Lexmark C935hdn User Manual

Menu itemDescription
Print Resolution
2400 IQSpecifies the printed output resolution
Note: 2400 IQ is the factory default setting.
Toner Darkness
1–5Lightens or darkens the printed output
Notes:
4 is the factory default setting.
Selecting a smaller number can help conserve toner.
If Print Mode is set to Black Only, a setting of 5 increases toner density and
darkness to all print jobs.
If Print Mode is set to Color, a setting of 5 is the same as a setting of 4.
Color Saver
On
OffReduces the amount of...

Menu itemDescription
Color Samples
sRGB Display
sRGB Vivid
Display—True Black
Vivid
Off—RGB
US CMYK
Euro CMYK
Vivid CMYK
Off—CMYKPrints sample pages for each of the RGB and CMYK color conversion tables used in the
printer
Notes:
Selecting any setting prints the sample.
Color samples consist of a series of colored boxes along with the RGB or CMYK
combination that creates the color observed. These pages can be used to help
decide which combinations to use to get the desired printed output.
From a browser...

Menu itemDescription
Manual Color
CMYK Image
US CMYK
Euro CMYK
Vivid CMYK
Off
CMYK Text
US CMYK
Euro CMYK
Vivid CMYK
Off
CMYK Graphics
US CMYK
Euro CMYK
Vivid CMYK
OffCustomizes the CMYK color conversions
Notes:
US CMYK is the US factory default setting. US CMYK applies a color conversion
table that tries to produce output that matches SWOP color output.
Euro CMYK is the international factory default setting. Euro CMYK applies a color
conversion table that tries to produce output that matches EuroScale...

Menu itemDescription
Remove Held Jobs
Confidential
Held
Not Restored
AllRemoves confidential and held jobs from the printer hard disk
Notes:
Selecting a setting affects only print jobs that are resident in the printer.
Bookmarks, jobs on USB flash memory devices, and other types of held jobs
are not affected
Selecting Not Restored removes all Print and Hold jobs that were not restored
from the disk.
Format Flash
No
YesFormats the flash memory. Flash memory refers to the memory added by installing
a flash...

Menu itemDescription
Job Acct Stat
Print
ClearPrints a list of all stored job statistics or deletes the information from the printer hard
disk
Notes:
A printer hard disk must be installed in the printer and operating properly for
this menu item to be available.
Selecting Print prints a list of statistics.
Clear deletes all job statistics stored on the printer hard disk. Clearing
job account statistics appears on the display.
The Clear selection will not appear if Job Accounting is set to MarkTrackTM.
Hex...

PostScript menu
Menu itemDescription
Print PS Error
On
OffPrints a page containing the PostScript error
Note: Off is the factory default setting.
Font Priority
Resident
Flash/DiskEstablishes the font search order
Notes:
Resident is the factory default setting.
A formatted flash memory option card or printer hard disk must be
installed in the printer and operating properly for this menu item to be
available.
The flash memory option or printer hard disk cannot be Read/Write,
Write, or password protected....

Menu itemDescription
Symbol Set
10U PC‑8
12U PC‑850Specifies the symbol set for each font name
Notes:
10U PC‑8 is the US factory default setting.
12U PC‑850 is the international factory default setting.
A symbol set is a set of alphabetic and numeric characters, punctuation,
and special symbols. Symbol sets support the different languages or
specific programs such as math symbols for scientific text. Only the
supported symbol sets are shown.
PCL Emulation Settings
Point Size
1.00–1008.00Changes the point...

Menu itemDescription
PCL Emulation Settings
Auto CR after LF
On
OffSpecifies whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command
Notes:
Off is the factory default setting.
Setting alterations are duplicated in the PPDS menu.
PCL Emulation Settings
Auto LF after CR
On
OffSpecifies whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command
Notes:
Off is the factory default setting.
Setting alterations are...

PPDS menu
Menu itemDescription
Orientation
Portrait
LandscapeSets the orientation of the text and graphics on the page
Notes:
Portrait is the factory default setting.
Settings are duplicated in the PCL Emulation menu.
Lines per Page
1–255Sets the number of lines that print on each page
Notes:
64 is the factory default setting.
The printer sets the amount of space between each line based on the
Lines per Page, Paper Size, and Orientation settings. Select the desired
Paper Size and Orientation before...

Menu itemDescription
Auto CR after LF
On
OffSpecifies whether the printer automatically performs a carriage return (CR) after
a line feed (LF) control command
Notes:
Off is the factory default setting.
Settings are duplicated in the PCL Emulation menu.
Auto LF after CR
On
OffSpecifies whether the printer automatically performs a line feed (LF) after a
carriage return (CR) control command
Notes:
Off is the factory default setting.
Settings are duplicated in the PCL Emulation menu.
HTML menu
Menu...