Lexmark C782n XL User Manual

Installing an output expander
11
Installing and removing options
Installing an output expander
Your printer supports an optional output expander that lets you stack up to 650 sheets of paper in one bin.
Note:After you unpack the output expander, install it immediately. Otherwise, the edges of the mounting 
brackets could damage tabletops or fabrics.
1Unpack the output expander and remove any packing material. 
2Remove the printer top cover.
Warning:The output expander tray is designed to hold the weight...

Installing an output expander
12
Installing and removing options
4Attach the printer top cover to the output expander.
5Attach the output expander paper bail to the top cover.
Downloaded From ManualsPrinter.com Manuals 

Installing a 5-bin mailbox
13
Installing and removing options
Installing a 5-bin mailbox
Your printer supports a 5-bin mailbox that lets you collate and stack up to 500 sheets of paper.
Note:After you unpack the mailbox, install it immediately. Otherwise, the edges of the mounting brackets 
could damage tabletops or fabrics.
1Unpack the mailbox and remove any packing material.
2Remove the printer top cover.
Warning:The mailbox is designed to hold the weight of print material only. Do not use it as a...

Installing a 5-bin mailbox
14
Installing and removing options
4Attach the printer top cover to the mailbox.
5Attach the mailbox paper bail to the top cover.
Downloaded From ManualsPrinter.com Manuals 

Installing a StapleSmart finisher
15
Installing and removing options
Installing a StapleSmart finisher
Your printer supports a StapleSmart finisher. See the information sheet included with the finisher for detailed installation 
instructions. 
Installing memory and option cards
CAUTION:If you are installing memory or option cards sometime after setting up the printer, turn the printer off 
and unplug the power cord before continuing. If you have any other devices connected to the printer, 
turn them off...

Installing memory and option cards
16
Installing and removing options
Installing a memory card
Follow the instructions in this section to install a printer memory card. Memory cards must have 100-pin connectors.
Note:Memory cards designed for other Lexmark printers may not work with your printer.
1 Remove the system board access cover. For more information, see Removing the system board access cover.
Warning:Memory cards are easily damaged by static electricity. Touch something metal on the printer...

Installing memory and option cards
17
Installing and removing options
Installing an “option-added” firmware card
Follow the instructions in this section to install an optional “option-added” firmware or flash memory card.
Note:“Option-added” firmware and flash memory cards offered for other Lexmark printers cannot be used 
with your printer.
“Option-added” fiOnly one of each type of card is supported.
Warning:“Option-added” firmware and flash memory cards are easily damaged by static electricity. Touch...

Installing memory and option cards
18
Installing and removing options
Installing a hard disk
Follow the instructions in this section to install an optional hard disk. You need a small flathead screwdriver to attach the 
hard disk to the mounting plate.
Warning:Hard disks are easily damaged by static electricity. Touch something metal on the printer before you 
touch a disk.
If an option card has been installed, you may need to remove it before installing the hard disk.
1Remove the system board access...

Installing memory and option cards
19
Installing and removing options
7Press the ribbon cable connector into the connector on the system board.
8Flip the hard disk over, and then press the three posts on the mounting plate into the holes on the system board. 
The hard disk snaps into place.
Downloaded From ManualsPrinter.com Manuals 

Installing memory and option cards
20
Installing and removing options
Installing an option card
Your printer has one expansion card slot that supports a number of option cards. The following table describes their 
function.
Note:The network models ship with an integrated Ethernet print server already installed.
Note:You need a small Phillips screwdriver to install these options.
1Remove the system board access cover. For more information, see Removing the system board access cover.
2Remove the screw from...