Lexmark C935dn User Manual
Here you can view all the pages of manual Lexmark C935dn User Manual. The Lexmark manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 131
When 88 Replace Cyan toner, 88 Replace Magenta toner, 88 Replace Yellow toner, or 88 Replace Black toner appears, you must replace the specified toner cartridge. The recommended toner cartridges specifically designed for the printer are: Part namePart number Cyan High Yield Toner Cartridge C930H2CG Magenta High Yield Toner Cartridge C930H2MG Yellow High Yield Toner Cartridge C930H2YG Black High Yield Toner Cartridge C930H2KG Ordering photoconductors When 84 Black pc unit life warning or 84 color pc unit...
Page 132
Replacing supplies Replacing the waste toner box Replace the waste toner box when 82 Replace waste toner box appears. The printer will not continue printing until the waste toner box is replaced. 1Waste toner box 2Door E6 3Door E 4Printhead lens cleaner 5E6 Door tab Maintaining the printer132 Downloaded From ManualsPrinter.com Manuals
Page 133
1Unpack the replacement waste toner box and accessories. 2Open Door E (front printer door). Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. Maintaining the printer133 Downloaded From ManualsPrinter.com Manuals
Page 134
3Grasp the E6 Door tab, and then push the door down. 4Remove the old printhead lens cleaner from Door E, and then discard it. 5Remove the waste toner box. Maintaining the printer134 Downloaded From ManualsPrinter.com Manuals
Page 135
6Place the plastic cover over the waste toner box. 7Place the waste toner box in the recycling bag. 8Use the new printhead lens cleaner to clean the printhead lenses. Maintaining the printer135 Downloaded From ManualsPrinter.com Manuals
Page 136
9Insert the new waste toner box. 10Place the new printhead lens cleaner in the notches of Door E. 11Close Door E6. Maintaining the printer136 Downloaded From ManualsPrinter.com Manuals
Page 137
12Close Door E. 13Remove all paper from the printer paper path. Visit www.lexmark.com/recycling to learn how to recycle the waste toner box. Cleaning the printhead lenses Clean the printhead lenses when you replace the waste toner box or when you encounter print quality problems. 1Waste toner box 2Door E6 3Door E (front door) 4Printhead lens cleaner 5E6 Door tab Maintaining the printer137 Downloaded From ManualsPrinter.com Manuals
Page 138
1Open Door E (front door). Warning—Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. 2Grasp the E6 Door tab, and then push the door down. 3Remove the waste toner box. 4Locate and remove the printhead lens cleaner from Door E. Note: If you are replacing the waste toner box, use the printhead lens cleaner that shipped with it. Maintaining the printer138 Downloaded From ManualsPrinter.com Manuals
Page 139
5Insert the padded tip of the printhead lens cleaner into the first printhead lens opening. 6Push the printhead lens cleaner all the way to the back of the lens, and then pull it out. 7Clean the remaining three printhead lenses. Maintaining the printer139 Downloaded From ManualsPrinter.com Manuals
Page 140
8Insert the waste toner box. 9Place the printhead lens cleaner in the notches of Door E. 10Close Door E6. Maintaining the printer140 Downloaded From ManualsPrinter.com Manuals