

 
www.lexmark.com User’s Guide
July 2005
Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc.,
registered in the United States and/or other countries.
© 2005 Lexmark International, Inc. All rights reserved.
740 West New Circle Road
Lexington, Kentucky 40550
E120, E120n
Downloaded From ManualsPrinter.com Manuals 

2
Edition: July 2005
The following paragraph does not apply to any country where 
such provisions are inconsistent with local law: LEXMARK 
INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” 
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. Some states do not allow disclaimer of 
express or implied warranties in certain transactions; therefore, this 
statement may not apply to...

3
Contents
Chapter 1: Overview  ........................................................................................................... 5
Chapter 2: Using the operator panels  ............................................................................... 8
Overview of the Lexmark E120 operator panel ................................................................................................ 9
Understanding the Lexmark E120 operator panel lights...

4
Contents
Chapter 5: Supplies information  ..................................................................................... 65
Supply items needed  ..................................................................................................................................... 66
Assessing supply needs  ................................................................................................................................ 67
Changing the toner cartridge...

3
Contents
Chapter 1: Overview  ........................................................................................................... 5
Chapter 2: Using the operator panels  ............................................................................... 8
Overview of the Lexmark E120 operator panel ................................................................................................ 9
Understanding the Lexmark E120 operator panel lights...

Overview
6
Overview
The power button and the power cord port are located at the rear of the printer, on the left. The USB port and a cable lock 
access point can also be found at the rear of the printer, on the right. The network model (Lexmark E120n) has an Ethernet 
port located just below the USB port.
Note:All future references to the printer refer equally to both models.
The base model (Lexmark E120) has two lights and two buttons.
Rear door release
Power button
Power cord port
USB port
Ethernet...

Overview
7
Overview
The network model (Lexmark E120n) has six lights and two buttons.
Note:The Continue button also functions as a light on the E120n model.
Press and release Continue to resume printing.
Press the Continue  button from the Ready state to print menu and network setup pages.
Press and release Cancel  to cancel the current job.
Press and hold Cancel  until all lights come on to reset. Ready / Data
Load / Remove Paper
ErrorContinue
Cancel
Toner Low/
Replace PC Kit
Paper Jam
Downloaded...

3
Contents
Chapter 1: Overview  ........................................................................................................... 5
Chapter 2: Using the operator panels  ............................................................................... 8
O.
Und
O.
O......
Und
O....
Us.
Pri.....
Res.....
Chapter 3: Print media tasks and tips ............................................................................. 45
Ty.
Cho.....
Pa..
Pre....
Tr..
En.....
L..
Car.....
Sto...
L.
L..
Pre......

Overview of the Lexmark E120 operator panel
9
Using the operator panels
Overview of the Lexmark E120 operator panel
The printer operator panel has two buttons and two lights. Lights indicate the status of the printer. Buttons are used to 
continue or cancel the current print job.
When the printer is turned on, both lights cycle as a self test is performed. Also, when the printer is reset, or when a printer 
setting is changed in the menus, both lights cycle.
To learn more about the panel lights or to...

Overview of the Lexmark E120 operator panel
10
Using the operator panels
Understanding the Lexmark E120 operator panel lights
Operator panel lights mean different things, depending on the sequence. Lights that are off, on, and/or blinking indicate 
printer conditions such as printer status, intervention, or service.
Use the light sequence table to find the message being indicated, then click the message for more information.
Light sequence
Primary light 
sequenceSecondary 
light sequence
MessageReady /...