Lexmark C920 User Manual

Windows
21
Installing drivers for network printing
gCheck the following to make sure the printer was successfully shared.
The printer object in the Printers folder now has a shared indicator. For example, in Windows NT 4.0, a 
hand appears under the printer object.
Browse Network Neighborhood. Find the host name of the server, and look for the shared name 
assigned to the printer.
Install the printer driver (or subset) on network clients
Using the point and print method
Note:This method is usually the...

Macintosh
22
Installing drivers for network printing
Configuring Drag‘N’Print
Note:Drag’N’Print™ support is not available for all printers.
For detailed configuration instructions, launch the drivers CD, click View Documentation, and click Software and utilities.
Macintosh
Note:A PostScript Printer Description (PPD) file provides detailed information about the capabilities of a 
printer to UNIX or Macintosh computers.
To print to a network printer, each Macintosh user must install a custom PostScript...

Macintosh
23
Installing drivers for network printing
7Verify printer installation:
aOpen Finder, click Applications, and click Tex t E d i t.
bChoose Print from the “File” menu.
cChoose Summary from the “Copies & Pages” pop-up menu.
Note:Look on the Network Setup page under the “AppleTalk” heading to find the default name of the printer 
to know which printer to select.
If the PPD file displayed in the Summary window is correct for the printer, then printer setup is complete.
If the PPD file displayed...

UNIX/Linux
24
Installing drivers for network printing
fClick Close when installation is complete.
Note:A PPD for the printer is also available in a downloadable software package on the Lexmark Web site 
at www.lexmark.com.
Step 2: Create a desktop printer
1In the Chooser, select the LaserWriter 8 driver.
2For a routed network, select the default zone from the list. For the zone to select, look on the Network Setup page 
under AppleTalk for Zone.
3Select the new printer from the list.
4For printer to...

Installing and removing options
25
4Installing and removing options
CAUTION:If you are installing memory or option cards sometime after setting up the printer, turn the printer off 
and unplug the power cord before continuing. If you have any other devices connected to the printer, 
turn them off as well and unplug any cables going to the printer.
You can customize your printer memory capacity and connectivity by adding optional cards. You can also use these 
instructions to help you locate an option for...

Removing the system board access cover
26
Installing and removing options
Removing the system board access cover
You must remove the system board access cover to install memory cards, a firmware card, a hard disk, or an option card.
CAUTION:This printer weighs 77–107 kg (170–235 Ib) and requires four people to lift. Anytime you move or lift 
the printer, make sure you have enough people to help. Use the handholds located on the sides to lift 
the printer.
This printer has a Kensington Security Slot,...

Removing the system board access cover
27
Installing and removing options
You need a number 2 Phillips screwdriver to remove the system board access cover.
1Loosen the eight screws on the system board access cover. Do not remove the screws completely.
Warning:The system board access cover must be replaced before operating the printer.
2Slide the cover up and away from the printer.
Screws
Screws
Downloaded From ManualsPrinter.com Manuals 

Removing the system board access cover
28
Installing and removing options
3Use the illustration to locate the connector for the card you want to install or remove. 
Parallel connector
Ethernet connector
USB connector
Option card cover Optional hard disk
Option cardMemory connectors Flash memory or 
firmware card 
connectors
Downloaded From ManualsPrinter.com Manuals 

Installing a memory card
29
Installing and removing options
Installing a memory card
Complete the following instructions to install a printer memory card.
Note:Memory cards designed for other Lexmark printers may not work with your printer.
1Remove the system board access cover. (See Removing the system board access cover.)
2Push open the latches on both ends of the memory card connector.
3Unpack the memory card.
Warning:Printer memory cards are easily damaged by static electricity. Touch something metal...

Installing a hard disk
30
Installing and removing options
3Holding the flash memory or firmware card by the locking clips, align the plastic pins on the card with the holes on 
the system board.
4Push the flash memory or firmware card firmly into place, and release the locking clips.
The entire length of the connector on the flash memory or firmware card must touch the system board and be 
locked into the connector.
Be careful not to damage the connectors.
Installing a hard disk
Warning:Hard disks are...