Lexmark C935hdn User Manual

Menu itemDescription
Portrait Width
3–48 inches
76–1219 mmSets the portrait width
Notes:
If the width exceeds the maximum, the printer uses the maximum
width allowed.
12 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
305 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
Portrait Height
3–48 inches
76–1219 mmSets the portrait height
Notes:
If the height exceeds the maximum, the printer uses the maximum
height...

Menu ItemDescription
Configure Bins
Mailbox
Link
Link Optional
Type AssignmentSpecifies configuration options for output bins
Notes:
Mailbox is the factory default setting.
The booklet‑maker bin (Bin 2) cannot be linked to
another bin. Bin 2 folds all print jobs.
The Mailbox setting treats each bin as a separate
mailbox.
The Link setting links together all available output
bins.
The Link Optional setting links together all available
output bins except the standard bin.
The Type Assignment setting assigns...

Menu itemDescription
Network Setup Page
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This menu item appears only for network printers or printers connected to
print servers.
The page prints when this item is selected.
Network  Setup Page
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
This selection is available when more than one network option is...

Settings menu
Setup menu
Menu itemDescription
Display Language
English
Francais
Deutsch
Italiano
Espanol
Dansk
Norsk
Nederlands
Svenska
Portuguese
Suomi
Russian
Polski
Magyar
Turkce
Cesky
Simplified Chinese
Traditional Chinese
Korean
JapaneseSets the language of the text appearing on the display
Note: All languages may not be available for all printers.
Power Saver
Disabled
2–240Sets the amount of time in minutes the printer waits after a job is
printed before it goes into a reduced power state
Notes:...

Menu itemDescription
Standby Mode
Disabled
1–240Sets the amount of time in minutes the printer waits—in a
ready‑to‑print state, after a job is printed—before passing into
Power Saver mode
Notes:
Disabled is the factory default setting.
This setting must be less than or equal to the Power Saver
mode setting.
Alarms
Alarm Control
Toner Alarm
Staple Alarm
Hole Punch AlarmSets an alarm to sound when the printer requires operator
intervention
Available selections for each alarm type are:
Off
Single...

Menu itemDescription
Timeouts
Network Job Timeout
0–255Sets the amount of time in seconds that a network print job can
take before it is canceled
Notes:
90 seconds is the factory default setting.
A setting value of 0 disables the timeout.
If a value of 1–9 is selected, the setting will be saved as 10.
Print Recovery
Auto Continue
Disabled
5–255Lets the printer automatically continue printing from certain offline
situations when not resolved within the specified time period
Notes:
Disabled is the factory...

Menu itemDescription
Print Area
Normal
Whole PageSets the logical and physical printable area
Notes:
Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
The Whole Page setting allows the image to be moved into
the non‑printable area defined by the Normal setting, but
the printer will clip the image at the Normal setting
boundary.
The Whole Page setting only affects pages printed using a...

Menu itemDescription
Factory Defaults
Do Not Restore
RestoreReturns the printer settings to the factory default settings
Notes:
Do Not Restore is the factory default setting. Do Not Restore
keeps the user‑defined settings.
Restore returns all printer settings to the factory default
settings except Network/Ports menu settings. All downloads
stored in RAM are deleted. Downloads stored in flash
memory or on a printer hard disk are not affected.
Finishing menu
Menu itemDescription
Duplex
On
OffSpecifies...

Menu itemDescription
Separator Sheets
None
Between Copies
Between Jobs
Between PagesSpecifies whether blank separator sheets are inserted
Notes:
None is the factory default setting.
Between Copies inserts a blank sheet between each copy of a print job if
Collation is set to On. If Collation is set to Off, a blank page is inserted between
each set of printed pages, such as after all page 1s, all page 2s, and so on.
Between Jobs inserts a blank sheet between print jobs.
Between Pages inserts a blank sheet...

Menu itemDescription
Staple Job
Off
Auto
Front
Back
2 Staples
4 StaplesSpecifies the number and position of staples on a print job
Notes:
This menu is available only when the finisher is installed.
Off is the factory default setting. Print jobs are not stapled.
Auto corner staples every print job.
Envelopes are not stapled.
Hole Punch
On
OffSpecifies whether a print job receives hole‑punch finishing
Notes:
This menu is available only when the finisher is installed.
Off is the factory default setting....